To: bluez-users@lists.sourceforge.net
From: sean <seandarcy2@gmail.com>
Message-ID: <deah86$c2k$1@sea.gmane.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Subject: [Bluez-users] What's status of bt headset on linux?
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Reply-To: bluez-users@lists.sourceforge.net
Date: Sun, 21 Aug 2005 14:30:29 -0400

I have a Zonet BT usb adapter:

cat /proc/bus/usb/devices:

........
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12 
MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a5c ProdID=200a Rev= 0.01
S:  Manufacturer=Broadcom
S:  Product=CCBT2035BDGP23-1
S:  SerialNumber=000272C426F1
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 
Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 
Driver=(none)
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
...............


and a Logitech Mobile Pro bt headset.

I'm trying to set this up to use Sype or Free World Dialup 
on FC4.

 From dmesg:

Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
.......
Bluetooth: HCI USB driver ver 2.8
usbcore: registered new driver hci_usb
Bluetooth: Broadcom Blutonium firmware driver ver 1.0
usbcore: registered new driver bcm203x
.............
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.4
Bluetooth: SCO socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
............
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized

Do I need btsco to make this work? It appears btsco will 
only work with csr chips, not broadcom like I have.

But dmesg shows an SCO socket layer. Is this all that's needed?

If so, could someone give me, or direct me, to some explicit 
instructions on how to make this work? googling has not been 
successful.

thanks
sean


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users