Return-Path: Message-ID: From: "shy" To: "'BlueZ users'" References: <005501c8e76e$bfbd1d40$3f3757c0$@savary@kerlink.fr> Date: Thu, 17 Jul 2008 10:37:14 +0800 MIME-Version: 1.0 In-Reply-To: <005501c8e76e$bfbd1d40$3f3757c0$@savary@kerlink.fr> Subject: Re: [Bluez-users] connection failed with bluez 3.30 Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: multipart/mixed; boundary="===============2113856969==" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net --===============2113856969== Content-Type: multipart/alternative; boundary="----=_NextPart_000_0058_01C8E7F9.13FD4EE0" ------=_NextPart_000_0058_01C8E7F9.13FD4EE0 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: quoted-printable Hi,Pierre >>From the log, your device can be connected, but something wrong with = sdp. For sdp requested some attributes, but the response always was null: > ACL data: handle 42 flags 0x02 dlen 17 L2CAP(d): cid 0x0040 len 13 [psm 1] SDP SS Req: tid 0x1 len 0x8 pat uuid-16 0x110b (AudioSink) max 65535 cont 00 < ACL data: handle 42 flags 0x02 dlen 14 L2CAP(d): cid 0x0040 len 10 [psm 1] SDP SS Rsp: tid 0x1 len 0x5 count 0 cont 00 I think you could check your services, whether you started them up or = not. Brs Shi Buyun _____ =20 From: bluez-users-bounces@lists.sourceforge.net [mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of Pierre Savary Sent: 2008=C4=EA7=D4=C217=C8=D5 02:07 To: bluez-users@lists.sourceforge.net; BlueZ-Dev Subject: [Bluez-users] connection failed with bluez 3.30 Hi all, I updated my design (ARM9 + linux-2.6.23) with the bluez (libs and = utils) 3. 30-3. I also uptaded all the necessary libraries, dbus, etc=A1=AD Since = this update my nokia 6120, N95 and E60 cannot be connected=A1=AD and it = worked before (bluez 3.16). Some others phone work fine (all SonyEricsson, Nokia = 6234). Here the hcidump : =20 [root@kap /root]$hcidump HCI sniffer - Bluetooth packet analyzer ver 1.42 device: hci0 snap_len: 1028 filter: 0xffffffff > HCI Event: Connect Request (0x04) plen 10 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Max Slots Change (0x1b) plen 3 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 < ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Info rsp: type 2 result 1 Not supported > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Connection Packet Type Changed (0x1d) plen 5 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Remote Name Req Complete (0x07) plen 255 > ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4 MTU 65535 < ACL data: handle 42 flags 0x02 dlen 18 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4 MTU 65535 < ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0 > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 18 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4 MTU 672 > ACL data: handle 42 flags 0x02 dlen 17 L2CAP(d): cid 0x0040 len 13 [psm 1] SDP SS Req: tid 0x1 len 0x8 pat uuid-16 0x110b (AudioSink) max 65535 cont 00 < ACL data: handle 42 flags 0x02 dlen 14 L2CAP(d): cid 0x0040 len 10 [psm 1] SDP SS Rsp: tid 0x1 len 0x5 count 0 cont 00 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 17 L2CAP(d): cid 0x0040 len 13 [psm 1] SDP SS Req: tid 0x2 len 0x8 pat uuid-16 0x111e (Handsfree) max 65535 cont 00 < ACL data: handle 42 flags 0x02 dlen 14 L2CAP(d): cid 0x0040 len 10 [psm 1] SDP SS Rsp: tid 0x2 len 0x5 count 0 cont 00 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 17 L2CAP(d): cid 0x0040 len 13 [psm 1] SDP SS Req: tid 0x3 len 0x8 pat uuid-16 0x1108 (Headset) max 65535 cont 00 < ACL data: handle 42 flags 0x02 dlen 14 L2CAP(d): cid 0x0040 len 10 [psm 1] SDP SS Rsp: tid 0x3 len 0x5 count 0 cont 00 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 17 L2CAP(d): cid 0x0040 len 13 [psm 1] SDP SS Req: tid 0x4 len 0x8 pat uuid-16 0x110c (AVRemTarget) max 65535 cont 00 < ACL data: handle 42 flags 0x02 dlen 14 L2CAP(d): cid 0x0040 len 10 [psm 1] SDP SS Rsp: tid 0x4 len 0x5 count 0 cont 00 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 31 L2CAP(d): cid 0x0040 len 27 [psm 1] SDP SS Req: tid 0x5 len 0x16 pat uuid-128 00005555-0000-1000-8000-0002ee000001 max 65535 cont 00 < ACL data: handle 42 flags 0x02 dlen 14 L2CAP(d): cid 0x0040 len 10 [psm 1] SDP SS Rsp: tid 0x5 len 0x5 count 0 cont 00 > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040 < ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 > HCI Event: Number of Completed Packets (0x13) plen 5 < HCI Command: Disconnect (0x01|0x0006) plen 3 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Disconn Complete (0x05) plen 4 =20 Thanks in advance for your help. Best Regards =20 Pierre ------=_NextPart_000_0058_01C8E7F9.13FD4EE0 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable
Hi,Pierre
From the log, your device = can be=20 connected, but something wrong with sdp. For sdp requested some = attributes, but=20 the response always was null:

> = ACL data:=20 handle 42 flags 0x02 dlen 17

   =20 L2CAP(d): cid 0x0040 len 13 [psm 1]

        SDP = SS Req:=20 tid 0x1 len 0x8

         =20 pat uuid-16 0x110b (AudioSink)

         =20 max 65535

         =20 cont 00

< = ACL data:=20 handle 42 flags 0x02 dlen 14

   =20 L2CAP(d): cid 0x0040 len 10 [psm 1]

        SDP = SS Rsp:=20 tid 0x1 len 0x5

         =20 count 0

         =20 cont 00

I think you could check your services, = whether you=20 started them up or not.

Brs

Shi=20 Buyun


From: = bluez-users-bounces@lists.sourceforge.net=20 [mailto:bluez-users-bounces@lists.sourceforge.net] On Behalf Of = Pierre=20 Savary
Sent: 2008=C4=EA7=D4=C217=C8=D5 02:07
To:=20 bluez-users@lists.sourceforge.net; BlueZ-Dev
Subject: = [Bluez-users]=20 connection failed with bluez 3.30

Hi all,

I updated my design (ARM9 + = linux-2.6.23)=20 with the bluez (libs and utils) 3.30-3. I also uptaded all the necessary = libraries, dbus, etc=A1=AD Since this update my nokia 6120, N95 and E60 = cannot be=20 connected=A1=AD and it worked before (bluez 3.16). Some others phone = work fine (all=20 SonyEricsson, Nokia 6234).

Here the hcidump = :

 

[root@kap=20 /root]$hcidump

HCI = sniffer -=20 Bluetooth packet analyzer ver 1.42

device: hci0=20 snap_len: 1028 filter: 0xffffffff

> HCI Event:=20 Connect Request (0x04) plen 10

< HCI Command:=20 Accept Connection Request (0x01|0x0009) plen 7

> HCI Event:=20 Command Status (0x0f) plen 4

> HCI Event:=20 Connect Complete (0x03) plen 11

< HCI Command:=20 Read Remote Supported Features (0x01|0x001b) plen = 2

> HCI Event: = Page Scan=20 Repetition Mode Change (0x20) plen 7

> HCI Event:=20 Max Slots Change (0x1b) plen 3

> HCI Event:=20 Command Status (0x0f) plen 4

> HCI Event:=20 Command Status (0x0f) plen 4

< HCI Command:=20 Write Link Policy Settings (0x02|0x000d) plen = 4

> HCI Event:=20 Command Complete (0x0e) plen 6

< HCI Command:=20 Change Connection Packet Type (0x01|0x000f) plen = 4

> HCI Event:=20 Read Remote Supported Features (0x0b) plen 11

> ACL data:=20 handle 42 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm = 1 scid=20 0x0040

