Return-Path: Subject: Re: [Bluez-users] problems syncing with bluetooth on multisync: evolution/blueotooth plugin From: Tamer Higazi To: bluez-users@lists.sourceforge.net In-Reply-To: <1116334551.10063.83.camel@pegasus> References: <1116313073.10074.8.camel@linux.site> <4289A32A.1040907@citromail.hu> <1116327973.21185.1.camel@linux.site> <1116329361.10063.44.camel@pegasus> <1116333932.32701.4.camel@linux.site> <1116334551.10063.83.camel@pegasus> Content-Type: text/plain Message-Id: <1116359055.8933.6.camel@linux.site> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 17 May 2005 21:44:15 +0200 Hi! I made what you wrote me: 1. bluepin is on my system not installed, only bluez-pin 2. sdp and hci were started (switched on at yast and listed with the command ps -A) 3. In yast2 the bluetooth section was switched "asking user for password" 4. I run multisync and tried to test a connection on my phone's channel 11 Thank you in advance very much for your help. Here the ouptut: linux:/ # hcidump -X -V HCI sniffer - Bluetooth packet analyzer ver 1.18 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:E0:03:65:64:94 ptype 0xcc18 rswitch 0x01 clkoffset 0x3cef (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 41 bdaddr 00:E0:03:65:64:94 type ACL encrypt 0x00 < ACL data: handle 41 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 3 scid 0x0040 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 handle 41 policy 0x0f Link policy: RSWITCH HOLD SNIFF PARK > HCI Event: Command Complete (0x0e) plen 6 Write Link Policy Settings (0x02|0x000d) ncmd 1 status 0x00 handle 41 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 41 > HCI Event: Max Slots Change (0x1b) plen 3 0000: 29 00 05 ).. > ACL data: handle 41 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0060 scid 0x0040 result 1 status 2 Connection pending - Authorization pending > ACL data: handle 41 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0060 scid 0x0040 result 0 status 0 Connection successful < ACL data: handle 41 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0060 flags 0x00 clen 4 MTU 1024 > ACL data: handle 41 flags 0x02 dlen 12 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0 < ACL data: handle 41 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0060 flags 0x00 result 0 clen 0 Success > HCI Event: Number of Completed Packets (0x13) plen 5 handle 41 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 41 > ACL data: handle 41 flags 0x02 dlen 18 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4 Success MTU 672 < ACL data: handle 41 flags 0x02 dlen 8 L2CAP(d): cid 0x0060 len 4 [psm 3] RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c > HCI Event: Number of Completed Packets (0x13) plen 5 handle 41 > ACL data: handle 41 flags 0x02 dlen 8 L2CAP(d): cid 0x0040 len 4 [psm 3] RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7 < ACL data: handle 41 flags 0x02 dlen 18 L2CAP(d): cid 0x0060 len 14 [psm 3] RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 dlci 22 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size 667 max_retrans 0 credits 7 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 41 > ACL data: handle 41 flags 0x02 dlen 8 L2CAP(d): cid 0x0040 len 4 [psm 3] RFCOMM(s): DM: cr 1 dlci 22 pf 1 ilen 0 fcs 0x92 < ACL data: handle 41 flags 0x02 dlen 8 L2CAP(d): cid 0x0060 len 4 [psm 3] RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd < ACL data: handle 41 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0060 scid 0x0040 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 41 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 41 > ACL data: handle 41 flags 0x02 dlen 8 L2CAP(d): cid 0x0040 len 4 [psm 3] RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7 > ACL data: handle 41 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0060 scid 0x0040 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 41 reason 0x13 Reason: Remote User Teminated Connection > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 41 reason 0x16 Reason: Connection Terminated by Local Host Am Dienstag, den 17.05.2005, 14:55 +0200 schrieb Marcel Holtmann: > Hi Tamer, > > > kbluetoothd is running and up. Why it still doesn't work, is something I > > don't understand. Either I downloaded, compiled and installed bluez-pin. > > Inside the hcid.conf I modified the line: > > send in the output of "hcidump -X -V" as root while you are trying to > sync. And check with YaST that at least hcid and sdpd are started. > > Regards > > Marcel > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by Oracle Space Sweepstakes > Want to be the first software developer in space? > Enter now for the Oracle Space Sweepstakes! > http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users > ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users