Return-Path: Message-ID: From: hariharan veerappan To: bluez-users@lists.sourceforge.net Subject: Re: [Bluez-users] H5 3 wire UART connect problem In-Reply-To: <1120482028.10273.154.camel@pegasus> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 References: <1120157509.15397.152.camel@pegasus> <1120213256.15397.187.camel@pegasus> <1120224082.15397.197.camel@pegasus> <1120482028.10273.154.camel@pegasus> Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Tue, 5 Jul 2005 12:45:07 +0530 Hello All / Marcel, We have changed the hciattach.c and hci_h5.c (H5 3 WIRE UART Bluetooth driv= er). The Bluetooth module is up. We could read the Bluetooth device address and scan the bluetooth network. Thanks marcel for your valuable support. Now we are facing the general problem. we are trying to run SDPD daemon, it fails. we could not able to browse the bluetooth network. This SDPD fail occurs, when we use the USB Dongle also. We have only changed the hci_h5.c and hciattach with new name of the dongle (H5 3 WIRE). Our specification : Kernel - 2.4.20. For information: we run sdpd then we try to kill sdpd, it returns NO PROCESS is KILLED information. Advise us. =20 Thanks and regards Hariharan.V. On 7/4/05, Marcel Holtmann wrote: > Hi Hariharan, >=20 > > Presently we are working in 3 WIRE UART Bluetooth transport protocol > > implementation. > > We are in implementation of 3 WIRE UART in hciattach.c. > > > > Our Specification: > > Linux kernel - 2.4.20. >=20 > this kernel version is a little bit problematic. Do your development > with the 2.6.12 kernel and then backport it. Otherwise nobody will > review it and it may become useless. >=20 > > Module - Solicon wave Serial port Bluetooth Module. >=20 > I can test it out with a Casira and a BlueCore4. >=20 > > In the HCI attach, We are following the procedure of given below. > > > > Host side -> SYNC Command -> BT Device > > Host side <- SYNC Response <- BT Device > > Host Side <- SYNC Command <- BT Device > > Host Side -> SYNC Response -> BT Device > > Host side <- Config Command <- BT Device > > Host side -> Config Response -> BT Device > > > > Here after the device does not respond for any of the commands >=20 > Actually I have no idea why that happens, but I also don't have any > Silicon Wave development kit at hand. >=20 > > Please advise us whether our command sequence for the HCI attach of 3 W= IRE > > bluetooth device. >=20 > Check the specification. I have no idea. >=20 > > Our progress plan in the Implementation of H5 3 WIRE in Bluez. > > First we attach the module HCI layer with the bluez stack. > > Second we build the driver to usr 3 WIRE stack. > > our plan is a proper one or not. Advise. >=20 > You add the basic configuration stuff to hciattach like it was done for > BCSP and then you set the TTY line discipline to N_HCI and switch to the > 3-Wire UART protocol. However this must be implemented in hci_3wire.c > and linked correctly into the hci_uart.ko driver. The complete protocol > handling then has to be done inside the kernel. >=20 > Regards >=20 > Marcel >=20 >=20 >=20 >=20 > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_id=3D7477&alloc_id=3D16492&op=3Dclic= k > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users