From: Lee Jones Subject: [PATCH 0/6] hwrng: Add support for STMicroelectronics' RNG IP Date: Fri, 11 Sep 2015 21:08:24 +0100 Message-ID: <1442002110-28733-1-git-send-email-lee.jones@linaro.org> Cc: kernel@stlinux.com, mpm@selenic.com, herbert@gondor.apana.org.au, linux-crypto@vger.kernel.org, devicetree@vger.kernel.org, Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Return-path: Sender: linux-kernel-owner@vger.kernel.org List-Id: linux-crypto.vger.kernel.org The main aim of this set is to allow users to access ST's hardware random number generator. It's a simple device, which only requires a simple driver. We're also taking the liberty to update some out of date HWRNG documentation and making the sysfs interface a little easier to use by ignoring any '\n' which may have been inadvertently passed. Lee Jones (6): Documentation: hw_random: Fix device node name /dev/hw_random => /dev/hwrng hwrng: core: Simplify RNG switching from sysfs hwrng: st: Provide DT bindings for ST's Random Number Generator hwrng: st: Add support for ST's HW Random Number Generator ARM: STi: STiH407: Enable the 2 HW Random Number Generators for STiH4{07,10} MAINTAINERS: Add ST's Random Number Generator to the ST entry Documentation/devicetree/bindings/rng/st,rng.txt | 15 +++ Documentation/hw_random.txt | 8 +- MAINTAINERS | 1 + arch/arm/boot/dts/stih407-family.dtsi | 14 +++ drivers/char/hw_random/Kconfig | 10 ++ drivers/char/hw_random/Makefile | 1 + drivers/char/hw_random/core.c | 7 +- drivers/char/hw_random/st-rng.c | 142 +++++++++++++++++++++++ 8 files changed, 193 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/rng/st,rng.txt create mode 100644 drivers/char/hw_random/st-rng.c -- 1.9.1