Hello to all,
I installed my bluetooth successfully and now I am able to use it.
I would like to support auth connection
but I do not have python gtk support.
Some times ago I used a pin helper which does not depends on python gtk support.
It was a simple bash script.
Where can I download bluez-utils package which supports auth and does
not depend on python GTK
Thanks in advance!
--
Regards,
St. Popov
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users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==
Thank you for your answer!
Actually I managed to install bluez-utils and anyremote (control my pc
via bluetooth).
but when I up the hci0 interface with auth or encrypt flags then my pc
is not discovered by my phone.
If only iscan and piscan flags are set, then everything works, but it
not requires auth.
I remembed that some months ago PIN auth was working for me but using
compiled bluez-libs and bluez-utils
packages on OpenWRT distro.
Regards,
Stanislav Popov
On Thu, Mar 20, 2008 at 3:54 PM, Marcel Holtmann <[email protected]> wrote:
> Hi,
>
>
> > I installed my bluetooth successfully and now I am able to use it.
> >
> > I would like to support auth connection
> > but I do not have python gtk support.
> >
> > Some times ago I used a pin helper which does not depends on python gtk support.
> >
> > It was a simple bash script.
> >
> > Where can I download bluez-utils package which supports auth and does
> > not depend on python GTK
>
> nothing depends on a Python GTK pin helper (actually it is called
> passkey agent).
>
> Regards
>
> Marcel
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
--
Regards,
St. Popov
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi,
> I installed my bluetooth successfully and now I am able to use it.
>
> I would like to support auth connection
> but I do not have python gtk support.
>
> Some times ago I used a pin helper which does not depends on python gtk support.
>
> It was a simple bash script.
>
> Where can I download bluez-utils package which supports auth and does
> not depend on python GTK
nothing depends on a Python GTK pin helper (actually it is called
passkey agent).
Regards
Marcel
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users