From: Kamil Konieczny Subject: Re: [PATCH v2] crypto: s5p-sss: Add HASH support for Exynos Date: Fri, 22 Sep 2017 20:00:17 +0200 Message-ID: <8924d30c-6581-28f3-c223-c2a24c491887@partner.samsung.com> References: <20170919190341.5vi5icaxnmynywre@kozik-lap> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Cc: linux-crypto@vger.kernel.org, Herbert Xu , Vladimir Zapolskiy , "David S. Miller" , Bartlomiej Zolnierkiewicz , linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org To: Krzysztof Kozlowski Return-path: In-reply-to: <20170919190341.5vi5icaxnmynywre@kozik-lap> Content-language: en-US Sender: linux-samsung-soc-owner@vger.kernel.org List-Id: linux-crypto.vger.kernel.org On 19.09.2017 21:03, Krzysztof Kozlowski wrote: > On Fri, Sep 15, 2017 at 07:50:06PM +0200, Kamil Konieczny wrote: >> Add support for MD5, SHA1, SHA256 hash algorithms for Exynos HW. >> It uses the crypto framework asynchronous hash api. >> It is based on omap-sham.c driver. >> S5P has some HW differencies and is not implemented. >> >> Modifications in s5p-sss: >> >> - Add hash supporting structures and functions. >> >> - Modify irq handler to handle both aes and hash signals. >> >> - Resize resource end in probe if EXYNOS_HASH is enabled in >> Kconfig. >> >> - Add new copyright line and new author. >> >> - Tested on Odroid-U3 with Exynos 4412 CPU, kernel 4.13-rc6 >> with crypto run-time self test testmgr >> and with tcrypt module with: modprobe tcrypt sec=1 mode=N >> where N=402, 403, 404 (MD5, SHA1, SHA256). >> >> Modifications in drivers/crypto/Kconfig: >> >> - Add new CRYPTO_DEV_EXYNOS_HASH, depend on !EXYNOS_RNG >> and CRYPTO_DEV_S5P >> >> - Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH >> as they are nedded for fallback. >> >> Signed-off-by: Kamil Konieczny >> --- >> version 2: >> - change patch format so number of lines drops >> - change in Kconfig as suggested by Krzysztof Kozlowski, add >> EXYNOS_HASH subsection >> - change #ifndef EXYNOS_RNG into #ifdef CRYPTO_DEV_EXYNOS_HASH >> - remove style fixups in aes, as they should go in separate patch >> - remove FLOW_LOG, FLOW_DUMP macros and its uses >> - remove #if 0 ... endif >> - remove unused function hash_wait and its defines >> - fix compiler warning in dev_dbg >> - remove some comments >> - other minor fixes in comments > > Thanks for the changes. I must admit that I did not finish the review... > I found a lot of minor stuff but actually I did not look at overall > concept, architecture and how it really works. Sorry, will do it > later... No problem, I will rework this patch. Also see answers to your questions below. As I see crypto framework, transformation describes what to do, request is 'a handle' for actual operation. State for operation is kept in request context. Init, update, finup, final are async, but import and export must be synchronous, as can be deduced from crypto/testmgr.c tests. > >> drivers/crypto/Kconfig | 12 + >> drivers/crypto/s5p-sss.c | 1683 +++++++++++++++++++++++++++++++++++++++++++++- >> 2 files changed, 1674 insertions(+), 21 deletions(-) >> >> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig >> index fe33c199fc1a..2f094c433346 100644 >> --- a/drivers/crypto/Kconfig >> +++ b/drivers/crypto/Kconfig >> @@ -439,6 +439,18 @@ config CRYPTO_DEV_S5P >> Select this to offload Samsung S5PV210 or S5PC110, Exynos from AES >> algorithms execution. >> >> +config CRYPTO_DEV_EXYNOS_HASH >> + bool "Support for Samsung Exynos HASH accelerator" >> + depends on CRYPTO_DEV_S5P >> + depends on !CRYPTO_DEV_EXYNOS_RNG && CRYPTO_DEV_EXYNOS_RNG!=m >> + select CRYPTO_SHA1 >> + select CRYPTO_MD5 >> + select CRYPTO_SHA256 >> + help >> + Select this to offload Exynos from HASH MD5/SHA1/SHA256. >> + HASH algorithms will be disabled if EXYNOS_RNG >> + is enabled due to hw conflict. >> + >> config CRYPTO_DEV_NX >> bool "Support for IBM PowerPC Nest (NX) cryptographic acceleration" >> depends on PPC64 >> diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c >> index 7ac657f46d15..e951f0ffe49b 100644 >> --- a/drivers/crypto/s5p-sss.c >> +++ b/drivers/crypto/s5p-sss.c >> @@ -1,18 +1,21 @@ >> /* >> * Cryptographic API. >> * >> - * Support for Samsung S5PV210 HW acceleration. >> + * Support for Samsung S5PV210 and Exynos HW acceleration. >> * >> * Copyright (C) 2011 NetUP Inc. All rights reserved. >> + * Copyright (c) 2017 Samsung Electronics Co., Ltd. All rights reserved. >> * >> * This program is free software; you can redistribute it and/or modify >> * it under the terms of the GNU General Public License version 2 as published >> * by the Free Software Foundation. >> * >> + * Hash part based on omap-sham.c driver. >> */ >> >> #include >> #include >> +#include >> #include >> #include >> #include >> @@ -30,28 +33,41 @@ >> #include >> #include >> >> +#include >> +#include >> +#include >> +#include >> + >> #define _SBF(s, v) ((v) << (s)) >> >> /* Feed control registers */ >> #define SSS_REG_FCINTSTAT 0x0000 >> +#define SSS_FCINTSTAT_HPARTINT BIT(7) >> +#define SSS_FCINTSTAT_HDONEINT BIT(5) > > Your indentation is correct but existing uses spaces. Could you send a > follow up fixing existing indents to be consistent? Yes, I will do that, after this patch got accepted, and I will also clear some minor misspellings. > >> #define SSS_FCINTSTAT_BRDMAINT BIT(3) >> #define SSS_FCINTSTAT_BTDMAINT BIT(2) >> #define SSS_FCINTSTAT_HRDMAINT BIT(1) >> #define SSS_FCINTSTAT_PKDMAINT BIT(0) >> >> #define SSS_REG_FCINTENSET 0x0004 >> +#define SSS_FCINTENSET_HPARTINTENSET BIT(7) >> +#define SSS_FCINTENSET_HDONEINTENSET BIT(5) >> #define SSS_FCINTENSET_BRDMAINTENSET BIT(3) >> #define SSS_FCINTENSET_BTDMAINTENSET BIT(2) >> #define SSS_FCINTENSET_HRDMAINTENSET BIT(1) >> #define SSS_FCINTENSET_PKDMAINTENSET BIT(0) >> >> #define SSS_REG_FCINTENCLR 0x0008 >> +#define SSS_FCINTENCLR_HPARTINTENCLR BIT(7) >> +#define SSS_FCINTENCLR_HDONEINTENCLR BIT(5) >> #define SSS_FCINTENCLR_BRDMAINTENCLR BIT(3) >> #define SSS_FCINTENCLR_BTDMAINTENCLR BIT(2) >> #define SSS_FCINTENCLR_HRDMAINTENCLR BIT(1) >> #define SSS_FCINTENCLR_PKDMAINTENCLR BIT(0) >> >> #define SSS_REG_FCINTPEND 0x000C >> +#define SSS_FCINTPEND_HPARTINTP BIT(7) >> +#define SSS_FCINTPEND_HDONEINTP BIT(5) >> #define SSS_FCINTPEND_BRDMAINTP BIT(3) >> #define SSS_FCINTPEND_BTDMAINTP BIT(2) >> #define SSS_FCINTPEND_HRDMAINTP BIT(1) >> @@ -72,6 +88,7 @@ >> #define SSS_HASHIN_INDEPENDENT _SBF(0, 0x00) >> #define SSS_HASHIN_CIPHER_INPUT _SBF(0, 0x01) >> #define SSS_HASHIN_CIPHER_OUTPUT _SBF(0, 0x02) >> +#define SSS_HASHIN_MASK _SBF(0, 0x03) >> >> #define SSS_REG_FCBRDMAS 0x0020 >> #define SSS_REG_FCBRDMAL 