Return-Path: From: "Bearcat M. Sandor" Reply-To: Linux@feline-soul.com To: Marcel Holtmann Subject: Re: [Bluez-users] How do I reset a pairing? Date: Thu, 31 Aug 2006 18:29:31 -0600 Cc: bluez-users@lists.sourceforge.net References: <200608311150.38005.Linux@feline-soul.com> <1157062113.4026.145.camel@aeonflux.holtmann.net> In-Reply-To: <1157062113.4026.145.camel@aeonflux.holtmann.net> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Message-Id: <200608311829.31921.Linux@feline-soul.com> List-ID: I killed kdebluetooth and made sure no traces of it were running. I get the same errors. Here is the hcidump -X -V with kdebluetooth off: 18:23:48 root@linux:/home/bearcat# hcidump -X -V HCI sniffer - Bluetooth packet analyzer ver 1.31 device: hci0 snap_len: 1028 filter: 0xffffffffffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x04 handle 0 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00 Error: Page Timeout < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 > HCI Event: Command Complete (0x0e) plen 6 Read Voice Setting (0x03|0x0025) ncmd 1 status 0x00 voice setting 0x0060 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x04 handle 0 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00 Error: Page Timeout At the command line 18:21:36 bearcat@linux:~$ btsco 00:0D:44:4F:37:72 Error: Failed to connect to SDP server: Function not implemented Assuming channel 2 Can't connect RFCOMM channel: Resource temporarily unavailable 18:23:07 bearcat@linux:~$ btsco 00:0D:44:4F:37:72 Error: Failed to connect to SDP server: Host is down Assuming channel 2 Can't connect RFCOMM channel: Host is down Thanks, Bearcat On Thursday 31 August 2006 16:08 in an email titled "Re: [Bluez-users] How do I reset a pairing?" Marcel Holtmann wrote: >Hi Bearcat, > >> Thank you. Here is the output from hcidump -X -V: >> >> 11:46:21 root@linux:/home/bearcat# hcidump -X -V >> HCI sniffer - Bluetooth packet analyzer ver 1.31 >> device: hci0 snap_len: 1028 filter: 0xffffffffffffffff >> < HCI Command: Create Connection (0x01|0x0005) plen 13 >> bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 >> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 >> >> > HCI Event: Command Status (0x0f) plen 4 >> >> Create Connection (0x01|0x0005) status 0x00 ncmd 1 >> >> > HCI Event: PIN Code Request (0x16) plen 6 >> >> bdaddr 00:0D:44:4F:37:72 >> >> > HCI Event: Mode Change (0x14) plen 6 >> >> status 0x00 handle 41 mode 0x00 interval 0 >> Mode: Active >> >> > HCI Event: Mode Change (0x14) plen 6 >> >> status 0x00 handle 41 mode 0x02 interval 126 >> Mode: Sniff >> >> > HCI Event: Connect Complete (0x03) plen 11 >> >> status 0x22 handle 44 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00 >> Error: LMP Response Timeout >> < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 >> >> > HCI Event: Command Complete (0x0e) plen 6 >> >> Read Voice Setting (0x03|0x0025) ncmd 1 >> status 0x00 voice setting 0x0060 >> < HCI Command: Create Connection (0x01|0x0005) plen 13 >> bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 >> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 >> >> > HCI Event: Command Status (0x0f) plen 4 >> >> Create Connection (0x01|0x0005) status 0x00 ncmd 1 >> >> > HCI Event: PIN Code Request (0x16) plen 6 >> >> bdaddr 00:0D:44:4F:37:72 >> < HCI Command: Inquiry (0x01|0x0001) plen 5 >> lap 0x9e8b33 len 6 num 0 >> >> > HCI Event: Command Status (0x0f) plen 4 >> >> Inquiry (0x01|0x0001) status 0x00 ncmd 1 >> >> > HCI Event: Inquiry Result (0x02) plen 15 >> >> bdaddr 00:0D:44:4F:37:72 mode 1 clkoffset 0x50a7 class 0x200404 >> >> > HCI Event: Inquiry Complete (0x01) plen 1 >> >> status 0x00 >> >> > HCI Event: Connect Complete (0x03) plen 11 >> >> status 0x22 handle 45 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00 >> Error: LMP Response Timeout > >this looks like you have the KDE Bluetooth thingy running and it >interferes when trying to connect. They always did this scanning thing >without actually checking if the HCI controller is in use. I would >advise you to not use KDE Bluetooth unless they switched to using the >new D-Bus driven API. > >Regards > >Marcel -- Bearcat M. Sandor Bearcat@feline-soul.com Jabber: bearcat@jabber.feline-soul.net ICQ: 6628727 MSN: bearcatsandor@hotmail.com Yahoo: bearcatsandor AIM: bearcatmsandor