Return-Path: Subject: Re: [Bluez-users] Has anyone seen these problems with the CSR BlueCore and BlueZ before ? From: Marcel Holtmann To: BlueZ Mailing List In-Reply-To: <4239B037.4020803@csr.com> References: <4239B037.4020803@csr.com> Content-Type: text/plain Message-Id: <1111078208.9741.2.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 17 Mar 2005 17:50:08 +0100 Hi Steven, > would it be a good idea to add reading of the panic and > fault codes to the CSR specific section of hcitool revision? Or, > get BlueZ to read the panic code when the inerface is brought up. If > it's non-zero and < 0x0100 write it to an event log and then zero it. the kernel code should be complete vendor independent and thus adding this to "hciconfig hci0 revsion" is the only option. Are both variables UINT16? If yes, then it will be quite easy to add this information to the hciconfig command. What document should I read for more information about the panic/fault code meanings? Regards Marcel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users