0x0024 >> @@ -146,9 +163,115 @@ >> #define AES_KEY_LEN 16 >> #define CRYPTO_QUEUE_LEN 1 >> >> +/* HASH registers */ >> +#define SSS_REG_HASH_CTRL 0x00 >> + >> +#define SSS_HASH_USER_IV_EN BIT(5) >> +#define SSS_HASH_INIT_BIT BIT(4) >> +#define SSS_HASH_ENGINE_SHA1 _SBF(1, 0x00) >> +#define SSS_HASH_ENGINE_MD5 _SBF(1, 0x01) >> +#define SSS_HASH_ENGINE_SHA256 _SBF(1, 0x02) >> + >> +#define SSS_HASH_ENGINE_MASK _SBF(1, 0x03) >> + >> +#define SSS_REG_HASH_CTRL_PAUSE 0x04 >> + >> +#define SSS_HASH_PAUSE BIT(0) >> + >> +#define SSS_REG_HASH_CTRL_FIFO 0x08 >> + >> +#define SSS_HASH_FIFO_MODE_DMA BIT(0) >> +#define SSS_HASH_FIFO_MODE_CPU 0 >> + >> +#define SSS_REG_HASH_CTRL_SWAP 0x0c > > Upper case hex appears in other places so switch to 0x0C for > consistency. I will change this. >> + >> +#define SSS_HASH_BYTESWAP_DI BIT(3) >> +#define SSS_HASH_BYTESWAP_DO BIT(2) >> +#define SSS_HASH_BYTESWAP_IV BIT(1) >> +#define SSS_HASH_BYTESWAP_KEY BIT(0) >> + >> +#define SSS_REG_HASH_STATUS 0x10 >> + >> +#define SSS_HASH_STATUS_MSG_DONE BIT(6) >> +#define SSS_HASH_STATUS_PARTIAL_DONE BIT(4) >> +#define SSS_HASH_STATUS_BUFFER_READY BIT(0) >> + >> +#define SSS_REG_HASH_MSG_SIZE_LOW 0x20 >> +#define SSS_REG_HASH_MSG_SIZE_HIGH 0x24 >> + >> +#define SSS_REG_HASH_PRE_MSG_SIZE_LOW 0x28 >> +#define SSS_REG_HASH_PRE_MSG_SIZE_HIGH 0x2c >> + >> +#define SSS_REG_TYPE u32 > > This define looks useless. Yes, I will just use 4 in calc below. > >> +#define HASH_MAX_REG 16 > > Hmmmm, 16, not 8? I thought we have maximum 8 registers for result and > IV? This one describes number of registers fitting in HASH_BLOCK, but maybe this is misleading (bad description name), I will change it into 8, and will use 64 below in HASH_BLOCK_SIZE define. I used that in my internal testing for shash. > >> +#define HASH_REG_SIZEOF sizeof(SSS_REG_TYPE) >> + >> +#define HASH_BLOCK_SIZE (HASH_MAX_REG*HASH_REG_SIZEOF) >> + >> +#define HASH_MD5_MAX_REG (MD5_DIGEST_SIZE / HASH_REG_SIZEOF) >> +#define HASH_SHA1_MAX_REG (SHA1_DIGEST_SIZE / HASH_REG_SIZEOF) >> +#define HASH_SHA256_MAX_REG (SHA256_DIGEST_SIZE / HASH_REG_SIZEOF) >> + >> +#define SSS_REG_HASH_IV(s) (0xB0 + ((s) << 2)) >> +#define SSS_REG_HASH_OUT(s) (0x100 + ((s) << 2)) >> + >> +/* HASH flags */ > > All defines below have "HASH_FLAGS" prefix... so actually useful would > be to explain also what is a hash flag. These are bit numbers used by device driver, setting in dev->hash_flags, used with set_bit(), clear_bit() or test_bit(), and with macro BIT(), to keep device state BUSY or FREE, or to signal state from irq_handler to hash_tasklet. >> +#define HASH_FLAGS_BUSY 0 >> +#define HASH_FLAGS_FINAL 1 >> +#define HASH_FLAGS_DMA_ACTIVE 2 >> +#define HASH_FLAGS_OUTPUT_READY 3 >> +#define HASH_FLAGS_INIT 4 >> +#define HASH_FLAGS_DMA_READY 6 >> + >> +#define HASH_FLAGS_SGS_COPIED 9 >> +#define HASH_FLAGS_SGS_ALLOCED 10 >> +/* HASH context flags */ > > Same here. These are bit numbers internal for request context, reqctx->flags > >> +#define HASH_FLAGS_FINUP 16 >> +#define HASH_FLAGS_ERROR 17 >> + >> +#define HASH_FLAGS_MODE_MD5 18 >> +#define HASH_FLAGS_MODE_SHA1 19 >> +#define HASH_FLAGS_MODE_SHA256 20 > > These are set and not read? It is leftover from omap driver, it was used in hmac alg. I will remove it. > >> + >> +#define HASH_FLAGS_MODE_MASK (BIT(18) | BIT(19) | BIT(20)) > > Not used. > >> +/* HASH op codes */ >> +#define HASH_OP_UPDATE 1 >> +#define HASH_OP_FINAL 2 >> + >> +/* HASH HW constants */ >> +#define HASH_ALIGN_MASK (HASH_BLOCK_SIZE-1) > > Not used. > >> + >> +#define BUFLEN HASH_BLOCK_SIZE >> + >> +#define SSS_DMA_ALIGN 16 >> +#define SSS_ALIGNED __attribute__((aligned(SSS_DMA_ALIGN))) >> +#define SSS_DMA_ALIGN_MASK (SSS_DMA_ALIGN-1) > > Please make it consistent with existing code, e.g.: by replacing > AES .cra_alignmask with same macro. In separate patch of course. Thank you, I will do it in next patches. DMA align for AES is 16, and for HASH is 8 (both aligned up), but I think it is simpler to have it both 16. This align is for length, e.g when len is not divisible by 8 (HASH case), DMA FC will round it up by 8, but HASH IP consumes only bytes set by len registers (so HASH will be correctly computed). > >> + >> +/* HASH queue constant */ > > Pretty useless comment. Do not use comments which copy the code. You > could explain here why you have chosen 10 (existing AES code uses 1). > >> +#define SSS_HASH_QUEUE_LENGTH 10 Number 10 was copied from omap-sham.c The question why to use queue in device driver is good topic for RFC, I do not see any advantages for it except for corner cases, when driver receives many digest() request, or many update() from different contexts. Basically it will not queue more than one update() from one context because the state for HASH is kept in request context, e.g. once crypto user calls update() it must wait for its end before sending next. It does have some effect on design, as it allows copy bytes for small update into request context (instead of putting it in queue). >> + >> +/** >> + * struct sss_hash_algs_info - platform specific SSS HASH algorithms >> + * @algs_list: array of transformations (algorithms) >> + * @size: size >> + * @registered: counter used at probe/remove >> + * >> + * Specifies platform specific information about hash algorithms >> + * of SSS module. >> + */ >> +struct sss_hash_algs_info { >> + struct ahash_alg *algs_list; >> + unsigned int size; >> + unsigned int registered; >> +}; >> + >> /** >> * struct samsung_aes_variant - platform specific SSS driver data >> * @aes_offset: AES register offset from SSS module's base. >> + * @hash_offset: HASH register offset from SSS module's base. >> + * >> + * @hash_algs_info: HASH transformations provided by SS module >> + * @hash_algs_size: size of hash_algs_info >> * >> * Specifies platform specific configuration of SSS module. >> * Note: A structure for driver specific platform data is used for future >> @@ -156,6 +279,10 @@ >> */ >> struct samsung_aes_variant { >> unsigned int aes_offset; >> + unsigned int hash_offset; >> + >> + struct sss_hash_algs_info *hash_algs_info; >> + unsigned int hash_algs_size; >> }; >> >> struct s5p_aes_reqctx { >> @@ -194,7 +321,21 @@ struct s5p_aes_ctx { >> * req, ctx, sg_src/dst (and copies). This essentially >> * protects against concurrent access to these fields. >> * @lock: Lock for protecting both access to device hardware registers >> - * and fields related to current request (including the busy field). >> + * and fields related to current request (including the busy >> + * field). >> + * @res: Resources for hash. >> + * @io_hash_base: Per-variant offset for HASH block IO memory. >> + * @hash_lock: Lock for protecting hash_req and other HASH variables. > > I must admit that I do not see how it protects the hash_req. The > hash_req looks untouched (not read, not modified) during this lock > critical section. Can you share some more thoughts about it? It protects dev->hash_queue and dev->hash_flags in begin of function s5p_hash_handle_queue. After dequeue non-null request, bit HASH_BUSY is set in dd->hash_flags, and this bit protects dd->hash_req and other fields. From there device works with dd->hash_req until finish in irq_handler and hash_tasklet. >> + * @hash_err: Error flags for current HASH op. >> + * @hash_tasklet: New HASH request scheduling job. >> + * @xmit_buf: Buffer for current HASH request transfer into SSS block. >> + * @hash_flags: Flags for current HASH op. > > What is the purpose of them? > See above. >> + * @hash_queue: Async hash queue. >> + * @hash_req: Current request sending to SSS HASH block. >> + * @hash_sg_iter: Scatterlist transferred through DMA into SSS HASH block. >> + * @hash_sg_cnt: Counter for hash_sg_iter. >> + * >> + * @pdata: Per-variant algorithms for HASH ops. >> */ >> struct s5p_aes_dev { >> struct device *dev; >> @@ -215,16 +356,85 @@ struct s5p_aes_dev { >> struct crypto_queue queue; >> bool busy; >> spinlock_t lock; >> + >> + struct resource *res; >> + void __iomem *io_hash_base; >> + >> + spinlock_t hash_lock; >> + int hash_err; > > I do not see any setter to hash_err, except '= 0'. You are right, I blindly copied this from omap, and as I check for errors before in processing request context, this one from device is not used. I will remove it. >> + struct tasklet_struct hash_tasklet; >> + u8 xmit_buf[BUFLEN] SSS_ALIGNED; >> + >> + unsigned long hash_flags; > > This should be probably DECLARE_BITMAP. I do not get it, it is used for bits HASH_FLAGS_... and is not HW related. This will grow this patch even longer. >> + struct crypto_queue hash_queue; >> + struct ahash_request *hash_req; >> + struct scatterlist *hash_sg_iter; >> + int hash_sg_cnt; >> + >> + struct samsung_aes_variant *pdata; > > This should be const as pdata should not be modified. You are right, and I do not modify _offsets parts, but only hash functions pointers and hash array size. It is made non-const due to keeping it in the place, and not moving struct samsung_aes_variant below hash functions definitions. If I need to keep them const, then I will move whole part below, just before _probe, so I can properly set hash_algs_info and hash_algs_size (and again, small change, but bigger patch). I can do this, if you think it is safer to have them const. >> }; >> >> -static struct s5p_aes_dev *s5p_dev; >> +/** >> + * struct s5p_hash_reqctx - HASH request context >> + * @dev: Associated device >> + * @flags: Bits for current HASH request >> + * @op: Current request operation (OP_UPDATE or UP_FINAL) >> + * @digcnt: Number of bytes processed by HW (without buffer[] ones) >> + * @digest: Digest message or IV for partial result >> + * @bufcnt: Number of bytes holded in buffer[] >> + * @buflen: Max length of the input data buffer >> + * @nregs: Number of HW registers for digest or IV read/write. > > Skip the trailing dot for consistency. > >> + * @engine: Flags for setting HASH SSS block. >> + * @sg: sg for DMA transfer. >> + * @sg_len: Length of sg for DMA transfer. >> + * @sgl[]: sg for joining buffer and req->src scatterlist. >> + * @skip: Skip offset in req->src for current op. >> + * @total: Total number of bytes for current request. >> + * @buffer[]: For byte(s) from end of req->src in UPDATE op. >> + */ >> +struct s5p_hash_reqctx { >> + struct s5p_aes_dev *dd; >> + unsigned long flags; >> + int op; >> + >> + u64 digcnt; >> + u8 digest[SHA256_DIGEST_SIZE] SSS_ALIGNED; >> + u32 bufcnt; >> + u32 buflen; >> + >> + int nregs; /* digest_size / sizeof(reg) */ >> + u32 engine; >> + >> + struct scatterlist *sg; >> + int sg_len; >> + struct scatterlist sgl[2]; >> + int skip; /* skip offset in req->src sg */ >> + unsigned int total; /* total request */ >> + >> + u8 buffer[0] SSS_ALIGNED; >> +}; >> + >> +/** >> + * struct s5p_hash_ctx - HASH transformation context >> + * @dd: Associated device >> + * @flags: Bits for algorithm HASH. >> + * @fallback: Software transformation for zero message or size < BUFLEN. >> + */ >> +struct s5p_hash_ctx { >> + struct s5p_aes_dev *dd; >> + unsigned long flags; >> + struct crypto_shash *fallback; >> +}; >> >> -static const struct samsung_aes_variant s5p_aes_data = { >> +static struct samsung_aes_variant s5p_aes_data = { > > Why do you need to drop the const? This should not be modified. I explained this above. >> .aes_offset = 0x4000, >> + .hash_offset = 0x6000, >> + .hash_algs_size = 0, >> }; >> >> -static const struct samsung_aes_variant exynos_aes_data = { >> - .aes_offset = 0x200, >> +static struct samsung_aes_variant exynos_aes_data = { >> + .aes_offset = 0x200, >> + .hash_offset = 0x400, >> }; >> >> static const struct of_device_id s5p_sss_dt_match[] = { >> @@ -254,6 +464,8 @@ static inline struct samsung_aes_variant *find_s5p_sss_version >> platform_get_device_id(pdev)->driver_data; >> } >> >> +static struct s5p_aes_dev *s5p_dev; >> + > > Still some weird moves of untouched lines... this is weird. > >> static void s5p_set_dma_indata(struct s5p_aes_dev *dev, struct scatterlist *sg) >> { >> SSS_WRITE(dev, FCBRDMAS, sg_dma_address(sg)); >> @@ -436,19 +648,85 @@ static int s5p_aes_rx(struct s5p_aes_dev *dev/*, bool *set_dma*/) >> return ret; >> } >> >> +static inline u32 s5p_hash_read(struct s5p_aes_dev *dd, u32 offset) >> +{ >> + return __raw_readl(dd->io_hash_base + offset); >> +} >> + >> +static inline void s5p_hash_write(struct s5p_aes_dev *dd, >> + u32 offset, u32 value) >> +{ >> + __raw_writel(value, dd->io_hash_base + offset); >> +} >> + >> +static inline void s5p_hash_write_mask(struct s5p_aes_dev *dd, u32 address, >> + u32 value, u32 mask) >> +{ >> + u32 val; >> + >> + val = s5p_hash_read(dd, address); >> + val &= ~mask; >> + val |= value; >> + s5p_hash_write(dd, address, val); >> +} >> + >> +/** >> + * s5p_set_dma_hashdata - start DMA with sg >> + * @dev: device >> + * @sg: scatterlist ready to DMA transmit >> + * >> + * decrement sg counter >> + * write addr and len into HASH regs > > Please apply some sentence formatting. Hmm, I will just delete this, as it rewrites code. >> + * >> + * DMA starts after writing length >> + */ >> +static void s5p_set_dma_hashdata(struct s5p_aes_dev *dev, >> + struct scatterlist *sg) >> +{ >> + dev->hash_sg_cnt--; >> + WARN_ON(dev->hash_sg_cnt < 0); >> + WARN_ON(sg_dma_len(sg) <= 0); > > It cannot be less than 0... Probably decent compiler or Smatch or Sparse > points this. The question is whether you really need these checks. When > could they happen? It was for debugging only, when len hit zero driver hangs. I will remove it. >> + SSS_WRITE(dev, FCHRDMAS, sg_dma_address(sg)); >> + SSS_WRITE(dev, FCHRDMAL, sg_dma_len(sg)); /* DMA starts */ >> +} >> + >> +/** >> + * s5p_hash_rx - get next hash_sg_iter >> + * @dev: device >> + * >> + * Return: >> + * 2 if there is no more data, >> + * 1 if new receiving (input) data is ready and can be written to >> + * device > > This looks weird, if this returns only two variables this should be > bool (or 0/non-zero or enum). Or you wanted to make it consistent with > AES-stuff? Yes, it is for AES-stuff consistency. I can have two variables, both bool, or one int with three states, 0 = HASH not used, and 1 or 2 from this function. State '2' is needed for update case, so I need write HASH_PAUSE. > >> + */ >> +static int s5p_hash_rx(struct s5p_aes_dev *dev) >> +{ >> + int ret = 2; >> + >> + if (dev->hash_sg_cnt > 0) { >> + dev->hash_sg_iter = sg_next(dev->hash_sg_iter); >> + ret = 1; >> + } else { >> + set_bit(HASH_FLAGS_DMA_READY, &dev->hash_flags); >> + } >> + >> + return ret; >> +} >> + >> static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id) >> { >> struct platform_device *pdev = dev_id; >> struct s5p_aes_dev *dev = platform_get_drvdata(pdev); >> int err_dma_tx = 0; >> int err_dma_rx = 0; >> + int err_dma_hx = 0; >> bool tx_end = false; >> + bool hx_end = false; >> unsigned long flags; >> - uint32_t status; >> + u32 status, st_bits; >> int err; >> >> spin_lock_irqsave(&dev->lock, flags); >> - > > No cleanups mixed with real change. This is already a big patch... OK, sorry, I will remove this one. > >> /* >> * Handle rx or tx interrupt. If there is still data (scatterlist did not >> * reach end), then map next scatterlist entry. >> @@ -456,6 +734,8 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id) >> * >> * If there is no more data in tx scatter list, call s5p_aes_complete() >> * and schedule new tasklet. >> + * >> + * Handle hx interrupt. If there is still data map next entry. >> */ >> status = SSS_READ(dev, FCINTSTAT); >> if (status & SSS_FCINTSTAT_BRDMAINT) >> @@ -467,7 +747,29 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id) >> err_dma_tx = s5p_aes_tx(dev); >> } >> >> - SSS_WRITE(dev, FCINTPEND, status); >> + if (status & SSS_FCINTSTAT_HRDMAINT) >> + err_dma_hx = s5p_hash_rx(dev); >> + >> + st_bits = status & (SSS_FCINTSTAT_BRDMAINT | SSS_FCINTSTAT_BTDMAINT | >> + SSS_FCINTSTAT_HRDMAINT); >> + /* clear DMA bits */ > > Why only DMA bits? This is documented in Exynos 4412 spec for SecSS, DMA bits are cleared by writing the same bits to FCINTPEND, and HASH bits by writing HASH status bits into HAST_STATUS register, and the hash irq DONE and PART bits do not match hash status ones. HASH bits can be written into FCINPEND but they will be ignored. >> + SSS_WRITE(dev, FCINTPEND, st_bits); >> + >> + /* clear HASH irq bits */ >> + if (status & (SSS_FCINTSTAT_HDONEINT | SSS_FCINTSTAT_HPARTINT)) { >> + /* cannot have both HPART and HDONE */ >> + if (status & SSS_FCINTSTAT_HPARTINT) >> + st_bits = SSS_HASH_STATUS_PARTIAL_DONE; >> + >> + if (status & SSS_FCINTSTAT_HDONEINT) >> + st_bits = SSS_HASH_STATUS_MSG_DONE; >> + >> + set_bit(HASH_FLAGS_OUTPUT_READY, &dev->hash_flags); >> + s5p_hash_write(dev, SSS_REG_HASH_STATUS, st_bits); >> + hx_end = true; >> + /* when DONE or PART, do not handle HASH DMA */ >> + err_dma_hx = 0; >> + } >> >> if (err_dma_rx < 0) { >> err = err_dma_rx; >> @@ -480,6 +782,8 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id) >> >> if (tx_end) { >> s5p_sg_done(dev); >> + if (err_dma_hx == 1) >> + s5p_set_dma_hashdata(dev, dev->hash_sg_iter); >> >> spin_unlock_irqrestore(&dev->lock, flags); >> >> @@ -497,21 +801,1274 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id) >> s5p_set_dma_outdata(dev, dev->sg_dst); >> if (err_dma_rx == 1) >> s5p_set_dma_indata(dev, dev->sg_src); >> + if (err_dma_hx == 1) >> + s5p_set_dma_hashdata(dev, dev->hash_sg_iter); >> >> spin_unlock_irqrestore(&dev->lock, flags); >> } >> >> - return IRQ_HANDLED; >> + goto hash_irq_end; >> >> error: >> s5p_sg_done(dev); >> dev->busy = false; >> + if (err_dma_hx == 1) >> + s5p_set_dma_hashdata(dev, dev->hash_sg_iter); >> + >> spin_unlock_irqrestore(&dev->lock, flags); >> s5p_aes_complete(dev, err); >> >> +hash_irq_end: >> + /* >> + * Note about else if: >> + * when hash_sg_iter reaches end and its UPDATE op, >> + * issue SSS_HASH_PAUSE and wait for HPART irq >> + */ >> + if (hx_end) >> + tasklet_schedule(&dev->hash_tasklet); >> + else if ((err_dma_hx == 2) && >> + !test_bit(HASH_FLAGS_FINAL, &dev->hash_flags)) >> + s5p_hash_write(dev, SSS_REG_HASH_CTRL_PAUSE, >> + SSS_HASH_PAUSE); >> + >> return IRQ_HANDLED; >> } >> >> +/** >> + * s5p_hash_read_msg - read message or IV from HW >> + * @req: AHASH request >> + */ >> +static void s5p_hash_read_msg(struct ahash_request *req) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + struct s5p_aes_dev *dd = ctx->dd; >> + u32 *hash = (u32 *)ctx->digest; >> + int i; >> + >> + for (i = 0; i < ctx->nregs; i++) >> + hash[i] = s5p_hash_read(dd, SSS_REG_HASH_OUT(i)); >> +} >> + >> +/** >> + * s5p_hash_write_ctx_iv - write IV for next partial/finup op. >> + * @dd: device >> + * @ctx: request context >> + */ >> +static void s5p_hash_write_ctx_iv(struct s5p_aes_dev *dd, >> + struct s5p_hash_reqctx *ctx) >> +{ >> + u32 *hash = (u32 *)ctx->digest; >> + int i; >> + >> + for (i = 0; i < ctx->nregs; i++) >> + s5p_hash_write(dd, SSS_REG_HASH_IV(i), hash[i]); >> +} >> + >> +/** >> + * s5p_hash_write_iv - write IV for next partial/finup op. >> + * @req: AHASH request >> + */ >> +static void s5p_hash_write_iv(struct ahash_request *req) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + struct s5p_aes_dev *dd = ctx->dd; >> + >> + s5p_hash_write_ctx_iv(dd, ctx); >> +} >> + >> +/** >> + * s5p_hash_copy_result - copy digest into req->result >> + * @req: AHASH request >> + */ >> +static void s5p_hash_copy_result(struct ahash_request *req) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + int d = ctx->nregs; >> + >> + if (!req->result) >> + return; >> + >> + memcpy(req->result, (u8 *)ctx->digest, d * HASH_REG_SIZEOF); >> +} >> + >> +/** >> + * s5p_hash_dma_flush - flush HASH DMA >> + * @dev: secss device >> + */ >> +static void s5p_hash_dma_flush(struct s5p_aes_dev *dev) >> +{ >> + SSS_WRITE(dev, FCHRDMAC, SSS_FCHRDMAC_FLUSH); >> +} >> + >> +/** >> + * s5p_hash_dma_enable() >> + * @dev: secss device >> + * >> + * enable DMA mode for HASH >> + */ >> +static void s5p_hash_dma_enable(struct s5p_aes_dev *dev) >> +{ >> + s5p_hash_write(dev, SSS_REG_HASH_CTRL_FIFO, SSS_HASH_FIFO_MODE_DMA); >> +} >> + >> +/** >> + * s5p_hash_irq_disable - disable irq HASH signals >> + * @dev: secss device >> + * @flags: bitfield with irq's to be disabled >> + */ >> +static void s5p_hash_irq_disable(struct s5p_aes_dev *dev, u32 flags) >> +{ >> + SSS_WRITE(dev, FCINTENCLR, flags); >> +} >> + >> +/** >> + * s5p_hash_irq_enable - enable irq signals >> + * @dev: secss device >> + * @flags: bitfield with irq's to be enabled >> + */ >> +static void s5p_hash_irq_enable(struct s5p_aes_dev *dev, int flags) >> +{ >> + SSS_WRITE(dev, FCINTENSET, flags); >> +} >> + >> +/** >> + * s5p_hash_set_flow() >> + * @dev: secss device >> + * @hashflow: HASH stream flow with/without crypto AES/DES >> + */ >> +static void s5p_hash_set_flow(struct s5p_aes_dev *dev, u32 hashflow) >> +{ >> + unsigned long flags; >> + u32 flow; >> + >> + spin_lock_irqsave(&dev->lock, flags); >> + >> + flow = SSS_READ(dev, FCFIFOCTRL); >> + >> + hashflow &= SSS_HASHIN_MASK; >> + flow &= ~SSS_HASHIN_MASK; >> + flow |= hashflow; >> + >> + SSS_WRITE(dev, FCFIFOCTRL, hashflow); >> + >> + spin_unlock_irqrestore(&dev->lock, flags); >> +} >> + >> +/** >> + * s5p_ahash_dma_init - >> + * @dev: secss device >> + * @hashflow: HASH stream flow with/without AES/DES >> + * >> + * flush HASH DMA and enable DMA, >> + * set HASH stream flow inside SecSS HW >> + * enable HASH irq's HRDMA, HDONE, HPART >> + */ >> +static void s5p_ahash_dma_init(struct s5p_aes_dev *dev, u32 hashflow) >> +{ >> + s5p_hash_irq_disable(dev, SSS_FCINTENCLR_HRDMAINTENCLR | >> + SSS_FCINTENCLR_HDONEINTENCLR | >> + SSS_FCINTENCLR_HPARTINTENCLR); >> + s5p_hash_dma_flush(dev); >> + >> + s5p_hash_dma_enable(dev); >> + s5p_hash_set_flow(dev, hashflow); >> + >> + s5p_hash_irq_enable(dev, SSS_FCINTENSET_HRDMAINTENSET | >> + SSS_FCINTENSET_HDONEINTENSET | >> + SSS_FCINTENSET_HPARTINTENSET); >> +} >> + >> +/** >> + * s5p_hash_hw_init - >> + * @dev: secss device >> + */ >> +static int s5p_hash_hw_init(struct s5p_aes_dev *dev) >> +{ >> + set_bit(HASH_FLAGS_INIT, &dev->hash_flags); >> + s5p_ahash_dma_init(dev, SSS_HASHIN_INDEPENDENT); >> + >> + return 0; >> +} >> + >> +/** >> + * s5p_hash_write_ctrl - >> + * @dd: secss device >> + * @length: length for request >> + * @final: 0=not final >> + * >> + * Prepare SSS HASH block for processing bytes in DMA mode. >> + * If it is called after previous updates, fill up IV words. >> + * For final, calculate and set lengths for SSS HASH so it can >> + * finalize hash. >> + * For partial, set SSS HASH length as 2^63 so it will be never >> + * reached and set to zero prelow and prehigh. >> + * >> + * This function do not start DMA transfer. >> + */ >> +static void s5p_hash_write_ctrl(struct s5p_aes_dev *dd, size_t length, >> + int final) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(dd->hash_req); >> + u32 configflags, swapflags; >> + u32 prelow, prehigh, low, high; >> + u64 tmplen; >> + >> + configflags = ctx->engine | SSS_HASH_INIT_BIT; >> + >> + if (likely(ctx->digcnt)) { >> + s5p_hash_write_ctx_iv(dd, ctx); >> + configflags |= SSS_HASH_USER_IV_EN; >> + } >> + >> + if (final) { >> + /* number of bytes for last part */ >> + low = length; high = 0; >> + /* total number of bits prev hashed */ >> + tmplen = ctx->digcnt * 8; >> + prelow = (u32)tmplen; >> + prehigh = (u32)(tmplen >> 32); >> + } else { >> + prelow = 0; prehigh = 0; >> + low = 0; high = BIT(31); >> + } >> + >> + swapflags = SSS_HASH_BYTESWAP_DI | SSS_HASH_BYTESWAP_DO | >> + SSS_HASH_BYTESWAP_IV | SSS_HASH_BYTESWAP_KEY; >> + >> + s5p_hash_write(dd, SSS_REG_HASH_MSG_SIZE_LOW, low); >> + s5p_hash_write(dd, SSS_REG_HASH_MSG_SIZE_HIGH, high); >> + s5p_hash_write(dd, SSS_REG_HASH_PRE_MSG_SIZE_LOW, prelow); >> + s5p_hash_write(dd, SSS_REG_HASH_PRE_MSG_SIZE_HIGH, prehigh); >> + >> + s5p_hash_write(dd, SSS_REG_HASH_CTRL_SWAP, swapflags); >> + s5p_hash_write(dd, SSS_REG_HASH_CTRL, configflags); >> +} >> + >> +/** >> + * s5p_hash_xmit_dma - start DMA hash processing >> + * @dd: secss device >> + * @length: length for request >> + * @final: 0=not final >> + * >> + * Map ctx->sg into DMA_TO_DEVICE, >> + * remember sg and cnt in device dd->hash_sg_iter, dd->hash_sg_cnt >> + * so it can be used in loop inside irq handler. >> + * Update ctx->digcnt, need this to keep number of processed bytes >> + * for last final/finup request. >> + * Set dma address and length, this starts DMA, >> + * return with -EINPROGRESS. >> + * HW HASH block will issue signal for irq handler. >> + */ >> +static int s5p_hash_xmit_dma(struct s5p_aes_dev *dd, size_t length, >> + int final) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(dd->hash_req); >> + int cnt; >> + >> + dev_dbg(dd->dev, "xmit_dma: digcnt: %lld, length: %u, final: %d\n", >> + ctx->digcnt, length, final); >> + >> + cnt = dma_map_sg(dd->dev, ctx->sg, ctx->sg_len, DMA_TO_DEVICE); >> + if (!cnt) { >> + dev_err(dd->dev, "dma_map_sg error\n"); >> + set_bit(HASH_FLAGS_ERROR, &ctx->flags); >> + return -EINVAL; >> + } >> + >> + set_bit(HASH_FLAGS_DMA_ACTIVE, &dd->hash_flags); >> + dd->hash_sg_iter = ctx->sg; >> + dd->hash_sg_cnt = cnt; >> + s5p_hash_write_ctrl(dd, length, final); >> + /* update digcnt in request */ >> + ctx->digcnt += length; >> + ctx->total -= length; >> + >> + /* catch last interrupt */ >> + if (final) >> + set_bit(HASH_FLAGS_FINAL, &dd->hash_flags); >> + >> + s5p_set_dma_hashdata(dd, dd->hash_sg_iter); /* DMA starts */ >> + >> + return -EINPROGRESS; >> +} >> + >> +/** >> + * s5p_hash_copy_sgs - >> + * @ctx: request context >> + * @sg: source scatterlist request >> + * @bs: block size >> + * @new_len: number of bytes to process from sg >> + * >> + * Allocate new buffer, copy data for HASH into it. >> + * If there was xmit_buf filled, copy it first, then >> + * copy data from sg into it. >> + * Prepare one sgl[0] with allocated buffer. >> + * >> + * Set ctx->sg to sgl[0]. >> + * Set flag so we can free it after irq ends processing. >> + */ >> +static int s5p_hash_copy_sgs(struct s5p_hash_reqctx *ctx, >> + struct scatterlist *sg, int bs, int new_len) >> +{ >> + int pages; >> + void *buf; >> + int len; >> + >> + len = new_len + ctx->bufcnt; >> + pages = get_order(len); >> + >> + buf = (void *)__get_free_pages(GFP_ATOMIC, pages); >> + if (!buf) { >> + dev_err(ctx->dd->dev, "alloc pages for unaligned case.