Return-Path: Date: Thu, 10 Feb 2005 15:01:12 -0500 (EST) From: "Jay W. Summet" To: bluez-users@lists.sourceforge.net Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Subject: [Bluez-users] Re: Trouble pairing with new phone... Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: hciconfig -a says: hci0: Type: UART BD Address: 00:10:60:AA:FB:C9 ACL MTU: 192:8 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN AUTH ENCRYPT RX bytes:357 acl:0 sco:0 events:18 errors:0 TX bytes:849 acl:0 sco:0 commands:17 errors:0 Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ (0)' Class: 0x000100 Service Classes: Unspecified Device Class: Computer, Uncategorized HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d Manufacturer: Cambridge Silicon Radio (10) This is a standard PCMCIA Zoom bluetooth card, worked with a Sony T610 phone before, still works with the palm T. When I do hcitool info 00:0A:D9:1D:E6:B2 I get the following error: Requesting information ... Can't create connection: Input/output error The hcidump -x output of the above is: HCIDump - HCI packet analyzer ver 1.12 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 B2 E6 1D D9 0A 00 18 CC 02 00 00 00 01 > HCI Event: Command Status (0x0f) plen 4 00 01 05 04 > HCI Event: Link Key Request (0x17) plen 6 B2 E6 1D D9 0A 00 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 B2 E6 1D D9 0A 00 > HCI Event: Command Complete (0x0e) plen 10 01 0C 04 00 B2 E6 1D D9 0A 00 > HCI Event: PIN Code Request (0x16) plen 6 B2 E6 1D D9 0A 00 < HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6 B2 E6 1D D9 0A 00 > HCI Event: Command Complete (0x0e) plen 10 01 0E 04 00 B2 E6 1D D9 0A 00 > HCI Event: Connect Complete (0x03) plen 11 06 29 00 B2 E6 1D D9 0A 00 01 00 So it looks like because the phone isn't paired with BlueZ, it won't give the information hictool is requesting... As to the "role switch". I'm not doing anything explicitly. hcid.conf has the following entry which may be involved: # Default link mode # none - no specific policy # accept - always accept incoming connections # master - become master on incoming connections, # deny role switch on outgoing connections # #lm accept,master; # lm accept; # Default link policy # none - no specific policy # rswitch - allow role switch # hold - allow hold mode # sniff - allow sniff mode # park - allow park mode # #lp hold,sniff; # lp rswitch,hold,sniff,park; (If I use lm accept,master instead of the lm accept that is in the file, the phone still does not pair...I have also tried using lp hold,snif instead of the lp rswitch,hold,sniff,park same result, phone does not pair.) Jay ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users