Return-Path: Message-ID: From: hariharan veerappan To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] HCI Config returns Can't Init device In-Reply-To: <1112008411.9016.11.camel@pegasus> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 References: <1112008411.9016.11.camel@pegasus> Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 28 Mar 2005 17:03:11 +0530 Hi, i have patched kernel 2,4,18 with the yours respective patch. Since i am using Samsung S3C2440 processor, smasung officially supports only the kernel 2.4.18. hence i need to get the best result of bluetooth using this kernel version 2.4.18 only. Facing the problem is , Can't init device hci0. Connection timed out(110) ERROR. i am using 2.4.18 kernel with the RFMD serial port bluetooth module. i have ported the Bluez Stack and HCI_H4 protocol modules. The RFMD device is get attached by hciattach /dev/ttyS0 swave 115200 flow the patch added in the hciattach.c is soft reset functionality included before sending param acess command in SWAVE function and after that reset again. This attaches my UART dongle with the HCI layer. When i try to hciconfig uration i am getting the following errors. hciconfig hci0 up But i could have functionality with Kernel 2.6. The HCI config works fine. Is there any patch to imply for the 2..4 kernel. Thanks and regards Hariharan.v. On Mon, 28 Mar 2005 13:13:31 +0200, Marcel Holtmann wrote: > Hi Hariharan, > > > > > Can't init device hci0. Connection timed out(110) ERROR. > >> > i am using 2.4.18 kernel with the RFMD serial port bluetooth > > module. i have ported the Bluez Stack and HCI_H4 protocol modules. The > > RFMD device is get attached by > > > > hciattach /dev/ttyS0 swave 115200 flow > > > > the patch added in the hciattach.c is soft reset functionality > > included before sending param acess command in SWAVE function and > > after that reset again. This attaches my UART dongle with the HCI > > layer. > > > > When i try to hciconfig uration i am getting the following errors. > > > > hciconfig hci0 up > > But i could have functionality with Kernel 2.6. The HCI config works fine. > > > > Is there any patch to imply for the 2..4 kernel. > > you need at least use my 2.4.18-mh15 patch. However if the 2.6 kernel > works then use it. > > Regards > > Marcel > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users