< ACL data:=20 handle 42 flags 0x02 dlen 16

    L2CAP(s): Connect rsp: dcid = 0x0040=20 scid 0x0040 result 0 status 0

      Connection=20 successful

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

> ACL data:=20 handle 42 flags 0x02 dlen 10

    L2CAP(s): Info req: type=20 2

< ACL data:=20 handle 42 flags 0x02 dlen 12

    L2CAP(s): Info rsp: type 2 = result=20 1

      Not=20 supported

> HCI Event:=20 Command Status (0x0f) plen 4

< HCI Command:=20 Remote Name Request (0x01|0x0019) plen 10

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

> HCI Event:=20 Connection Packet Type Changed (0x1d) plen 5

> HCI Event:=20 Command Status (0x0f) plen 4

> HCI Event:=20 Remote Name Req Complete (0x07) plen 255

> ACL data:=20 handle 42 flags 0x02 dlen 16

    L2CAP(s): Config req: dcid = 0x0040=20 flags 0x00 clen 4

      MTU=20 65535

< ACL data:=20 handle 42 flags 0x02 dlen 18

    L2CAP(s): Config rsp: scid = 0x0040=20 flags 0x00 result 0 clen 4

      MTU=20 65535

< ACL data:=20 handle 42 flags 0x02 dlen 12

    L2CAP(s): Config req: dcid = 0x0040=20 flags 0x00 clen 0

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

> ACL data:=20 handle 42 flags 0x02 dlen 18

    L2CAP(s): Config rsp: scid = 0x0040=20 flags 0x00 result 0 clen 4

      MTU=20 672

> ACL data:=20 handle 42 flags 0x02 dlen 17

    L2CAP(d): cid 0x0040 len 13 = [psm=20 1]

        SDP = SS Req:=20 tid 0x1 len 0x8

         =20 pat uuid-16 0x110b (AudioSink)

         =20 max 65535

         =20 cont 00

< ACL data:=20 handle 42 flags 0x02 dlen 14

    L2CAP(d): cid 0x0040 len 10 = [psm=20 1]

        SDP = SS Rsp:=20 tid 0x1 len 0x5

         =20 count 0

         =20 cont 00

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

> ACL data:=20 handle 42 flags 0x02 dlen 17

    L2CAP(d): cid 0x0040 len 13 = [psm=20 1]

        SDP = SS Req:=20 tid 0x2 len 0x8

         =20 pat uuid-16 0x111e (Handsfree)

         =20 max 65535

         =20 cont 00

< ACL data:=20 handle 42 flags 0x02 dlen 14

    L2CAP(d): cid 0x0040 len 10 = [psm=20 1]

        SDP = SS Rsp:=20 tid 0x2 len 0x5

         =20 count 0

     =20     cont 00

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

> ACL data:=20 handle 42 flags 0x02 dlen 17

    L2CAP(d): cid 0x0040 len 13 = [psm=20 1]

        SDP = SS Req:=20 tid 0x3 len 0x8

         =20 pat uuid-16 0x1108 (Headset)

         =20 max 65535

         =20 cont 00

< ACL data:=20 handle 42 flags 0x02 dlen 14

    L2CAP(d): cid 0x0040 len 10 = [psm=20 1]

        SDP = SS Rsp:=20 tid 0x3 len 0x5

         =20 count 0

         =20 cont 00

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

> ACL data:=20 handle 42 flags 0x02 dlen 17

 =20   L2CAP(d): cid 0x0040 len 13 [psm = 1]

        SDP = SS Req:=20 tid 0x4 len 0x8

         =20 pat uuid-16 0x110c (AVRemTarget)

         =20 max 65535

         =20 cont 00

< ACL data:=20 handle 42 flags 0x02 dlen 14

    L2CAP(d): cid 0x0040 len 10 = [psm=20 1]

        SDP = SS Rsp:=20 tid 0x4 len 0x5

         =20 count 0

         =20 cont 00

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

> ACL data:=20 handle 42 flags 0x02 dlen 31

    L2CAP(d): cid 0x0040 len 27 = [psm=20 1]

        SDP = SS Req:=20 tid 0x5 len 0x16

         =20 pat uuid-128 = 00005555-0000-1000-8000-0002ee000001

         =20 max 65535

         =20 cont 00

< ACL data:=20 handle 42 flags 0x02 dlen 14

    L2CAP(d): cid 0x0040 len 10 = [psm=20 1]

        SDP = SS Rsp:=20 tid 0x5 len 0x5

         =20 count 0

         =20 cont 00

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

> ACL data:=20 handle 42 flags 0x02 dlen 12

    L2CAP(s): Disconn req: dcid = 0x0040=20 scid 0x0040

< ACL data:=20 handle 42 flags 0x02 dlen 12

    L2CAP(s): Disconn rsp: dcid = 0x0040=20 scid 0x0040

> HCI Event:=20 Number of Completed Packets (0x13) plen 5

< HCI Command:=20 Disconnect (0x01|0x0006) plen 3

> HCI Event:=20 Command Status (0x0f) plen 4

> HCI Event:=20 Disconn Complete (0x05) plen 4

 

Thanks in advance for your=20 help.

Best = Regards

 

Pierre

------=_NextPart_000_0058_01C8E7F9.13FD4EE0-- --===============2113856969== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ --===============2113856969== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users --===============2113856969==--