From: Minchan Kim Subject: Re: [PATCH v7 0/5] Update LZ4 compressor module Date: Wed, 15 Feb 2017 16:29:44 +0900 Message-ID: <20170215072944.GB23887@bbox> References: <20170210001311.GA25078@bbox> <1486898178-17125-1-git-send-email-4sschmid@informatik.uni-hamburg.de> <20170213000324.GA5379@bbox> <20170213120841.GB22510@bierbaron.springfield.local> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Cc: , , , , , , , , , , , , , To: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Return-path: Received: from LGEAMRELO11.lge.com ([156.147.23.51]:46124 "EHLO lgeamrelo11.lge.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750716AbdBOHaD (ORCPT ); Wed, 15 Feb 2017 02:30:03 -0500 In-Reply-To: <20170213120841.GB22510@bierbaron.springfield.local> Content-Disposition: inline Sender: linux-crypto-owner@vger.kernel.org List-ID: Hi Sven, On Mon, Feb 13, 2017 at 01:08:41PM +0100, Sven Schmidt wrote: > On Mon, Feb 13, 2017 at 09:03:24AM +0900, Minchan Kim wrote: > > Hi Sven, > > > > On Sun, Feb 12, 2017 at 12:16:17PM +0100, Sven Schmidt wrote: > > > > > > > > > > > > On 02/10/2017 01:13 AM, Minchan Kim wrote: > > > > Hello Sven, > > > > > > > > On Thu, Feb 09, 2017 at 11:56:17AM +0100, Sven Schmidt wrote: > > > >> Hey Minchan, > > > >> > > > >> On Thu, Feb 09, 2017 at 08:31:21AM +0900, Minchan Kim wrote: > > > >>> Hello Sven, > > > >>> > > > >>> On Sun, Feb 05, 2017 at 08:09:03PM +0100, Sven Schmidt wrote: > > > >>>> > > > >>>> This patchset is for updating the LZ4 compression module to a version based > > > >>>> on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast > > > >>>> which provides an "acceleration" parameter as a tradeoff between > > > >>>> high compression ratio and high compression speed. > > > >>>> > > > >>>> We want to use LZ4 fast in order to support compression in lustre > > > >>>> and (mostly, based on that) investigate data reduction techniques in behalf of > > > >>>> storage systems. > > > >>>> > > > >>>> Also, it will be useful for other users of LZ4 compression, as with LZ4 fast > > > >>>> it is possible to enable applications to use fast and/or high compression > > > >>>> depending on the usecase. > > > >>>> For instance, ZRAM is offering a LZ4 backend and could benefit from an updated > > > >>>> LZ4 in the kernel. > > > >>>> > > > >>>> LZ4 homepage: http://www.lz4.org/ > > > >>>> LZ4 source repository: https://github.com/lz4/lz4 > > > >>>> Source version: 1.7.3 > > > >>>> > > > >>>> Benchmark (taken from [1], Core i5-4300U @1.9GHz): > > > >>>> ----------------|--------------|----------------|---------- > > > >>>> Compressor | Compression | Decompression | Ratio > > > >>>> ----------------|--------------|----------------|---------- > > > >>>> memcpy | 4200 MB/s | 4200 MB/s | 1.000 > > > >>>> LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 > > > >>>> LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 > > > >>>> LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 > > > >>>> LZ4 default | 385 MB/s | 1850 MB/s | 2.101 > > > >>>> > > > >>>> [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html > > > >>>> > > > >>>> [PATCH 1/5] lib: Update LZ4 compressor module > > > >>>> [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version > > > >>>> [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version > > > >>>> [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version > > > >>>> [PATCH 5/5] lib/lz4: Remove back-compat wrappers > > > >>> > > > >>> Today, I did zram-lz4 performance test with fio in current mmotm and > > > >>> found it makes regression about 20%. > > > >>> > > > >>> "lz4-update" means current mmots(git://git.cmpxchg.org/linux-mmots.git) so > > > >>> applied your 5 patches. (But now sure current mmots has recent uptodate > > > >>> patches) > > > >>> "revert" means I reverted your 5 patches in current mmots. > > > >>> > > > >>> revert lz4-update > > > >>> > > > >>> seq-write 1547 1339 86.55% > > > >>> rand-write 22775 19381 85.10% > > > >>> seq-read 7035 5589 79.45% > > > >>> rand-read 78556 68479 87.17% > > > >>> mixed-seq(R) 1305 1066 81.69% > > > >>> mixed-seq(W) 1205 984 81.66% > > > >>> mixed-rand(R) 17421 14993 86.06% > > > >>> mixed-rand(W) 17391 14968 86.07% > > > >> > > > >> which parts of the output (as well as units) are these values exactly? > > > >> I did not work with fio until now, so I think I might ask before misinterpreting my results. > > > > > > > > It is IOPS. > > > > > > > >> > > > >>> My fio description file > > > >>> > > > >>> [global] > > > >>> bs=4k > > > >>> ioengine=sync > > > >>> size=100m > > > >>> numjobs=1 > > > >>> group_reporting > > > >>> buffer_compress_percentage=30 > > > >>> scramble_buffers=0 > > > >>> filename=/dev/zram0 > > > >>> loops=10 > > > >>> fsync_on_close=1 > > > >>> > > > >>> [seq-write] > > > >>> bs=64k > > > >>> rw=write > > > >>> stonewall > > > >>> > > > >>> [rand-write] > > > >>> rw=randwrite > > > >>> stonewall > > > >>> > > > >>> [seq-read] > > > >>> bs=64k > > > >>> rw=read > > > >>> stonewall > > > >>> > > > >>> [rand-read] > > > >>> rw=randread > > > >>> stonewall > > > >>> > > > >>> [mixed-seq] > > > >>> bs=64k > > > >>> rw=rw > > > >>> stonewall > > > >>> > > > >>> [mixed-rand] > > > >>> rw=randrw > > > >>> stonewall > > > >>> > > > >> > > > >> Great, this makes it easy for me to reproduce your test. > > > > > > > > If you have trouble to reproduce, feel free to ask me. I'm happy to test it. :) > > > > > > > > Thanks! > > > > > > > > > > Hi Minchan, > > > > > > I will send an updated patch as a reply to this E-Mail. Would be really grateful If you'd test it and provide feedback! > > > The patch should be applied to the current mmots tree. > > > > > > In fact, the updated LZ4 _is_ slower than the current one in kernel. But I was not able to reproduce such large regressions > > > as you did. I now tried to define FORCE_INLINE as Eric suggested. I also inlined some functions which weren't in upstream LZ4, > > > but are defined as macros in the current kernel LZ4. The approach to replace LZ4_ARCH64 with the function call _seemed_ to behave > > > worse than the macro, so I withdrew the change. > > > > > > The main difference is, that I replaced the read32/read16/write... etc. functions using memcpy with the other ones defined > > > in upstream LZ4 (which can be switched using a macro). > > > The comment of the author stated, that they're as fast as the memcpy variants (or faster), but not as portable > > > (which does not matter since we're not dependent for multiple compilers). > > > > > > In my tests, this version is mostly as fast as the current kernel LZ4. > > > > With a patch you sent, I cannot see enhancement so I wanted to dig in and > > found how I was really careless. > > > > I have tested both test with CONFIG_KASAN. OMG. With disabling it, I don't > > see any regression any more. So, I'm really really *sorry* about noise and > > wasting your time. However, I am curious why KASAN makes such difference. > > > > Hey Minchan, > > I'm glad to hear that! Nevertheless, the changes discussed here made some differences in my own tests (I believe it got a bit > faster now) and we have the functions properly inlined, where this makes sense. Also, I added the '-O3' C-flag as Eric suggested. > So, this was not really a waste of time, I think. > > > The reason I tested new updated lz4 is description says lz4 fast and > > want to use it in zram. How can I do that? and How faster it is compared > > to old? > > > > Unfortunately, in the current implementation (in crypto/lz4.c, which is used by zram) I'm setting the acceleration parameter > (which is the paramer making the compression 'fast', see LZ4_compress_fast) to 1 (which is the default) since I did not know how this > patchset is accepted and this equals the behaviour currently available in kernel. Fair enough. > > Basically, the logic is 'higher acceleration = faster compression = lower compression ratio' and vice versa. > I included some benchmarks in my patch 0/5 E-Mail taken from the official LZ4: > > > > >>>> ----------------|--------------|----------------|---------- > > > >>>> Compressor | Compression | Decompression | Ratio > > > >>>> ----------------|--------------|----------------|---------- > > > >>>> memcpy | 4200 MB/s | 4200 MB/s | 1.000 > > > >>>> LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 > > > >>>> LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 > > > >>>> LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 > > > >>>> LZ4 default | 385 MB/s | 1850 MB/s | 2.101 > > > >>>> > > fast 50 means: acceleration=50, default: acceleration=1. I understood now. Thanks for the explanation! > > Besides the proposed patchset, I tried to implement a module parameter in crypto/lz4.c to set the acceleration factor. > In my tests, the module parameter works out great. If it works with module parameter, it means every guest of lz4 via crypto should use same acceleration level? Hmm, some system might want different acceleration level among different subsystems. Anyway, if it works, it would be great for user of zram to test/select right choice for their system workload. Thanks for the great work! > But I think this is subject to a future, separate patch. Especially since I had to 'work around' the crypto/testmgr.c, > which only tests acceleration=1 and there's no limit for acceleration. > > Thanks for your help, > > Sven