Return-Path: <bluez-users-admin@lists.sourceforge.net>
From: Thomas Arendsen Hein <thomas@intevation.de>
To: bluez-users@lists.sourceforge.net
Message-ID: <20051005152912.GA2686@intevation.de>
References: <20050930124108.GA26157@intevation.de> <1128087233.4955.43.camel@localhost.localdomain>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
In-Reply-To: <1128087233.4955.43.camel@localhost.localdomain>
Subject: [Bluez-users] Re: class 1 bluetooth 1.2 dongles with CSR chipset?
Sender: bluez-users-admin@lists.sourceforge.net
Errors-To: bluez-users-admin@lists.sourceforge.net
Reply-To: bluez-users@lists.sourceforge.net
List-Unsubscribe: <https://lists.sourceforge.net/lists/listinfo/bluez-users>,
	<mailto:bluez-users-request@lists.sourceforge.net?subject=unsubscribe>
List-Id: BlueZ users <bluez-users.lists.sourceforge.net>
List-Post: <mailto:bluez-users@lists.sourceforge.net>
List-Help: <mailto:bluez-users-request@lists.sourceforge.net?subject=help>
List-Subscribe: <https://lists.sourceforge.net/lists/listinfo/bluez-users>,
	<mailto:bluez-users-request@lists.sourceforge.net?subject=subscribe>
List-Archive: <http://sourceforge.net/mailarchive/forum.php?forum=bluez-users>
Date: Wed, 5 Oct 2005 17:29:12 +0200

* Marcel Holtmann <marcel@holtmann.org> [20050930 15:38]:
> try to get a Cellink BlueCore4 based dongle with EDR support.

The two Cellink BTA6030 arrived today, here the output of
hciconfig hci1 features version revision:

hci1:   Type: USB
        BD Address: 00:0A:94:xx:xx:xx ACL MTU: 384:8 SCO MTU: 64:8
        Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
                <3-slot packets> <5-slot packets> <encryption> <slot offset> 
                <timing accuracy> <role switch> <hold mode> <sniff mode> 
                <park state> <RSSI> <channel quality> <SCO link> <HV2 packets> 
                <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> 
                <power control> <transparent SCO> <broadcast encrypt> 
                <EDR ACL 2 Mbps> <EDR ACL 3 Mbps> <enhanced iscan> 
                <interlaced iscan> <interlaced pscan> <inquiry with RSSI> 
                <extended SCO> <EV4 packets> <EV5 packets> <AFH cap. slave> 
                <AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL> 
                <AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps> 
                <EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features> 
        HCI Ver: 1.1 (0x1) HCI Rev: 0x5dc LMP Ver: 1.1 (0x1) LMP Subver: 0x5dc
        Manufacturer: Cambridge Silicon Radio (10)
        Build 1500
        Chip version: BlueCore4-External
        Max key size: 56 bit
        SCO mapping:  HCI

The version numbers look strange.

Unfortunately the dongles only support 56bit encryption.

Thomas

-- 
Email: thomas@intevation.de
http://intevation.de/~thomas/


-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users