Return-Path: Message-ID: <433AD61D.1050307@cyberserver.dk> From: Preben Holm MIME-Version: 1.0 To: bluez-users@lists.sourceforge.net Content-Type: text/plain; charset=ISO-8859-1; format=flowed Subject: [Bluez-users] Problem with bluetooth sound... working but not working Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Wed, 28 Sep 2005 19:42:53 +0200 Hi everyone, I'm new to this list, ny name is Preben and from Denmark... Hardware: Logitech F-0228A headset Trust BT-1300TP bluetooth usb adapter lsusb (the mouse is a logitech, so the chip must be broadcom): ----------------- Bus 001 Device 003: ID 046d:c50a Logitech, Inc. Bus 001 Device 002: ID 0a5c:200a Broadcom Corp. Bus 001 Device 001: ID 0000:0000 ----------------- The problem is, that all seems to work fine, but no sound will play. This is the output from btsco when in verbose mode. -------------- preben@laptop run $ ./connect_headset btsco v0.4c Device is 1:0 Voice setting: 0x0060 RFCOMM channel 1 connected recieved AT+CKPD=200 i/o needed: connecting sco... connected SCO channel Done setting sco fd recieved AT+VGS=13 Sending up speaker change 13 recieved AT+CKPD=200 recieved AT+VGS=13 Sending up speaker change 13 recieved AT+VGS=12 Sending up speaker change 12 recieved AT+VGS=11 Sending up speaker change 11 recieved AT+VGS=12 Sending up speaker change 12 recieved AT+VGS=13 Sending up speaker change 13 preben@laptop run $ -------------- Only "noise" is present in the speaker when trying to play with aplay -B 1000000 -D plughw:Headset ../call_in.wav and it doesn't stop either. Output from hciconfig hci0 revision ------------- laptop preben # hciconfig hci0 revision hci0: Type: USB BD Address: 00:0E:A1:33:94:FE ACL MTU: 377:10 SCO MTU: 16:0 Firmware 263.3 / 9 laptop preben # ------------- Similar configurations (headset+dongle) works on windows-computers, but why isn't there a SCO: HCI/PCM in the hciconfig hci0 revision output. I'm using gentoo and in portage there are firmware for broadcom devices. Should this somehow be stuffed into the device or??? This is the scripts I use for init: ------------ /etc/init.d/bluetooth start hciconfig hci0 voice 0x0060 modprobe snd-bt-sco ------------ and ------------ btsco -v 00:0D:44:2F:4B:25 ------------ I would really like this to work... Thanks Preben ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users