Return-Path: To: bluez-users@lists.sourceforge.net From: Paul Ionescu Message-ID: References: <41E853A9.5030304@xmission.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Subject: [Bluez-users] Re: btsco and Jabra BT 110 experience Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 15 Jan 2005 00:44:18 +0100 Hi Brad, I appended some info bellow. For some reason, btsco does not work with specified channel, but btsco2 does. here is the info without specified channel: ./btsco 00:07:A4:1D:FB:56 Device is 1:0 Voice setting: 0x0060 RFCOMM channel 1 connected recieved AT+CKPD=200 opened hwdep connected SCO channel Setting sco fd Done setting sco fd recieved AT+VGS=15 Sending up speaker change 15 and with specified channel (using btsco2 as btsco does not work here): ./btsco2 00:07:A4:1D:FB:56 2 Device is 1:0 Voice setting: 0x0060 RFCOMM channel 2 connected recieved AT+BRSF=24 recieved AT+CIND=? opened hwdep connected SCO channel Setting sco fd Done setting sco fd On Fri, 14 Jan 2005 16:20:09 -0700, Brad Midgley wrote: > it sounds like you're saying the automatic channel detection incorrectly > chooses channel 1 instead of 2. can you tell me what btsco prints out when > it's launched without the channel specified? > > Brad ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users