Return-Path: Subject: Re: [Bluez-users] Piconet problems From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1105627179.7961.226.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 13 Jan 2005 15:39:39 +0100 Hi Jers, > hcid was not running. I've solved the inconsistency but no my problem. > > Hi tried to create connection on slave1 side by > # hcitool cc > and so > # hcitool con > lists me the established connection. send us the outputs of "hciconfig -a" for all of your devices. And don't play with "hcitool cc". If you wanna test stuff then use l2test. > After that, I tried to create the second connection on slave2 side by running the same command (hcitool cc ) and I obtain the following error: > # Can't create connectio: input/output error. Run "hcidump -x" as root and show us the output. Regards Marcel ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users