From: Romain Perier Subject: [PATCH v3 3/8] hwrng: omap - Switch to non-obsolete read API implementation Date: Fri, 16 Sep 2016 12:08:51 +0200 Message-ID: <20160916100856.31727-4-romain.perier@free-electrons.com> References: <20160916100856.31727-1-romain.perier@free-electrons.com> Cc: Gregory Clement , Thomas Petazzoni , Romain Perier , Nadav Haklai , Omri Itach , Shadi Ammouri , Yahuda Yitschak , Hanna Hawa , Neta Zur Hershkovits , Igal Liberman , Marcin Wojtas , linux-crypto@vger.kernel.org To: dsaxena@plexity.net, mpm@selenic.com, Herbert Xu Return-path: Received: from down.free-electrons.com ([37.187.137.238]:60847 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752117AbcIPKMJ (ORCPT ); Fri, 16 Sep 2016 06:12:09 -0400 In-Reply-To: <20160916100856.31727-1-romain.perier@free-electrons.com> Sender: linux-crypto-owner@vger.kernel.org List-ID: The ".data_present" and ".data_read" operations are marked as OBSOLETE in the hwrng API. We have to use the ".read" operation instead. It makes the driver simpler and moves the busy loop, that waits until enough data is generated, to the read function. We simplify this step by only checking the status of the engine, if there is data, we copy the data to the output buffer and the amout of copied data is returned to the caller, otherwise zero is returned. The hwrng core will re-call the read operation as many times as required until enough data has been copied. Signed-off-by: Romain Perier --- Changes in v3: - Re-add code for busy loop that waits until enough data is generated. When no data is available, the busy loop is tried several time until the function returns to the hw_random core and then schedule_timeout_interruptible(1) is called. in v2, schedule_timeout_interruptible(1) was called each time data was not available, which added more latency. drivers/char/hw_random/omap-rng.c | 41 ++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 24 deletions(-) diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index 01d4be2..b3f6047 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -140,41 +140,35 @@ static inline void omap_rng_write(struct omap_rng_dev *priv, u16 reg, __raw_writel(val, priv->base + priv->pdata->regs[reg]); } -static int omap_rng_data_present(struct hwrng *rng, int wait) + +static int omap_rng_do_read(struct hwrng *rng, void *data, size_t max, + bool wait) { struct omap_rng_dev *priv; - int data, i; + int i, present; priv = (struct omap_rng_dev *)rng->priv; + if (max < priv->pdata->data_size) + return 0; + for (i = 0; i < 20; i++) { - data = priv->pdata->data_present(priv); - if (data || !wait) + present = priv->pdata->data_present(priv); + if (present || !wait) break; - /* RNG produces data fast enough (2+ MBit/sec, even - * during "rngtest" loads, that these delays don't - * seem to trigger. We *could* use the RNG IRQ, but - * that'd be higher overhead ... so why bother? - */ + udelay(10); } - return data; -} - -static int omap_rng_data_read(struct hwrng *rng, u32 *data) -{ - struct omap_rng_dev *priv; - u32 data_size, i; - - priv = (struct omap_rng_dev *)rng->priv; - data_size = priv->pdata->data_size; + if (!present) + return 0; - for (i = 0; i < data_size / sizeof(u32); i++) - data[i] = omap_rng_read(priv, RNG_OUTPUT_L_REG + i); + memcpy_fromio(data, priv->base + priv->pdata->regs[RNG_OUTPUT_L_REG], + priv->pdata->data_size); if (priv->pdata->regs[RNG_INTACK_REG]) omap_rng_write(priv, RNG_INTACK_REG, RNG_REG_INTACK_RDY_MASK); - return data_size; + + return priv->pdata->data_size; } static int omap_rng_init(struct hwrng *rng) @@ -195,8 +189,7 @@ static void omap_rng_cleanup(struct hwrng *rng) static struct hwrng omap_rng_ops = { .name = "omap", - .data_present = omap_rng_data_present, - .data_read = omap_rng_data_read, + .read = omap_rng_do_read, .init = omap_rng_init, .cleanup = omap_rng_cleanup, }; -- 2.9.3