From: Lee Jones Subject: [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones Date: Wed, 15 May 2013 10:51:54 +0100 Message-ID: <1368611522-9984-32-git-send-email-lee.jones@linaro.org> References: <1368611522-9984-1-git-send-email-lee.jones@linaro.org> Cc: arnd@arndb.de, linus.walleij@stericsson.com, srinidhi.kasagar@stericsson.com, Lee Jones , Dan Williams , Per Forlin , Rabin Vincent To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, balbi@ti.com, linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org, davem@davemloft.net, herbert@gondor.apana.org.au, vinod.koul@intel.com Return-path: In-Reply-To: <1368611522-9984-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-Id: linux-crypto.vger.kernel.org STEDMA40_*_TO_* direction definitions are identical in all but name to the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not duplicating such things. Cc: Vinod Koul Cc: Dan Williams Cc: Per Forlin Cc: Rabin Vincent Signed-off-by: Lee Jones --- drivers/dma/ste_dma40.c | 56 ++++++++++++++++++++++---------------------- drivers/dma/ste_dma40_ll.c | 24 +++++++++---------- 2 files changed, 40 insertions(+), 40 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 08bc58a..483da16 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -78,7 +78,7 @@ static int dma40_memcpy_channels[] = { /* Default configuration for physcial memcpy */ struct stedma40_chan_cfg dma40_memcpy_conf_phy = { .mode = STEDMA40_MODE_PHYSICAL, - .dir = STEDMA40_MEM_TO_MEM, + .dir = DMA_MEM_TO_MEM, .src_info.data_width = STEDMA40_BYTE_WIDTH, .src_info.psize = STEDMA40_PSIZE_PHY_1, @@ -92,7 +92,7 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = { /* Default configuration for logical memcpy */ struct stedma40_chan_cfg dma40_memcpy_conf_log = { .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_MEM, + .dir = DMA_MEM_TO_MEM, .src_info.data_width = STEDMA40_BYTE_WIDTH, .src_info.psize = STEDMA40_PSIZE_LOG_1, @@ -843,7 +843,7 @@ static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc) * that uses linked lists. */ if (!(chan->phy_chan->use_soft_lli && - chan->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)) + chan->dma_cfg.dir == DMA_DEV_TO_MEM)) curr_lcla = d40_lcla_alloc_one(chan, desc); first_lcla = curr_lcla; @@ -1311,12 +1311,12 @@ static void d40_config_set_event(struct d40_chan *d40c, u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); /* Enable event line connected to device (or memcpy) */ - if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) || - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) + if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || + (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SSLNK); - if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM) + if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM) __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SDLNK); } @@ -1774,7 +1774,7 @@ static int d40_validate_conf(struct d40_chan *d40c, res = -EINVAL; } - if (conf->dir == STEDMA40_PERIPH_TO_PERIPH) { + if (conf->dir == DMA_DEV_TO_DEV) { /* * DMAC HW supports it. Will be added to this driver, * in case any dma client requires it. @@ -1905,11 +1905,11 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) phys = d40c->base->phy_res; num_phy_chans = d40c->base->num_phy_chans; - if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) { + if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { log_num = 2 * dev_type; is_src = true; - } else if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { + } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || + d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { /* dst event lines are used for logical memcpy */ log_num = 2 * dev_type + 1; is_src = false; @@ -1920,7 +1920,7 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) event_line = D40_TYPE_TO_EVENT(dev_type); if (!is_log) { - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { + if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { /* Find physical half channel */ if (d40c->dma_cfg.use_fixed_channel) { i = d40c->dma_cfg.phy_channel; @@ -2068,10 +2068,10 @@ static int d40_free_dma(struct d40_chan *d40c) return -EINVAL; } - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) + if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || + d40c->dma_cfg.dir == DMA_MEM_TO_MEM) is_src = false; - else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) + else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) is_src = true; else { chan_err(d40c, "Unknown direction\n"); @@ -2133,10 +2133,10 @@ static bool d40_is_paused(struct d40_chan *d40c) goto _exit; } - if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH || - d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) { + if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || + d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { status = readl(chanbase + D40_CHAN_REG_SDLNK); - } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) { + } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { status = readl(chanbase + D40_CHAN_REG_SSLNK); } else { chan_err(d40c, "Unknown direction\n"); @@ -2387,12 +2387,12 @@ static void d40_set_prio_realtime(struct d40_chan *d40c) if (d40c->base->rev < 3) return; - if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) || - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) + if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || + (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true); - if ((d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH) || - (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) + if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) || + (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false); } @@ -2423,11 +2423,11 @@ static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, switch (D40_DT_FLAGS_DIR(flags)) { case 0: - cfg.dir = STEDMA40_MEM_TO_PERIPH; + cfg.dir = DMA_MEM_TO_DEV; cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); break; case 1: - cfg.dir = STEDMA40_PERIPH_TO_MEM; + cfg.dir = DMA_DEV_TO_MEM; cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); break; } @@ -2473,7 +2473,7 @@ static int d40_alloc_chan_resources(struct dma_chan *chan) d40_set_prio_realtime(d40c); if (chan_is_logical(d40c)) { - if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) + if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) d40c->lcpa = d40c->base->lcpa_base + d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE; else @@ -2746,12 +2746,12 @@ static int d40_set_runtime_config(struct dma_chan *chan, if (config->direction == DMA_DEV_TO_MEM) { config_addr = config->src_addr; - if (cfg->dir != STEDMA40_PERIPH_TO_MEM) + if (cfg->dir != DMA_DEV_TO_MEM) dev_dbg(d40c->base->dev, "channel was not configured for peripheral " "to memory transfer (%d) overriding\n", cfg->dir); - cfg->dir = STEDMA40_PERIPH_TO_MEM; + cfg->dir = DMA_DEV_TO_MEM; /* Configure the memory side */ if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) @@ -2762,12 +2762,12 @@ static int d40_set_runtime_config(struct dma_chan *chan, } else if (config->direction == DMA_MEM_TO_DEV) { config_addr = config->dst_addr; - if (cfg->dir != STEDMA40_MEM_TO_PERIPH) + if (cfg->dir != DMA_MEM_TO_DEV) dev_dbg(d40c->base->dev, "channel was not configured for memory " "to peripheral transfer (%d) overriding\n", cfg->dir); - cfg->dir = STEDMA40_MEM_TO_PERIPH; + cfg->dir = DMA_MEM_TO_DEV; /* Configure the memory side */ if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index ab5a2a7..121c0ce 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -18,23 +18,23 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg, u32 l1 = 0; /* src */ /* src is mem? -> increase address pos */ - if (cfg->dir == STEDMA40_MEM_TO_PERIPH || - cfg->dir == STEDMA40_MEM_TO_MEM) + if (cfg->dir == DMA_MEM_TO_DEV || + cfg->dir == DMA_MEM_TO_MEM) l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS; /* dst is mem? -> increase address pos */ - if (cfg->dir == STEDMA40_PERIPH_TO_MEM || - cfg->dir == STEDMA40_MEM_TO_MEM) + if (cfg->dir == DMA_DEV_TO_MEM || + cfg->dir == DMA_MEM_TO_MEM) l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS; /* src is hw? -> master port 1 */ - if (cfg->dir == STEDMA40_PERIPH_TO_MEM || - cfg->dir == STEDMA40_PERIPH_TO_PERIPH) + if (cfg->dir == DMA_DEV_TO_MEM || + cfg->dir == DMA_DEV_TO_DEV) l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS; /* dst is hw? -> master port 1 */ - if (cfg->dir == STEDMA40_MEM_TO_PERIPH || - cfg->dir == STEDMA40_PERIPH_TO_PERIPH) + if (cfg->dir == DMA_MEM_TO_DEV || + cfg->dir == DMA_DEV_TO_DEV) l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS; l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS; @@ -55,8 +55,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) u32 src = 0; u32 dst = 0; - if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + if ((cfg->dir == DMA_DEV_TO_MEM) || + (cfg->dir == DMA_DEV_TO_DEV)) { /* Set master port to 1 */ src |= 1 << D40_SREG_CFG_MST_POS; src |= D40_TYPE_TO_EVENT(cfg->dev_type); @@ -66,8 +66,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) else src |= 3 << D40_SREG_CFG_PHY_TM_POS; } - if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + if ((cfg->dir == DMA_MEM_TO_DEV) || + (cfg->dir == DMA_DEV_TO_DEV)) { /* Set master port to 1 */ dst |= 1 << D40_SREG_CFG_MST_POS; dst |= D40_TYPE_TO_EVENT(cfg->dev_type); -- 1.7.10.4