Return-Path: Message-ID: <429E368C.6020407@xmission.com> From: Brad Midgley MIME-Version: 1.0 To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] Re: Re: Plantronics M2500 recording problem References: <429E3429.6000108@ex.ac.uk> In-Reply-To: <429E3429.6000108@ex.ac.uk> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 01 Jun 2005 16:28:28 -0600 George, Just a quick note to let you know I looked over it. Everything looks fine. I do not know what is happening. Are you saying the entire recording is bad if it starts out that way? it's not transient like interference? Brad George Norton wrote: > Thanks for the quick reply: > > george@G0on:~$ hciconfig -a > hci0: Type: USB > BD Address: 00:E0:98:D1:B0:5F ACL MTU: 192:8 SCO MTU: 64:8 > UP RUNNING PSCAN ISCAN > RX bytes:101956 acl:25 sco:1980 events:62 errors:0 > TX bytes:72654 acl:23 sco:1403 commands:29 errors:0 > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH HOLD SNIFF PARK > Link mode: SLAVE ACCEPT > Name: 'G0on-0' > Class: 0x000100 > Service Classes: Unspecified > Device Class: Computer, Uncategorized > HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: > 0x20d > Manufacturer: Cambridge Silicon Radio (10) > > george@G0on:~$ hciconfig hci0 revision > hci0: Type: USB > BD Address: 00:E0:98:D1:B0:5F ACL MTU: 192:8 SCO MTU: 64:8 > HCI 16.4 > Chip version: BlueCore02 > Max key size: 56 bit > SCO mapping: HCI > > george@G0on:~$ hcitool info 00:03:89:B6:0D:F8 > Requesting information ... > BD Address: 00:03:89:B6:0D:F8 > Device Name: M2500 by Plantronics > LMP Version: 1.2 (0x2) LMP Subversion: 0x615 > Manufacturer: Cambridge Silicon Radio (10) > Features: 0xbc 0xe8 0x01 0x00 0x08 0x08 0x00 0x00 > > log> > > > > // While recording in audacity, first recording is normal: > george@G0on:~$ hcidump -X > HCIDump - HCI packet analyzer ver 1.12 > device: hci0 snap_len: 1028 filter: 0xffffffff > >> HCI Event: Command Status (0x0f) plen 4 > > 0000: 00 01 07 04 .... > >> HCI Event: Connect Complete (0x03) plen 11 > > 0000: 00 2c 00 f8 0d b6 89 03 00 00 01 .,......... > >> HCI Event: Command Status (0x0f) plen 4 > > 0000: 00 01 06 04 .... > >> HCI Event: Disconn Complete (0x05) plen 4 > > 0000: 00 2c 00 16 .,.. > >> HCI Event: Command Status (0x0f) plen 4 > > 0000: 00 01 07 04 .... > >> HCI Event: Connect Complete (0x03) plen 11 > > 0000: 00 30 00 f8 0d b6 89 03 00 00 01 .0......... > >> HCI Event: Command Status (0x0f) plen 4 > > 0000: 00 01 06 04 .... > >> HCI Event: Disconn Complete (0x05) plen 4 > > 0000: 00 30 00 16 .0.. > > // A second recording which is corrupted: > >> HCI Event: Command Status (0x0f) plen 4 > > 0000: 00 01 07 04 .... > >> HCI Event: Connect Complete (0x03) plen 11 > > 0000: 00 2c 00 f8 0d b6 89 03 00 00 01 .,......... > >> HCI Event: Command Status (0x0f) plen 4 > > 0000: 00 01 06 04 .... > >> HCI Event: Disconn Complete (0x05) plen 4 > > 0000: 00 2c 00 16 .,.. > > // I attempted to record and got a corrupted recording: > george@G0on:~$ btsco -v 00:03:89:B6:0D:F8 > btsco v0.4c > Device is 1:0 > Voice setting: 0x0060 > RFCOMM channel 1 connected > speaker volume: 7 mic volume: 15 > i/o needed: connecting sco... > connected SCO channel > Done setting sco fd > recieved AT+VGS=07 > Sending up speaker change 7 > speaker volume: 7 mic volume: 15 > driver is not in use > disconnected SCO channel > > Kernel Version: 2.6.11.11 > Distribution: Ubuntu 5.04 (Hoary) > > -George > > > > ------------------------------------------------------- > This SF.Net email is sponsored by Yahoo. > Introducing Yahoo! Search Developer Network - Create apps using Yahoo! > Search APIs Find out how you can build Yahoo! directly into your own > Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users ------------------------------------------------------- This SF.Net email is sponsored by Yahoo. Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users