Return-Path: Message-ID: From: Embedded System To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] Can't init device hci0 (all information included), help! Thanx a lot!!! In-Reply-To: <1106500482.9269.46.camel@pegasus> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII References: <1106500482.9269.46.camel@pegasus> Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 24 Jan 2005 11:54:23 +0800 hi, Marcel Thanks for the info, but it still doesn't work I have updated my kernel to 2.6.10-mh2, and with "modprobe hci_usb isoc=0", but when I plug the usb doggle the first time, screen prints out : usb 1-1 : can't set config #1, error -32 usb 1-1 : khubd timed out on ep0in and I pull out and plug it again, it prints out only the second line as: usb 1-1 : khubd timed out on ep0in and the outputs(/proc/bus/usb/devices, lsusb ) as follows: 1, output from /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.10-mh2 uhci_hcd S: Product=Intel Corp. 82371AB/EB/MB PIIX4 USB S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a12 ProdID=0001 Rev= 4.87 C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) 2, lsusb output ...... Bus 001 Device 005: ID 0a12:0001 Cambridge Silicon Radio Ltd. usb 1-1: lsusb timed out on ep0in usb 1-1: lsusb timed out on ep0in .... Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 224 bDeviceSubClass 1 bDeviceProtocol 1 bMaxPacketSize0 64 idVendor 0x0a12 Cambridge Silicon Radio Ltd. idProduct 0x0001 bcdDevice 4.87 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 193 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 224 bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type none wMaxPacketSize 16 bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type none wMaxPacketSize 64 bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type none wMaxPacketSize 64 bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 224 bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 0 bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 0 bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 224 bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 9 bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 9 bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 2 bNumEndpoints 2 bInterfaceClass 224 bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 17 bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 17 bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 2 bInterfaceClass 224 bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 25 bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 25 bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 4 bNumEndpoints 2 bInterfaceClass 224 bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 33 bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 33 bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 5 bNumEndpoints 2 bInterfaceClass 224 bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 49 bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 1 Transfer Type Isochronous Synch Type none wMaxPacketSize 49 bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 254 bInterfaceSubClass 1 bInterfaceProtocol 0 iInterface 0 unknown descriptor type: 07 21 07 88 13 ff 03 Language IDs: none (cannot get min. string descriptor; got len=-1, error=110:Connection timed out) Best Rgds, Andy On Sun, 23 Jan 2005 18:14:42 +0100, Marcel Holtmann wrote: > Hi Andy, > > there is no need to post this twice ;) > > > when I call "hciconfig hci0 up", it prints: > > Can't init device hci0: Connection timed out (110) > > > > Working environment is as follows: > > 1, Vmware workstation 5.0 + Redhat 9.0, with kernel 2.6.8.1, bluez 2.14 > > 2, Bluetooth subsystem enabled > > 3, Billionton BlueTooth Dongle Class I USBBTC1A > > 4, "/etc/rc.d/init.d/bluetooth start" already run > > > > Outputs (lspci, lsmod, /proc/bus/usb/devices/,hciconfig, dmesg) > > 1, output from lspci > > 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB > > > > 2, output from lsmod > > Module Size Used by > > ehci_hcd 42688 0 > > hci_usb 13184 0 > > rfcomm 38712 0 > > l2cap 24128 3 rfcomm > > autofs 15520 0 > > ohci1394 34912 0 > > ieee1394 110384 1 ohci1394 > > parport_pc 25696 0 > > parport 40672 1 parport_pc > > bluetooth 48292 3 hci_usb,rfcomm,l2cap > > usbhid 24800 0 > > uhci_hcd 33160 0 > > usbcore 127540 6 ehci_hcd,hci_usb,usbhid,uhci_hcd > > > > 3, output from /proc/bus/usb/devices > > > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > S: Manufacturer=Linux 2.6.8.1 uhci_hcd > > S: Product=Intel Corp. 82371AB/EB/MB PIIX4 USB > > S: SerialNumber=0000:00:07.2 > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > > D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > > P: Vendor=0a12 ProdID=0001 Rev= 4.87 > > C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA > > I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) > > > > 4, output from hciconfig > > hci0: Type: USB > > BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 > > DOWN > > RX bytes:0 acl:0 sco:0 events:0 errors:0 > > TX bytes:0 acl:0 sco:0 commands:0 errors:0 > > Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > > Packet type: DM1 DH1 HV1 > > Link policy: > > Link mode: SLAVE ACCEPT > > > > 8, output from dmesg > > uhci_hcd 0000:00:07.2: suspend_hc > > uhci_hcd 0000:00:07.2: wakeup_hc > > uhci_hcd 0000:00:07.2: port 1 portsc 0083 > > hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s > > hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 > > usb 1-1: new full speed USB device using address 3 > > usb 1-1: skipped 1 descriptor after interface > > usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0 > > usb 1-1: hotplug > > usb 1-1: adding 1-1:1.0 (config #1, interface 0) > > usb 1-1:1.0: hotplug > > hci_usb 1-1:1.0: usb_probe_interface > > hci_usb 1-1:1.0: usb_probe_interface - got id > > usb 1-1: adding 1-1:1.1 (config #1, interface 1) > > usb 1-1:1.1: hotplug > > usb 1-1: adding 1-1:1.2 (config #1, interface 2) > > usb 1-1:1.2: hotplug > > hci_usb 1-1:1.2: usb_probe_interface > > hci_usb 1-1:1.2: usb_probe_interface - got id > > > > > > I really appreciate your kindly help and your time! if you need any > > further information > > please let me know, thanx again! > > > > Is it a kernel problem? Bluez bug? Configuration Problem? Vmware > > Restrictions? or what else? > > maybe the ISOC transfers are not working perfect within VMware. You can > disable them with isoc=0 when loading hci_usb. And you should try a > newer kernel. Check out 2.6.10-mh2 or 2.6.11-rc2. > > Regards > > Marcel > > ------------------------------------------------------- > This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting > Tool for open source databases. Create drag-&-drop reports. Save time > by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. > Download a FREE copy at http://www.intelliview.com/go/osdn_nl > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users > ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users