Return-Path: Message-ID: From: Embedded System To: bluez-users@lists.sourceforge.net Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Subject: [Bluez-users] Can't init device hci0 (all information included), help! Thanx a lot!!! Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 23 Jan 2005 18:10:50 +0800 hi, everyone when I call "hciconfig hci0 up", it prints: Can't init device hci0: Connection timed out (110) Working environment is as follows: 1, Vmware workstation 5.0 + Redhat 9.0, with kernel 2.6.8.1, bluez 2.14 2, Bluetooth subsystem enabled 3, Billionton BlueTooth Dongle Class I USBBTC1A 4, "/etc/rc.d/init.d/bluetooth start" already run Outputs (lspci, lsmod, /proc/bus/usb/devices/,hciconfig, dmesg) 1, output from lspci 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB 2, output from lsmod Module Size Used by ehci_hcd 42688 0 hci_usb 13184 0 rfcomm 38712 0 l2cap 24128 3 rfcomm autofs 15520 0 ohci1394 34912 0 ieee1394 110384 1 ohci1394 parport_pc 25696 0 parport 40672 1 parport_pc bluetooth 48292 3 hci_usb,rfcomm,l2cap usbhid 24800 0 uhci_hcd 33160 0 usbcore 127540 6 ehci_hcd,hci_usb,usbhid,uhci_hcd 3, output from /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8.1 uhci_hcd S: Product=Intel Corp. 82371AB/EB/MB PIIX4 USB S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a12 ProdID=0001 Rev= 4.87 C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) 4, output from hciconfig hci0: Type: USB BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RX bytes:0 acl:0 sco:0 events:0 errors:0 TX bytes:0 acl:0 sco:0 commands:0 errors:0 Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DH1 HV1 Link policy: Link mode: SLAVE ACCEPT 8, output from dmesg uhci_hcd 0000:00:07.2: suspend_hc uhci_hcd 0000:00:07.2: wakeup_hc uhci_hcd 0000:00:07.2: port 1 portsc 0083 hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 1-1: new full speed USB device using address 3 usb 1-1: skipped 1 descriptor after interface usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: hotplug usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: hotplug hci_usb 1-1:1.0: usb_probe_interface hci_usb 1-1:1.0: usb_probe_interface - got id usb 1-1: adding 1-1:1.1 (config #1, interface 1) usb 1-1:1.1: hotplug usb 1-1: adding 1-1:1.2 (config #1, interface 2) usb 1-1:1.2: hotplug hci_usb 1-1:1.2: usb_probe_interface hci_usb 1-1:1.2: usb_probe_interface - got id I really appreciate your kindly help and your time! if you need any further information please let me know, thanx again! Is it a kernel problem? Bluez bug? Configuration Problem? Vmware Restrictions? or what else? -andy ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users