Return-Path: Message-ID: <013201c8cb5c$d507ff40$0132a8c0@Raymondpc> From: "colorant" To: "BlueZ users" References: <793776.37171.qm@web57914.mail.re3.yahoo.com><484EFFCF.90708@earthlink.net> <3e9cdced0806101527n7d1489fbme492c29ddf394e0b@mail.gmail.com> Date: Wed, 11 Jun 2008 08:48:14 +0800 MIME-Version: 1.0 Subject: [Bluez-users] How to use Bluez with CSR chip ? Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net Hi I am not sure is this the proper place to put up this question, if not , please correct me. I was trying to run bluez on our board with bc4 chip. This chip need to set pskey before it can run I use hciattach and hciconfig to bring up the hci0 interface. Then I try hcitool hci0 scan with my earphone open. Nothing happend. while, if I using CSR's bchs a2dp demo , it's ok, I can play music. say hardware is ok. My question is : 1. To enable bluez with csr chip, is there anything need to do vs the standard kernel and bluez package ? Some config need? 2. Did I need to place the bootrap init sequence for the bc4 chip in some place if I using bluez ? say in kernel or in the bluez user space scripts? Or , the standard kernel and bluez utility already hand it, But I just do the wrong way ? Many thanks. Raymond ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users