Return-Path: Date: Mon, 7 Apr 2008 22:00:35 +0300 (EEST) From: Ari Moisio To: BlueZ users In-Reply-To: Message-ID: References: <200804070956.23449.aklists@mixdown.ca> MIME-Version: 1.0 Subject: Re: [Bluez-users] Emulating a gps receiver Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net Hello Thanks. Fixed class definition and added SP to service. Rfcomm appears to be little old in Debian (3.7), it did not recognize the watch command and i had to split the given command for two separate commands but this is not a problem. Sending a nmea log one line in second with simple script worked perfectly:-) -- mr. M01510 On Mon, 7 Apr 2008, Brad Midgley wrote: > Guys > > If you set up gpsd, you can do this in a straightforward way, assuming > rfcomm0 is available: > > sdptool add SP > rfcomm -r watch 0 1 sh -c "gpspipe -r >/dev/rfcomm0" & > > the first command advertises a serial port on channel 1, the second > sets up a listener that will repeat the nmea stream over channel 1 > whenever someone connects on it. > > there may be ways to make gpsd put out a pre-recorded stream, or you > could write your own app that runs in place of gpspipe and slowly > sends out your nmea log in eg 1-second intervals. > > Andrew's device class suggestion may be required for some devices, but > I didn't need it for a pocketpc or my n800. > > Brad > > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Register now and save $200. Hurry, offer ends at 11:59 p.m., Monday, April 7! Use priority code J8TLD2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users