Return-Path: Subject: Re: [Bluez-users] Piconet problems From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: References: Content-Type: text/plain Message-Id: <1105613213.7961.158.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 13 Jan 2005 11:46:53 +0100 Hi Jers, > > > # Default link mode > > > # none - no specific policy > > > # accept - always accept incoming connections > > > # master - become master on incoming connections, > > > # deny role switch on outgoing connections > > > # > > > lm accept,master; > > > # > > > #lm accept; > > > > you changed this. Why? There can't be two device with a master role in > > the same a piconet. > > I know that. Maybe I wasn't accurate in the description of my problem. I'm > sorry... > The above script is the hcid.conf file of the master. For slaves I have "lm > accept". this is not needed, because you use "pand --master ..." and this is enought to force the role switch. > I want to create a piconet with a single master and two slaves. > In a previous corrispondance, you suggested me: > - to upgrade my bluez packages. I did that. > - to check the limitation for firmware pre HCI 16.4. I did that. > > - to check the link policy because the "hciconfig -a" command showed it no > set for any device. This is my current problem. > > "hciconfig -a" still shows me that there is no link policy set for any > device but, for all dongles, in the hcid.conf I have Is hcid running? Regards Marcel ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users