Return-Path: Message-ID: <43E41B2A.90605@blueyonder.co.uk> From: Sid Boyce MIME-Version: 1.0 To: bluez-users@lists.sourceforge.net Content-Type: text/plain; charset=ISO-8859-1; format=flowed Subject: [Bluez-users] Still silent Nokia HDW-3 headset Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sat, 04 Feb 2006 03:10:34 +0000 Kmix does not see the mixer controls, qamix sees the card but controls are empty, gnome-volume-control sees both alsa and oss mixers, but setting them full on doesn't make a difference ... they are not muted. No sound either on record or playback. I'm quite mystified. All the data I can think of set out below. I need to hunt down the "pskey command", haven't found it in CVS or anywhere else. Regards Sid. snd_bt_sco 15756 1 snd_pcm 86408 6 snd_emu10k1,snd_bt_sco,snd_pcm_oss,snd_intel8x0,snd_ac97_codec,snd_usb_audio snd_page_alloc 10376 4 snd_emu10k1,snd_bt_sco,snd_intel8x0,snd_pcm snd_hwdep 9604 3 snd_emu10k1,snd_bt_sco,snd_usb_audio snd 52612 15 snd_emu10k1,snd_bt_sco,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_mpu401,snd_intel8x0,snd_mpu401_uart,snd_ac97_codec,snd_usb_audio,snd_pcm,snd_timer,snd_rawmidi,snd_seq_device,snd_hwdep # hciconfig -a hci0: Type: USB BD Address: 00:0A:3A:63:CF:47 ACL MTU: 377:10 SCO MTU: 16:0 UP RUNNING PSCAN ISCAN RX bytes:3240 acl:91 sco:0 events:176 errors:0 TX bytes:2873 acl:115 sco:0 commands:49 errors:0 Features: 0xff 0xfe 0x0d 0x38 0x08 0x08 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'BlueZ (0)' Class: 0x7e010c Service Classes: Networking, Rendering, Capturing Device Class: Computer, Laptop HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x309 Manufacturer: Broadcom Corporation (15) # hciconfig hci0 revision hci0: Type: USB BD Address: 00:0A:3A:63:CF:47 ACL MTU: 377:10 SCO MTU: 16:0 Firmware 0.3 / 9 /var/log/messages Feb 2 10:00:36 barrabas hcid[8432]: link_key_request (sba=00:0A:3A:63:CF:47, dba=00:03:89:60:F9:CF) Feb 2 10:00:37 barrabas hcid[8432]: pin_code_request (sba=00:0A:3A:63:CF:47, dba=00:03:89:60:F9:CF) Feb 2 10:00:37 barrabas hcid[8432]: link_key_notify (sba=00:0A:3A:63:CF:47, dba=00:03:89:60:F9:CF) Headset plugged in, the above is reported. The PIN (0000) done when first connected some time ago, so it doesn't prompt for it. barrabas:/ftp/Feb06/burn # btsco -v 00:03:89:60:F9:CF btsco v0.41 Device is 2:0 Voice setting: 0x0060 RFCOMM channel 1 connected # aplay -D plughw:Headset /XXX.wav Playing WAVE '/XXX.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono Aborted by signal Interrupt... (CTRL-C done) # hcidump -x HCIDump - HCI packet analyzer ver 1.9 device: hci0 snap_len: 1028 filter: 0xffffffff < ACL data: handle 0x0006 flags 0x02 dlen 18 L2CAP(d): cid 0x44 len 14 [psm 0] 0B EF 15 41 54 2B 56 47 53 3D 31 35 0D 9A < ACL data: handle 0x0006 flags 0x02 dlen 18 L2CAP(d): cid 0x44 len 14 [psm 0] 0B EF 15 41 54 2B 56 47 4D 3D 31 35 0D 9A < HCI Command: Add SCO Connection (0x01|0x0007) plen 4 06 00 E0 00 > HCI Event: Command Status (0x0f) plen 4 00 01 07 04 > HCI Event: Number of Completed Packets (0x13) plen 5 01 06 00 02 00 > HCI Event: Connect Complete (0x03) plen 11 00 01 00 CF F9 60 89 03 00 00 01 > ACL data: handle 0x0006 flags 0x02 dlen 17 > ACL data: handle 0x0006 flags 0x01 dlen 2 L2CAP(d): cid 0x41 len 15 [psm 0] 09 FF 15 02 41 54 2B 56 47 53 3D 30 37 0D 5C < ACL data: handle 0x0006 flags 0x02 dlen 14 L2CAP(d): cid 0x44 len 10 [psm 0] 0B EF 0D 0D 0A 4F 4B 0D 0A 9A > HCI Event: Number of Completed Packets (0x13) plen 5 01 06 00 01 00 < ACL data: handle 0x0006 flags 0x02 dlen 17 L2CAP(d): cid 0x44 len 13 [psm 0] 0B EF 13 41 54 2B 56 47 53 3D 37 0D 9A < HCI Command: Disconnect (0x01|0x0006) plen 3 01 00 13 > HCI Event: Command Status (0x0f) plen 4 00 01 06 04 > HCI Event: Number of Completed Packets (0x13) plen 5 01 06 00 01 00 > HCI Event: Disconn Complete (0x05) plen 4 00 01 00 16 barrabas:/home/lancelot # cat /proc/asound/cards 0 [nForce2 ]: NFORCE - NVidia nForce2 NVidia nForce2 with ALC650F at 0xe7080000, irq 9 1 [UART ]: MPU-401 UART - MPU-401 UART MPU-401 UART at 0x330, irq 10 2 [Headset ]: Bluetooth SCO - BT Headset BT Headset 1 barrabas:/home/lancelot # cat /proc/asound/card2/oss_mixer VOLUME "Master" 0 BASS "" 0 TREBLE "" 0 SYNTH "" 0 PCM "" 0 SPEAKER "" 0 LINE "" 0 MIC "Mic" 0 CD "" 0 IMIX "" 0 ALTPCM "" 0 RECLEV "" 0 IGAIN "" 0 OGAIN "" 0 LINE1 "" 0 LINE2 "" 0 LINE3 "" 0 DIGITAL1 "" 0 DIGITAL2 "" 0 DIGITAL3 "" 0 PHONEIN "" 0 PHONEOUT "" 0 VIDEO "" 0 RADIO "" 0 MONITOR "" 0 barrabas:/home/lancelot # cat /proc/asound/card2/id Headset barrabas:/home/lancelot # cat /proc/asound/card2/pcm0c/info card: 2 device: 0 subdevice: 0 stream: CAPTURE id: Bluetooth SCO PCM name: BT SCO PCM subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 1 barrabas:/home/lancelot # cat /proc/asound/card2/pcm0c/oss barrabas:/home/lancelot # cat /proc/asound/card2/pcm0p/ info oss sub0/ barrabas:/home/lancelot # cat /proc/asound/oss/devices 0: [0- 0]: mixer 3: [0- 0]: digital audio 4: [0- 0]: digital audio 12: [0- 1]: digital audio 16: [1- 0]: mixer 19: [1- 0]: digital audio 20: [1- 0]: digital audio barrabas:/home/lancelot # cat /proc/asound/oss/sndstat Sound Driver:3.8.1a-980706 (ALSA v1.0.11rc2 emulation code) Kernel: Linux barrabas 2.6.16-rc1-git4a #2 PREEMPT Wed Feb 1 06:31:29 GMT 2006 i686 Config options: 0 Installed drivers: Type 10: ALSA emulation Card config: NVidia nForce2 with ALC650F at 0xe7080000, irq 9 BT Headset 1 Audio devices: 0: NVidia nForce2 (DUPLEX) 1: BT SCO PCM (DUPLEX) <============= "pskey mapsco 0" needed here???? Synth devices: NOT ENABLED IN CONFIG Midi devices: NOT ENABLED IN CONFIG Timers: 31: system timer Mixers: 0: Realtek ALC650F 1: BT Headset Mixer barrabas:/home/lancelot # cat /proc/asound/card2/pcm0p/info card: 2 device: 0 subdevice: 0 stream: PLAYBACK id: Bluetooth SCO PCM name: BT SCO PCM subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 1 -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Retired IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users