Subject: Re: [Bluez-users] BlueZ in embedded linux
From: Erwin Authried <eauth@softsys.co.at>
To: "bluez-users@lists.sourceforge.net" <bluez-users@lists.sourceforge.net>
In-Reply-To: <20050713161256.27473.qmail@web53210.mail.yahoo.com>
References: <20050713161256.27473.qmail@web53210.mail.yahoo.com>
Content-Type: text/plain
Message-Id: <1121273152.18272.34.camel@justakiss>
Mime-Version: 1.0
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Reply-To: bluez-users@lists.sourceforge.net
Date: Wed, 13 Jul 2005 18:45:52 +0200

Am Mit, den 13.07.2005 schrieb Filipa Duarte um 18:12:
> Hello,
> 
> I am trying to have the bluez-utils-2.14 running on my
> embedded ppc with linux 2.4.20.
> 
> Are the bluez-utils-2.14 and bluez-libs-2.15 ok to run
> with a kernel 2.4.20?
> 
> 
> I was able to cross-compile without much problems and
> have enable the kernel support, however I am not able
> to run the hcid.  When I type hcid -n the result is: 
> hcid[479]: Bluetooth HCI daemon 
> and it does not go on from this point.
> 
> If I run hciconfig hci0 up;  hciconfig -a the result
> is: 
> hci0:   Type: USB
>         BD Address: 00:10:60:AA:B0:CC ACL MTU: 192:8
> SCO MTU: 64:8
>         UP RUNNING PSCAN ISCAN
>         RX bytes:2838 acl:0 sco:0 events:67 errors:0
>         TX bytes:228 acl:0 sco:0 commands:66 errors:0
>         Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00
> 0x00
>         Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2
> HV3
>         Link policy: RSWITCH HOLD SNIFF PARK
>         Link mode: SLAVE ACCEPT
>         Name: 'BlueZ (0)'
>         Class: 0x000000
>         Service Classes: Unspecified
>         Device Class: Miscellaneous,
>         HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1
> (0x1) LMP Subver: 0x33c
>         Manufacturer: Cambridge Silicon Radio (10)
> 
> which seams ok. However I changed the hcid.conf to a
> diferent Name and Class. It seams it is not reading
> from the hcid.conf file but from somewhere else. 
> 
> Any idea of what is happening?
> 
> Regards,
> 
> Filipa Duarte
> 
> 
are you sure that you killed the previously running hcid first? ps
should show exactly one hcid process after running hcid: 
"hcid: processing events".

Erwin


-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP, 
AMD, and NVIDIA.  To register visit http://www.hp.com/go/dualwebinar
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users