\n"); >> + set_bit(HASH_FLAGS_ERROR, &ctx->flags); >> + return -ENOMEM; >> + } >> + >> + if (ctx->bufcnt) >> + memcpy(buf, ctx->dd->xmit_buf, ctx->bufcnt); >> + >> + scatterwalk_map_and_copy(buf + ctx->bufcnt, sg, ctx->skip, >> + new_len, 0); >> + sg_init_table(ctx->sgl, 1); >> + sg_set_buf(ctx->sgl, buf, len); >> + ctx->sg = ctx->sgl; >> + ctx->sg_len = 1; >> + ctx->bufcnt = 0; >> + ctx->skip = 0; >> + set_bit(HASH_FLAGS_SGS_COPIED, &ctx->dd->hash_flags); >> + >> + return 0; >> +} >> + >> +/** >> + * s5p_hash_copy_sg_lists - >> + * @rctx: request context >> + * @sg: source scatterlist request >> + * @bs: block size >> + * @new_len: number of bytes to process from sg >> + * >> + * Allocate new scatterlist table, copy data for HASH into it. >> + * If there was xmit_buf filled, prepare it first, then >> + * copy page, length and offset from source sg into it, >> + * adjusting begin and/or end for skip offset and hash_later value. >> + * >> + * Resulting sg table will be assigned to ctx->sg. >> + * Set flag so we can free it after irq ends processing. >> + */ >> +static int s5p_hash_copy_sg_lists(struct s5p_hash_reqctx *ctx, >> + struct scatterlist *sg, int bs, int new_len) >> +{ >> + int n = sg_nents(sg); >> + struct scatterlist *tmp; >> + int offset = ctx->skip; > > Here and in some other places - while declaring many variables, some > preassigned some note, please use some consistency. It is a matter of > taste but usually this would improve readability. Preferably - looking > at existing code in s5p-sss.c - first declarations with assignments, > then rest of declarations. Lines in each group ordered with > reversed-christmas-tree. Something like in existing > s5p_aes_interrupt(), although there order comes also from code flow. > OK, I will change this. >> + >> + if (ctx->bufcnt) >> + n++; >> + >> + ctx->sg = kmalloc_array(n, sizeof(*sg), GFP_KERNEL); >> + if (!ctx->sg) { >> + set_bit(HASH_FLAGS_ERROR, &ctx->flags); >> + return -ENOMEM; >> + } >> + >> + sg_init_table(ctx->sg, n); >> + >> + tmp = ctx->sg; >> + >> + ctx->sg_len = 0; >> + >> + if (ctx->bufcnt) { >> + sg_set_buf(tmp, ctx->dd->xmit_buf, ctx->bufcnt); >> + tmp = sg_next(tmp); >> + ctx->sg_len++; >> + } >> + >> + while (sg && new_len) { >> + int len = sg->length - offset; >> + >> + if (offset) { >> + offset -= sg->length; >> + if (offset < 0) >> + offset = 0; >> + } >> + >> + if (new_len < len) >> + len = new_len; >> + >> + if (len > 0) { >> + new_len -= len; >> + sg_set_page(tmp, sg_page(sg), len, sg->offset); >> + if (new_len <= 0) >> + sg_mark_end(tmp); >> + tmp = sg_next(tmp); >> + ctx->sg_len++; >> + } >> + >> + sg = sg_next(sg); >> + } >> + >> + set_bit(HASH_FLAGS_SGS_ALLOCED, &ctx->dd->hash_flags); >> + >> + ctx->bufcnt = 0; >> + >> + return 0; >> +} >> + >> +/** >> + * s5p_hash_prepare_sgs - >> + * @sg: source scatterlist request >> + * @nbytes: number of bytes to process from sg >> + * @bs: block size >> + * @final: final flag >> + * @rctx: request context >> + * >> + * Check two conditions: (1) if buffers in sg have len aligned data, >> + * and (2) sg table have good aligned elements (list_ok) >> + * If one of this checks fails, then either >> + * (1) allocates new buffer for data with s5p_hash_copy_sgs, >> + * copy data into this buffer and prepare request in sgl, or >> + * (2) allocates new sg table and prepare sg elements >> + * >> + * For digest or finup all conditions can be good, and we may not need >> + * any fixes. >> + */ >> +static int s5p_hash_prepare_sgs(struct scatterlist *sg, >> + int nbytes, int bs, bool final, >> + struct s5p_hash_reqctx *rctx) >> +{ >> + int n = 0; >> + bool aligned = true; >> + bool list_ok = true; >> + struct scatterlist *sg_tmp = sg; >> + int offset = rctx->skip; >> + int new_len; >> + >> + if (!sg || !sg->length || !nbytes) >> + return 0; >> + >> + new_len = nbytes; >> + >> + if (offset) >> + list_ok = false; >> + >> + if (!final) >> + list_ok = false; >> + >> + while (nbytes > 0 && sg_tmp) { >> + n++; >> + >> + if (offset < sg_tmp->length) { >> + if (!IS_ALIGNED(sg_tmp->length - offset, bs)) { >> + aligned = false; >> + break; >> + } >> + } >> + >> + if (!sg_tmp->length) { >> + aligned = false; >> + break; >> + } >> + >> + if (offset) { >> + offset -= sg_tmp->length; >> + if (offset < 0) { >> + nbytes += offset; >> + offset = 0; >> + } >> + } else { >> + nbytes -= sg_tmp->length; >> + } >> + >> + sg_tmp = sg_next(sg_tmp); >> + >> + if (nbytes < 0) { /* when hash_later is > 0 */ >> + list_ok = false; >> + break; >> + } >> + } >> + >> + if (!aligned) >> + return s5p_hash_copy_sgs(rctx, sg, bs, new_len); >> + else if (!list_ok) >> + return s5p_hash_copy_sg_lists(rctx, sg, bs, new_len); >> + >> + /* have aligned data from previous operation and/or current >> + * Note: will enter here only if (digest or finup) and aligned >> + */ >> + if (rctx->bufcnt) { >> + rctx->sg_len = n; >> + sg_init_table(rctx->sgl, 2); >> + sg_set_buf(rctx->sgl, rctx->dd->xmit_buf, rctx->bufcnt); >> + sg_chain(rctx->sgl, 2, sg); >> + rctx->sg = rctx->sgl; >> + rctx->sg_len++; >> + } else { >> + rctx->sg = sg; >> + rctx->sg_len = n; >> + } >> + >> + return 0; >> +} >> + >> +/** >> + * s5p_hash_prepare_request - >> + * @req: AHASH request >> + * @update: true if UPDATE op >> + * >> + * Note 1: we can have update flag _and_ final flag at the same time. >> + * Note 2: we enter here when digcnt > BUFLEN (=HASH_BLOCK_SIZE) or >> + * either req->nbytes or ctx->bufcnt + req->nbytes is > BUFLEN or >> + * we have final op >> + */ >> +static int s5p_hash_prepare_request(struct ahash_request *req, bool update) >> +{ >> + struct s5p_hash_reqctx *rctx = ahash_request_ctx(req); >> + int bs; > > I do not see the reason for 'bs'. It is set once and then only read. > You are right, I will remove this (leftover from HMAC omap). >> + int ret; >> + int nbytes; >> + bool final = rctx->flags & BIT(HASH_FLAGS_FINUP); >> + int xmit_len, hash_later; >> + >> + if (!req) >> + return 0; >> + >> + bs = BUFLEN; >> + if (update) >> + nbytes = req->nbytes; >> + else >> + nbytes = 0; >> + >> + rctx->total = nbytes + rctx->bufcnt; >> + if (!rctx->total) >> + return 0; >> + >> + if (nbytes && (!IS_ALIGNED(rctx->bufcnt, BUFLEN))) { >> + /* bytes left from previous request, so fill up to BUFLEN */ >> + int len = BUFLEN - rctx->bufcnt % BUFLEN; >> + >> + if (len > nbytes) >> + len = nbytes; >> + >> + scatterwalk_map_and_copy(rctx->buffer + rctx->bufcnt, req->src, >> + 0, len, 0); >> + rctx->bufcnt += len; >> + nbytes -= len; >> + rctx->skip = len; >> + } else { >> + rctx->skip = 0; >> + } >> + >> + if (rctx->bufcnt) >> + memcpy(rctx->dd->xmit_buf, rctx->buffer, rctx->bufcnt); >> + >> + xmit_len = rctx->total; >> + if (final) { >> + hash_later = 0; >> + } else { >> + if (IS_ALIGNED(xmit_len, bs)) >> + xmit_len -= bs; >> + else >> + xmit_len -= xmit_len & (bs - 1); >> + >> + hash_later = rctx->total - xmit_len; >> + WARN_ON(req->nbytes == 0); >> + WARN_ON(hash_later <= 0); >> + /* == if bufcnt was BUFLEN */ >> + WARN_ON(req->nbytes < hash_later); >> + WARN_ON(rctx->skip > (req->nbytes - hash_later)); >> + /* copy hash_later bytes from end of req->src */ >> + /* previous bytes are in xmit_buf, so no overwrite */ >> + scatterwalk_map_and_copy(rctx->buffer, req->src, >> + req->nbytes - hash_later, >> + hash_later, 0); >> + } >> + >> + WARN_ON(hash_later < 0); >> + WARN_ON(nbytes < hash_later); >> + if (xmit_len > bs) { >> + WARN_ON(nbytes <= hash_later); >> + ret = s5p_hash_prepare_sgs(req->src, nbytes - hash_later, bs, >> + final, rctx); >> + if (ret) >> + return ret; >> + } else { >> + /* have buffered data only */ >> + if (unlikely(!rctx->bufcnt)) { >> + /* first update didn't fill up buffer */ >> + WARN_ON(xmit_len != BUFLEN); > > You have pretty a lot of WARNs. This raises concerns... > Some debugs lefts, I will remove this. >> + scatterwalk_map_and_copy(rctx->dd->xmit_buf, req->src, >> + 0, xmit_len, 0); >> + } >> + >> + sg_init_table(rctx->sgl, 1); >> + sg_set_buf(rctx->sgl, rctx->dd->xmit_buf, xmit_len); >> + >> + rctx->sg = rctx->sgl; >> + rctx->sg_len = 1; >> + } >> + >> + rctx->bufcnt = hash_later; >> + if (!final) >> + rctx->total = xmit_len; >> + >> + return 0; >> +} >> + >> +/** >> + * s5p_hash_update_dma_stop() >> + * @dd: secss device >> + * >> + * Unmap scatterlist ctx->sg. >> + */ >> +static int s5p_hash_update_dma_stop(struct s5p_aes_dev *dd) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(dd->hash_req); >> + >> + dma_unmap_sg(dd->dev, ctx->sg, ctx->sg_len, DMA_TO_DEVICE); >> + clear_bit(HASH_FLAGS_DMA_ACTIVE, &dd->hash_flags); >> + >> + return 0; >> +} >> + >> +/** >> + * s5p_hash_update_req - process AHASH request >> + * @dd: device s5p_aes_dev >> + * >> + * Processes the input data from AHASH request using DMA >> + * Current request should have ctx->sg prepared before. >> + * >> + * Returns: see s5p_hash_final below. >> + */ >> +static int s5p_hash_update_req(struct s5p_aes_dev *dd) >> +{ >> + struct ahash_request *req = dd->hash_req; >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + int err; >> + bool final = ctx->flags & BIT(HASH_FLAGS_FINUP); >> + >> + dev_dbg(dd->dev, "update_req: total: %u, digcnt: %lld, finup: %d\n", >> + ctx->total, ctx->digcnt, final); >> + >> + err = s5p_hash_xmit_dma(dd, ctx->total, final); >> + >> + /* wait for dma completion before can take more data */ > > Hmm... where is the wait? xmit_dma starts DMA, so we wait for irq to come. The wait itself is in users of our driver. I will remove this comment. >> + dev_dbg(dd->dev, "update: err: %d, digcnt: %lld\n", err, ctx->digcnt); > > Do you really need this? If yes, then consistent prefix with previous. > No, I do not need this debug. >> + >> + return err; >> +} >> + >> +/** >> + * s5p_hash_final_req - process the final AHASH request >> + * @dd: device s5p_aes_dev >> + * >> + * Processes the input data from the last AHASH request >> + * using . Resets the buffer counter (ctx->bufcnt) >> + * >> + * Returns: see s5p_hash_final below. >> + */ >> +static int s5p_hash_final_req(struct s5p_aes_dev *dd) >> +{ >> + struct ahash_request *req = dd->hash_req; >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + int err = 0; >> + >> + err = s5p_hash_xmit_dma(dd, ctx->total, 1); >> + ctx->bufcnt = 0; >> + dev_dbg(dd->dev, "final_req: err: %d\n", err); >> + >> + return err; >> +} >> + >> +/** >> + * s5p_hash_finish - copy calculated digest to crypto layer >> + * @req: AHASH request >> + * >> + * Copies the calculated hash value to the buffer provided >> + * by req->result >> + * >> + * Returns 0 on success and negative values on error. >> + */ >> +static int s5p_hash_finish(struct ahash_request *req) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + struct s5p_aes_dev *dd = ctx->dd; >> + int err = 0; >> + >> + if (ctx->digcnt) >> + s5p_hash_copy_result(req); >> + >> + dev_dbg(dd->dev, "digcnt: %lld, bufcnt: %d\n", ctx->digcnt, >> + ctx->bufcnt); >> + >> + return err; >> +} >> + >> +/** >> + * s5p_hash_finish_req - finish request >> + * @req: AHASH request >> + * @err: error >> + * >> + * Clear flags, free memory, >> + * if FINAL then read output into ctx->digest, >> + * call completetion >> + */ >> +static void s5p_hash_finish_req(struct ahash_request *req, int err) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + struct s5p_aes_dev *dd = ctx->dd; >> + >> + if (test_bit(HASH_FLAGS_SGS_COPIED, &dd->hash_flags)) >> + free_pages((unsigned long)sg_virt(ctx->sg), >> + get_order(ctx->sg->length)); >> + >> + if (test_bit(HASH_FLAGS_SGS_ALLOCED, &dd->hash_flags)) >> + kfree(ctx->sg); >> + >> + ctx->sg = NULL; >> + >> + dd->hash_flags &= ~(BIT(HASH_FLAGS_SGS_ALLOCED) | >> + BIT(HASH_FLAGS_SGS_COPIED)); >> + >> + if (!err && !test_bit(HASH_FLAGS_ERROR, &ctx->flags)) { >> + s5p_hash_read_msg(req); >> + if (test_bit(HASH_FLAGS_FINAL, &dd->hash_flags)) >> + err = s5p_hash_finish(req); >> + } else { >> + ctx->flags |= BIT(HASH_FLAGS_ERROR); >> + } >> + >> + /* atomic operation is not needed here */ > > Ok, but why? > Good question, I frankly copy&paste this. The hash vars in s5p_aes_dev are no longer used as all transfers ended, we have req context here so after complete we can work on next request, and clearing bit HASH_FLAGS_BUSY allows this. >> + dd->hash_flags &= ~(BIT(HASH_FLAGS_BUSY) | BIT(HASH_FLAGS_FINAL) | >> + BIT(HASH_FLAGS_DMA_READY) | >> + BIT(HASH_FLAGS_OUTPUT_READY)); >> + >> + if (req->base.complete) >> + req->base.complete(&req->base, err); >> +} >> + >> +/** >> + * s5p_hash_handle_queue - handle hash queue >> + * @dd: device s5p_aes_dev >> + * @req: AHASH request >> + * >> + * If req!