From: Subject: [PATCH v7 4/8] fsl-dma: move functions to avoid forward declarations Date: Thu, 9 Aug 2012 16:22:00 +0800 Message-ID: <1344500520-11038-1-git-send-email-qiang.liu@freescale.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , , , , Qiang Liu , Li Yang , "Ira W. Snyder" To: , , , , , Return-path: Sender: linux-kernel-owner@vger.kernel.org List-Id: linux-crypto.vger.kernel.org From: Qiang Liu These functions will be modified in the next patch in the series. By moving the function in a patch separate from the changes, it will make review easier. Cc: Dan Williams Cc: Dan Williams Cc: Vinod Koul Cc: Li Yang Signed-off-by: Ira W. Snyder Signed-off-by: Qiang Liu --- drivers/dma/fsldma.c | 230 +++++++++++++++++++++++++------------------------- 1 files changed, 115 insertions(+), 115 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index d4720d3..36490a3 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -472,6 +472,121 @@ static struct fsl_desc_sw *fsl_dma_alloc_descriptor(struct fsldma_chan *chan) } /** + * fsl_chan_xfer_ld_queue - transfer any pending transactions + * @chan : Freescale DMA channel + * + * HARDWARE STATE: idle + * LOCKING: must hold chan->desc_lock + */ +static void fsl_chan_xfer_ld_queue(struct fsldma_chan *chan) +{ + struct fsl_desc_sw *desc; + + /* + * If the list of pending descriptors is empty, then we + * don't need to do any work at all + */ + if (list_empty(&chan->ld_pending)) { + chan_dbg(chan, "no pending LDs\n"); + return; + } + + /* + * The DMA controller is not idle, which means that the interrupt + * handler will start any queued transactions when it runs after + * this transaction finishes + */ + if (!chan->idle) { + chan_dbg(chan, "DMA controller still busy\n"); + return; + } + + /* + * If there are some link descriptors which have not been + * transferred, we need to start the controller + */ + + /* + * Move all elements from the queue of pending transactions + * onto the list of running transactions + */ + chan_dbg(chan, "idle, starting controller\n"); + desc = list_first_entry(&chan->ld_pending, struct fsl_desc_sw, node); + list_splice_tail_init(&chan->ld_pending, &chan->ld_running); + + /* + * The 85xx DMA controller doesn't clear the channel start bit + * automatically at the end of a transfer. Therefore we must clear + * it in software before starting the transfer. + */ + if ((chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { + u32 mode; + + mode = DMA_IN(chan, &chan->regs->mr, 32); + mode &= ~FSL_DMA_MR_CS; + DMA_OUT(chan, &chan->regs->mr, mode, 32); + } + + /* + * Program the descriptor's address into the DMA controller, + * then start the DMA transaction + */ + set_cdar(chan, desc->async_tx.phys); + get_cdar(chan); + + dma_start(chan); + chan->idle = false; +} + +/** + * fsldma_cleanup_descriptor - cleanup and free a single link descriptor + * @chan: Freescale DMA channel + * @desc: descriptor to cleanup and free + * + * This function is used on a descriptor which has been executed by the DMA + * controller. It will run any callbacks, submit any dependencies, and then + * free the descriptor. + */ +static void fsldma_cleanup_descriptor(struct fsldma_chan *chan, + struct fsl_desc_sw *desc) +{ + struct dma_async_tx_descriptor *txd = &desc->async_tx; + struct device *dev = chan->common.device->dev; + dma_addr_t src = get_desc_src(chan, desc); + dma_addr_t dst = get_desc_dst(chan, desc); + u32 len = get_desc_cnt(chan, desc); + + /* Run the link descriptor callback function */ + if (txd->callback) { +#ifdef FSL_DMA_LD_DEBUG + chan_dbg(chan, "LD %p callback\n", desc); +#endif + txd->callback(txd->callback_param); + } + + /* Run any dependencies */ + dma_run_dependencies(txd); + + /* Unmap the dst buffer, if requested */ + if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE) + dma_unmap_single(dev, dst, len, DMA_FROM_DEVICE); + else + dma_unmap_page(dev, dst, len, DMA_FROM_DEVICE); + } + + /* Unmap the src buffer, if requested */ + if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE) + dma_unmap_single(dev, src, len, DMA_TO_DEVICE); + else + dma_unmap_page(dev, src, len, DMA_TO_DEVICE); + } + + fsl_dma_free_descriptor(chan, desc); +} + +/** * fsl_dma_alloc_chan_resources - Allocate resources for DMA channel. * @chan : Freescale DMA channel * @@ -816,121 +931,6 @@ static int fsl_dma_device_control(struct dma_chan *dchan, } /** - * fsldma_cleanup_descriptor - cleanup and free a single link descriptor - * @chan: Freescale DMA channel - * @desc: descriptor to cleanup and free - * - * This function is used on a descriptor which has been executed by the DMA - * controller. It will run any callbacks, submit any dependencies, and then - * free the descriptor. - */ -static void fsldma_cleanup_descriptor(struct fsldma_chan *chan, - struct fsl_desc_sw *desc) -{ - struct dma_async_tx_descriptor *txd = &desc->async_tx; - struct device *dev = chan->common.device->dev; - dma_addr_t src = get_desc_src(chan, desc); - dma_addr_t dst = get_desc_dst(chan, desc); - u32 len = get_desc_cnt(chan, desc); - - /* Run the link descriptor callback function */ - if (txd->callback) { -#ifdef FSL_DMA_LD_DEBUG - chan_dbg(chan, "LD %p callback\n", desc); -#endif - txd->callback(txd->callback_param); - } - - /* Run any dependencies */ - dma_run_dependencies(txd); - - /* Unmap the dst buffer, if requested */ - if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE) - dma_unmap_single(dev, dst, len, DMA_FROM_DEVICE); - else - dma_unmap_page(dev, dst, len, DMA_FROM_DEVICE); - } - - /* Unmap the src buffer, if requested */ - if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE) - dma_unmap_single(dev, src, len, DMA_TO_DEVICE); - else - dma_unmap_page(dev, src, len, DMA_TO_DEVICE); - } - - fsl_dma_free_descriptor(chan, desc); -} - -/** - * fsl_chan_xfer_ld_queue - transfer any pending transactions - * @chan : Freescale DMA channel - * - * HARDWARE STATE: idle - * LOCKING: must hold chan->desc_lock - */ -static void fsl_chan_xfer_ld_queue(struct fsldma_chan *chan) -{ - struct fsl_desc_sw *desc; - - /* - * If the list of pending descriptors is empty, then we - * don't need to do any work at all - */ - if (list_empty(&chan->ld_pending)) { - chan_dbg(chan, "no pending LDs\n"); - return; - } - - /* - * The DMA controller is not idle, which means that the interrupt - * handler will start any queued transactions when it runs after - * this transaction finishes - */ - if (!chan->idle) { - chan_dbg(chan, "DMA controller still busy\n"); - return; - } - - /* - * If there are some link descriptors which have not been - * transferred, we need to start the controller - */ - - /* - * Move all elements from the queue of pending transactions - * onto the list of running transactions - */ - chan_dbg(chan, "idle, starting controller\n"); - desc = list_first_entry(&chan->ld_pending, struct fsl_desc_sw, node); - list_splice_tail_init(&chan->ld_pending, &chan->ld_running); - - /* - * The 85xx DMA controller doesn't clear the channel start bit - * automatically at the end of a transfer. Therefore we must clear - * it in software before starting the transfer. - */ - if ((chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { - u32 mode; - - mode = DMA_IN(chan, &chan->regs->mr, 32); - mode &= ~FSL_DMA_MR_CS; - DMA_OUT(chan, &chan->regs->mr, mode, 32); - } - - /* - * Program the descriptor's address into the DMA controller, - * then start the DMA transaction - */ - set_cdar(chan, desc->async_tx.phys); - get_cdar(chan); - - dma_start(chan); - chan->idle = false; -} - -/** * fsl_dma_memcpy_issue_pending - Issue the DMA start command * @chan : Freescale DMA channel */ -- 1.7.5.1