From: Dmitry Kasatkin Subject: Re: [PATCH 00/10] crypto: omap-aes: DMA and PIO mode improvements Date: Thu, 15 Aug 2013 08:58:34 +0300 Message-ID: <520C6E0A.8030505@samsung.com> References: <1376521969-16807-1-git-send-email-joelf@ti.com> <520C1327.8090607@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: Herbert Xu , "David S. Miller" , Mark Greer , Tony Lindgren , Santosh Shilimkar , Rajendra Nayak , Lokesh Vutla , Linux OMAP List , Linux ARM Kernel List , Linux Kernel Mailing List , Linux Crypto Mailing List To: joelf@ti.com Return-path: Received: from mailout2.w1.samsung.com ([210.118.77.12]:46710 "EHLO mailout2.w1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753141Ab3HOF6q (ORCPT ); Thu, 15 Aug 2013 01:58:46 -0400 In-reply-to: <520C1327.8090607@ti.com> Sender: linux-crypto-owner@vger.kernel.org List-ID: On 15/08/13 02:30, Joel Fernandes wrote: > On 08/14/2013 06:12 PM, Joel Fernandes wrote: >> This patch series is a rewrite of the DMA portion of omap-aes driver >> and also adds support for PIO mode. Both these modes, give better >> performance than before. >> >> Earlier, only a single SG was used for DMA purpose, and the SG-list >> passed from the crypto layer was being copied and DMA'd one entry at >> a time. This turns out to be quite inefficient, so we replace it with >> much simpler code that directly passes the SG-list from crypto to the >> DMA layer. >> >> We also add PIO mode support to the driver, and switch to PIO mode >> whenever the DMA channel allocation is not available. This is only for >> OMAP4 platform will work on any platform on which IRQ information is >> populated. >> >> Tests performed on am33xx and omap4 SoCs , notice the 50% perf improvement > Just correcting, this is more like 35% not 50% when using DMA. Hmm :) 1766/1460 = ~20% > > Thanks, > > -Joel > > > > > >> for large 8K blocks: >> >> Sample run on am33xx (beaglebone): >> With DMA rewrite: >> [ 26.410052] test 0 (128 bit key, 16 byte blocks): 4318 operations in 1 seconds (69088 bytes) >> [ 27.414314] test 1 (128 bit key, 64 byte blocks): 4360 operations in 1 seconds (279040 bytes) >> [ 28.414406] test 2 (128 bit key, 256 byte blocks): 3609 operations in 1 seconds (923904 bytes) >> [ 29.414410] test 3 (128 bit key, 1024 byte blocks): 3418 operations in 1 seconds (3500032 bytes) >> [ 30.414510] test 4 (128 bit key, 8192 byte blocks): 1766 operations in 1 seconds (14467072 bytes) >> >> Without DMA rewrite: >> [ 31.920519] test 0 (128 bit key, 16 byte blocks): 4417 operations in 1 seconds (70672 bytes) >> [ 32.925997] test 1 (128 bit key, 64 byte blocks): 4221 operations in 1 seconds (270144 bytes) >> [ 33.926194] test 2 (128 bit key, 256 byte blocks): 3528 operations in 1 seconds (903168 bytes) >> [ 34.926225] test 3 (128 bit key, 1024 byte blocks): 3281 operations in 1 seconds (3359744 bytes) >> [ 35.926385] test 4 (128 bit key, 8192 byte blocks): 1460 operations in 1 seconds (11960320 bytes) >> >> With PIO mode, note the tremndous boost in performance for small blocks there: >> [ 27.294905] test 0 (128 bit key, 16 byte blocks): 20585 operations in 1 seconds (329360 bytes) >> [ 28.302282] test 1 (128 bit key, 64 byte blocks): 8106 operations in 1 seconds (518784 bytes) >> [ 29.302374] test 2 (128 bit key, 256 byte blocks): 2359 operations in 1 seconds (603904 bytes) >> [ 30.302575] test 3 (128 bit key, 1024 byte blocks): 605 operations in 1 seconds (619520 bytes) >> [ 31.303781] test 4 (128 bit key, 8192 byte blocks): 79 operations in 1 seconds (647168 bytes) >> >> Future work in this direction would be to dynamically change between >> PIO/DMA mode based on the block size. >> >> Joel Fernandes (10): >> crypto: scatterwalk: Add support for calculating number of SG >> elements >> crypto: omap-aes: Add useful debug macros >> crypto: omap-aes: Populate number of SG elements >> crypto: omap-aes: Simplify DMA usage by using direct SGs >> crypto: omap-aes: Sync SG before DMA operation >> crypto: omap-aes: Remove previously used intermediate buffers >> crypto: omap-aes: Add IRQ info and helper macros >> crypto: omap-aes: PIO mode: Add IRQ handler and walk SGs >> crypto: omap-aes: PIO mode: platform data for OMAP4 and trigger it >> crypto: omap-aes: Switch to PIO mode in probe function >> >> crypto/scatterwalk.c | 22 +++ >> drivers/crypto/omap-aes.c | 400 ++++++++++++++++++++---------------------- >> include/crypto/scatterwalk.h | 2 + >> 3 files changed, 217 insertions(+), 207 deletions(-) >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-crypto" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >