Return-Path: Message-ID: <44F34B52.3090609@prodigy7.de> Date: Mon, 28 Aug 2006 22:00:18 +0200 From: Manuel Bernhardt MIME-Version: 1.0 To: BlueZ users References: <44F1A585.8050408@prodigy7.de> In-Reply-To: <44F1A585.8050408@prodigy7.de> Subject: Re: [Bluez-users] Can't use capi/cmtp with bfusb Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net Hi, really no one where have an idea? If other information are needed, say it and you get it. It would be very nice if i would get bfusb working with cmtp on my nas because i could use my nas as an voice box for ex. I hope, i'dnt overrun the mailinglist with the detailed description in my first mail. Manuel Bernhardt Manuel Bernhardt schrieb: > Hi, > > i try to get my BlueFritz! USB-Stick get working on my Kurobox (An NAS > based on an PPC-CPU) but i've the problem, that i can't use the capi > device after loading all modules (See messages at the end of this mail). > > Here some infos what I do: > > 1. I plug the stick on the Kurobox and the kernel does recognize the stick: > > usb 2-1: new full speed USB device using ohci_hcd and address 2 > usb 2-1: configuration #1 chosen from 1 choice > Bluetooth: Core ver 2.10 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: HCI USB driver ver 2.9 > usbcore: registered new driver hci_usb > > Loaded modules are now: > > hci_usb 19260 0 > bluetooth 66476 1 hci_usb > > 2. Next I load the bfusb driver with _modprobe bfusb_ > > Syslog output: > Bluetooth: BlueFRITZ! USB driver ver 1.1 > usbcore: registered new driver bfusb > > Modules loaded now: > > bfusb 14244 0 > firmware_class 12224 1 bfusb > hci_usb 19260 0 > bluetooth 66476 2 bfusb,hci_usb > > 3. Now i execute /etc/init.d/bluez-utils start > > Output: > Starting bluez-utils: hcid sdpd rfcomm. > > Syslog output: > Bluetooth: L2CAP ver 2.8 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > > Loaded modules: > rfcomm 48572 0 > l2cap 27140 5 rfcomm > bfusb 14244 0 > firmware_class 12224 1 bfusb > hci_usb 19260 2 > bluetooth 66476 8 rfcomm,l2cap,bfusb,hci_usb > > 4. When i enter hciconfig, i see the bluez interface - it's up: > > hci0: Type: USB > BD Address: 00:04:0E:89:DA:BA ACL MTU: 120:20 SCO MTU: 0:0 > UP RUNNING PSCAN ISCAN > RX bytes:101 acl:0 sco:0 events:13 errors:0 > TX bytes:300 acl:0 sco:0 commands:13 errors:0 > > Additionally i execute hciconfig hci0 lp because holtmann writes in his > how-to (http://www.holtmann.org/linux/bluetooth/isdn.html), that this > could be necessary: > > hci0: Type: USB > BD Address: 00:04:0E:89:DA:BA ACL MTU: 120:20 SCO MTU: 0:0 > Link policy: RSWITCH HOLD SNIFF PARK > > 5. I execute now _modprobe cmtp_ > > Syslog output: > CAPI Subsystem Rev 1.1.2.8 > Bluetooth: CMTP (CAPI Emulation) ver 1.0 > > Loaded modules: > cmtp 24320 0 > kernelcapi 50548 1 cmtp > rfcomm 48572 0 > l2cap 27140 6 cmtp,rfcomm > bfusb 14244 0 > firmware_class 12224 1 bfusb > hci_usb 19260 2 > bluetooth 66476 9 cmtp,rfcomm,l2cap,bfusb,hci_usb > > 7. Next I do an _modprobe capi_ because. > > Syslog output: > capifs: Rev 1.1.2.3 > capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) > > Modules: > Module Size Used by > capi 21928 0 > capifs 6888 2 capi > cmtp 24320 0 > kernelcapi 50548 2 capi,cmtp > rfcomm 48572 0 > l2cap 27140 6 cmtp,rfcomm > bfusb 14244 0 > firmware_class 12224 1 bfusb > hci_usb 19260 2 > bluetooth 66476 9 cmtp,rfcomm,l2cap,bfusb,hci_usb > > 8. Yet I do an ciptool search: > > Searching ... > Checking service for 00:04:0E:85:C2:21 > Connecting to device 00:04:0E:85:C2:21 > > Syslog output: > Bluetooth: Found 1 CAPI controller(s) on device 00:04:0E:85:C2:21 > kcapi: Controller 1: 00:04:0E:85:C2:21 attached > kcapi: card 1 "00:04:0E:85:C2:21" ready. > > Now .... when i enter now an capiinfo, i should get an full info about > available capi features, right? > > I get this here: > > Number of Controllers : 1 > Controller 1: > Manufacturer: AVM Berlin > CAPI Version: 2.0 > Manufacturer Version: 3.101-04 (49.20) > Serial Number: 0000000 > BChannels: 512 > Global Options: 0x31000000 > B1 protocols support: 0x0f0000c0 > 56 kbit/s bit-transparent operation > Modem with all negotiations > B2 protocols support: 0x0b0b0000 > B3 protocols support: 0x0f000080 > Modem > > 0100 > 0200 > 31000000 > 0f0000c0 > 0b0b0000 > 0f000080 > 00000000 00000000 00000000 00000000 00000000 00000000 > 01000001 00020000 00000000 00000000 00000000 > FAC REQ - Illegal command or subcommand or message length less than 12 > bytes (0x1102) > > Other capi applications doesn't also work so i think, the connection > isn't established right. What I do wrong? > > Here some further details: > Linux lansrv01 2.6.17.8-mh5_kurobox_hg #2 Sat Aug 19 01:49:26 CEST 2006 > ppc GNU/Linux > - Kernel includes patch from http://www.bluez.org/patches.html > > I hope i give enough details so someone can help me, solving this problem. > > Kind regards > Manuel Bernhardt > > > > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > Bluez-users mailing list > Bluez-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bluez-users > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users