From: Alexandre Torgue Subject: Re: [PATCH v3 0/5] Add support for the STM32F4 CRC32 Date: Mon, 12 Jun 2017 11:48:22 +0200 Message-ID: <96bd3288-b4f4-87c9-2904-aa52d10ea797@st.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8"; format=flowed Content-Transfer-Encoding: 7bit Cc: , , , , , , To: Cosar Dindar , Return-path: Received: from mx08-00178001.pphosted.com ([91.207.212.93]:56670 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752065AbdFLJtO (ORCPT ); Mon, 12 Jun 2017 05:49:14 -0400 In-Reply-To: Content-Language: en-US Sender: linux-crypto-owner@vger.kernel.org List-ID: Hi Cosar, On 05/22/2017 04:33 PM, Cosar Dindar wrote: > This patch series add hardware CRC32 ("Ethernet") calculation support > for STMicroelectronics STM32F429. > > Polynomial and key setting are not supported, key is fixed as 0x4C11DB7 > and poly is 0xFFFFFFFF. > > Module is tested on STM32F429-disco board with crypto testmgr using > cases within the key 0xFFFFFFFF. > > Changes in v3: > Rearranged patch order to fix build test error. > > Cosar Dindar (5): > dt-bindings : Document the STM32F4 CRC32 binding > crypto : stm32 - Add STM32F4 CRC32 support > ARM: dts: stm32: Add CRC support to stm32f429 > ARM: dts: stm32: enable CRC32 on stm32429-disco board > ARM: dts: stm32: enable CRC32 on stm32429i-eval board > > .../devicetree/bindings/crypto/st,stm32-crc.txt | 4 +- > arch/arm/boot/dts/stm32429i-eval.dts | 4 ++ > arch/arm/boot/dts/stm32f429-disco.dts | 4 ++ > arch/arm/boot/dts/stm32f429.dtsi | 7 +++ > drivers/crypto/stm32/stm32_crc32.c | 68 ++++++++++++++++++---- > 5 files changed, 75 insertions(+), 12 deletions(-) > Patches 3, 4, 5 applied on stm32-dt-for-v4.13 regards Alex