Return-Path: Message-ID: <477AC130.500@boerkel.de> Date: Tue, 01 Jan 2008 23:39:44 +0100 From: =?ISO-8859-1?Q?Thomas_B=F6rkel?= MIME-Version: 1.0 To: BlueZ users References: <477AA678.4000707@boerkel.de> <477AA8D9.9080804@boerkel.de> In-Reply-To: <477AA8D9.9080804@boerkel.de> Subject: Re: [Bluez-users] Trouble with Tecom BT3030 - not recognized Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net HI! I think, I am a small step further. I guess, the working Anycom USB-250 device has a firmware onboard, where as the Tecom BT3030 needs the firmware to be loaded when plugging it in and this is what not works. I have firmware loading support in the kernel (standard Gentoo 2.6.23 kernel) active and it works for an ivtv video capture card. So I tried manually uploading the firmware to the dongle like this: /etc/init.d/bluetooth stop bluefw usb 004/003;/etc/init.d/bluetooth start This worked one time and hciconfig showed the device (so it is not wrecked). But now this gives me: bluefw[13626]: Loading firmware to usb device 0a5c:2033 bluefw[13626]: Can't claim interface 0. Device or resource busy (16) Anyway, normally hotplug should load the firmware into the device. I did not have the hotplug package installed but now I have and it makes no difference. Any ideas? Thanks! Thomas ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users