Return-Path: From: Attila Zsigmond To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] Something strange with minicom MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Message-Id: <200504300003.22570@ByZsA> Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 30 Apr 2005 00:03:21 +0200 > are you sure that you wanna be in security mode 3. Using auth and > encrypt is not advisable. I turned off but it makes no difference... > Make sure that you grep the initial HCI and L2CAP connection setup, > because otherwise hcidump is not able to decode RFCOMM. Or specific > the --psm=3 option on the command line. Here is a new dump with --psm=3: HCI sniffer - Bluetooth packet analyzer ver 1.20 device: hci0 snap_len: 1028 filter: 0xffffffff < ACL data: handle 42 flags 0x02 dlen 9 L2CAP(d): cid 0x0041 len 5 [psm 3] RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a 61 > HCI Event: Number of Completed Packets (0x13) plen 5 01 2A 00 01 00 > ACL data: handle 42 flags 0x02 dlen 9 L2CAP(d): cid 0x0040 len 5 [psm 3] RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1 < ACL data: handle 42 flags 0x02 dlen 9 L2CAP(d): cid 0x0041 len 5 [psm 3] RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a 74 > HCI Event: Number of Completed Packets (0x13) plen 5 01 2A 00 01 00 > ACL data: handle 42 flags 0x02 dlen 9 L2CAP(d): cid 0x0040 len 5 [psm 3] RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1 < ACL data: handle 42 flags 0x02 dlen 9 L2CAP(d): cid 0x0041 len 5 [psm 3] RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a 7A > HCI Event: Number of Completed Packets (0x13) plen 5 01 2A 00 01 00 > ACL data: handle 42 flags 0x02 dlen 9 L2CAP(d): cid 0x0040 len 5 [psm 3] RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1 < ACL data: handle 42 flags 0x02 dlen 9 L2CAP(d): cid 0x0041 len 5 [psm 3] RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 1 fcs 0x9a 0D > HCI Event: Number of Completed Packets (0x13) plen 5 01 2A 00 01 00 > ACL data: handle 42 flags 0x02 dlen 9 L2CAP(d): cid 0x0040 len 5 [psm 3] RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 1 > ACL data: handle 42 flags 0x02 dlen 17 L2CAP(d): cid 0x0040 len 13 [psm 3] RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 9 fcs 0x40 0D 0A 45 52 52 4F 52 0D 0A I don't see any echoed characters at the end, only the "ERROR" message. But ATZ is a very common modem command and as I wrote earlier, it works with windows hyperterminal. I noticed that I enter only "AT", I got an OK. But any other AT commands don't work. I'm sorry but I'm a newbe and don't know how to "grep the initial HCI and L2CAP connection setup". Here is my hcid.conf file: options { autoinit yes; security auto; pairing multi; pin_helper /bin/bluepin; } device { name "Cornflower"; class 0x3e0100; iscan enable; pscan enable; lm master; lp rswitch,hold,sniff,park; } My mobile is a sharp gx15. Here is its "hcitool info" output, maybe it can help: Requesting information ... BD Address: 08:00:1F:51:D1:E9 Device Name: Wildrose LMP Version: 1.1 (0x1) LMP Subversion: 0x460 Manufacturer: Cambridge Silicon Radio (10) Features: 0xef 0xff 0x0b 0x00 0x00 0x00 0x00 0x00 <3-slot packets> <5-slot packets> Please tell me if you need any other info... Attila ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users