Message-ID: <f16b04cf050327221766330331@mail.gmail.com>
From: hariharan veerappan <hariharanneevee@gmail.com>
To: bluez-users@lists.sourceforge.net
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Subject: [Bluez-users] HCI Config returns Can't Init device
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Reply-To: bluez-users@lists.sourceforge.net
Date: Mon, 28 Mar 2005 11:47:59 +0530

Hi,
    i am using 2.4.18 kernel with the RFMD serial port bluetooth
module. i have ported the Bluez Stack and HCI_H4 protocol modules. The
RFMD device is get attached by

hciattach /dev/ttyS0 swave 115200 flow

the patch added in the hciattach.c is soft reset functionality
included before sending param acess command in SWAVE function and
after that reset again. This attaches my UART dongle with the HCI
layer.

When i try to hciconfig uration i am getting the following errors.

hciconfig hci0 up

Can't init device hci0. Connection timed out(110) ERROR.

But i could have functionality with Kernel 2.6. The HCI config works fine. 

Is there any patch to imply for the 2..4 kernel.

Please advise
Thanks and regards
Hariharan.v.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users