Return-Path: Message-ID: <456487C5.3070502@gmail.com> Date: Wed, 22 Nov 2006 17:24:21 +0000 MIME-Version: 1.0 To: BlueZ users From: Simon Williams Subject: [Bluez-users] Can't init device hci0: Connection timed out (110) Reply-To: systemparadox@gmail.com, BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net Hello again. I've finally managed to get the device (my 3Com 3CRWB6096 Version 2.0 PCMCIA Card) to show up in hciconfig (I had the wrong firmware). Dbus is running, all the bluetooth services are running. But I get the following... # hciconfig hci0: Type: PCCARD BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN INIT RUNNING RX bytes:0 acl:0 sco:0 events:0 errors:0 TX bytes:4 acl:0 sco:0 commands:1 errors:0 # hciconfig hci0 up Can't init device hci0: Connection timed out (110) # hciconfig hci0: Type: PCCARD BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RX bytes:0 acl:0 sco:0 events:0 errors:0 TX bytes:4 acl:0 sco:0 commands:2 errors:0 Is there some way I can manually probe the card for it's address to find out if it's bluez or the driver? Shouldn't it have an address even when it's down? Please, any other suggestions very much appreciated. Thanks in advance Simon ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users