=NULL enqueue it >> + * >> + * Enqueues the current AHASH request on dd->queue and >> + * if FLAGS_BUSY is not set on the device then processes >> + * the first request from the dd->queue > > Do not break lines too early. It makes reading difficult. Break at 80. OK. > >> + * >> + * Returns: see s5p_hash_final below. >> + */ >> +static int s5p_hash_handle_queue(struct s5p_aes_dev *dd, >> + struct ahash_request *req) >> +{ >> + struct crypto_async_request *async_req, *backlog; >> + struct s5p_hash_reqctx *ctx; >> + unsigned long flags; >> + int err = 0, ret = 0; >> + >> +retry: >> + spin_lock_irqsave(&dd->hash_lock, flags); >> + if (req) >> + ret = ahash_enqueue_request(&dd->hash_queue, req); >> + if (test_bit(HASH_FLAGS_BUSY, &dd->hash_flags)) { >> + spin_unlock_irqrestore(&dd->hash_lock, flags); >> + return ret; >> + } >> + backlog = crypto_get_backlog(&dd->hash_queue); >> + async_req = crypto_dequeue_request(&dd->hash_queue); >> + if (async_req) >> + set_bit(HASH_FLAGS_BUSY, &dd->hash_flags); >> + spin_unlock_irqrestore(&dd->hash_lock, flags); >> + >> + if (!async_req) >> + return ret; >> + >> + if (backlog) >> + backlog->complete(backlog, -EINPROGRESS); >> + >> + req = ahash_request_cast(async_req); >> + dd->hash_req = req; >> + ctx = ahash_request_ctx(req); >> + >> + err = s5p_hash_prepare_request(req, ctx->op == HASH_OP_UPDATE); >> + if (err || !ctx->total) >> + goto err1; >> + >> + dev_dbg(dd->dev, "handling new req, op: %u, nbytes: %d\n", >> + ctx->op, req->nbytes); >> + >> + err = s5p_hash_hw_init(dd); >> + if (err) >> + goto err1; >> + >> + dd->hash_err = 0; >> + if (ctx->digcnt) >> + /* request has changed - restore hash */ >> + s5p_hash_write_iv(req); >> + >> + if (ctx->op == HASH_OP_UPDATE) { >> + err = s5p_hash_update_req(dd); >> + if (err != -EINPROGRESS && >> + (ctx->flags & BIT(HASH_FLAGS_FINUP))) >> + /* no final() after finup() */ >> + err = s5p_hash_final_req(dd); >> + } else if (ctx->op == HASH_OP_FINAL) { >> + err = s5p_hash_final_req(dd); >> + } >> +err1: > > Just "out" as this is normal and err path. OK. > >> + dev_dbg(dd->dev, "exit, err: %d\n", err); > > More meaningful debug message. I will remove this. > >> + >> + if (err != -EINPROGRESS) { >> + /* hash_tasklet_cb will not finish it, so do it here */ >> + s5p_hash_finish_req(req, err); >> + req = NULL; >> + >> + /* >> + * Execute next request immediately if there is anything >> + * in queue. >> + */ >> + goto retry; >> + } >> + >> + return ret; >> +} >> + >> +/** >> + * s5p_hash_tasklet_cb - hash tasklet >> + * @data: ptr to s5p_aes_dev >> + * >> + */ >> +static void s5p_hash_tasklet_cb(unsigned long data) >> +{ >> + struct s5p_aes_dev *dd = (struct s5p_aes_dev *)data; >> + int err = 0; >> + >> + if (!test_bit(HASH_FLAGS_BUSY, &dd->hash_flags)) { >> + s5p_hash_handle_queue(dd, NULL); >> + return; >> + } >> + >> + if (test_bit(HASH_FLAGS_DMA_READY, &dd->hash_flags)) { >> + if (test_and_clear_bit(HASH_FLAGS_DMA_ACTIVE, >> + &dd->hash_flags)) { >> + s5p_hash_update_dma_stop(dd); >> + if (dd->hash_err) { >> + err = dd->hash_err; >> + goto finish; >> + } >> + } >> + if (test_and_clear_bit(HASH_FLAGS_OUTPUT_READY, >> + &dd->hash_flags)) { >> + /* hash or semi-hash ready */ >> + clear_bit(HASH_FLAGS_DMA_READY, &dd->hash_flags); >> + goto finish; >> + } >> + } >> + >> + return; >> + >> +finish: >> + dev_dbg(dd->dev, "update done: err: %d\n", err); > > More meaningful debug message. I will remove this. >> + /* finish curent request */ >> + s5p_hash_finish_req(dd->hash_req, err); >> + >> + /* If we are not busy, process next req */ >> + if (!test_bit(HASH_FLAGS_BUSY, &dd->hash_flags)) >> + s5p_hash_handle_queue(dd, NULL); >> +} >> + >> +/** >> + * s5p_hash_enqueue - enqueue request >> + * @req: AHASH request >> + * @op: operation UPDATE or FINAL >> + * >> + * Sets the operation flag in the AHASH request context >> + * structure and calls s5p_hash_handle_queue(). >> + * >> + * Returns: see s5p_hash_final below. >> + */ >> +static int s5p_hash_enqueue(struct ahash_request *req, unsigned int op) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + struct s5p_hash_ctx *tctx = crypto_tfm_ctx(req->base.tfm); >> + struct s5p_aes_dev *dd = tctx->dd; >> + >> + ctx->op = op; >> + >> + return s5p_hash_handle_queue(dd, req); >> +} >> + >> +/** >> + * s5p_hash_update - process the hash input data >> + * @req: AHASH request >> + * >> + * If request will fit in buffer, copy it and return immediately >> + * else enqueue it wit OP_UPDATE. >> + * >> + * Returns: see s5p_hash_final below. >> + */ >> +static int s5p_hash_update(struct ahash_request *req) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + >> + if (!req->nbytes) >> + return 0; >> + >> + if (ctx->bufcnt + req->nbytes <= BUFLEN) { >> + scatterwalk_map_and_copy(ctx->buffer + ctx->bufcnt, req->src, >> + 0, req->nbytes, 0); >> + ctx->bufcnt += req->nbytes; >> + return 0; >> + } >> + >> + return s5p_hash_enqueue(req, HASH_OP_UPDATE); >> +} >> + >> +/** >> + * s5p_hash_shash_digest - calculate shash digest >> + * @tfm: crypto transformation >> + * @flags: tfm flags >> + * @data: input data >> + * @len: length of data >> + * @out: output buffer >> + */ >> +static int s5p_hash_shash_digest(struct crypto_shash *tfm, u32 flags, >> + const u8 *data, unsigned int len, u8 *out) >> +{ >> + SHASH_DESC_ON_STACK(shash, tfm); >> + >> + shash->tfm = tfm; >> + shash->flags = flags & CRYPTO_TFM_REQ_MAY_SLEEP; >> + >> + return crypto_shash_digest(shash, data, len, out); >> +} >> + >> +/** >> + * s5p_hash_final_shash - calculate shash digest >> + * @req: AHASH request >> + * >> + * calculate digest from ctx->buffer, >> + * with data length ctx->bufcnt, >> + * store digest in req->result >> + */ >> +static int s5p_hash_final_shash(struct ahash_request *req) >> +{ >> + struct s5p_hash_ctx *tctx = crypto_tfm_ctx(req->base.tfm); >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + >> + return s5p_hash_shash_digest(tctx->fallback, req->base.flags, >> + ctx->buffer, ctx->bufcnt, req->result); >> +} >> + >> +/** >> + * s5p_hash_final - close up hash and calculate digest >> + * @req: AHASH request >> + * >> + * Set FLAGS_FINUP flag for the current AHASH request context. >> + * >> + * If there were no input data processed yet and the buffered >> + * hash data is less than BUFLEN (64) then calculate the final >> + * hash immediately by using SW algorithm fallback. >> + * >> + * Otherwise enqueues the current AHASH request with OP_FINAL >> + * operation flag and finalize hash message in HW. >> + * Note that if digcnt!=0 then there were previous update op, >> + * so there are always some buffered bytes in ctx->buffer, >> + * which means that ctx->bufcnt!=0 >> + * >> + * Returns: >> + * 0 if the request has been processed immediately, >> + * -EINPROGRESS if the operation has been queued for later >> + * execution or is set to processing by HW, >> + * -EBUSY if queue is full and request should be resubmitted later, >> + * other negative values on error. >> + * >> + * Note: req->src do not have any data >> + */ >> +static int s5p_hash_final(struct ahash_request *req) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + >> + ctx->flags |= BIT(HASH_FLAGS_FINUP); >> + >> + if (ctx->flags & BIT(HASH_FLAGS_ERROR)) >> + return -EINVAL; /* uncompleted hash is not needed */ >> + >> + /* >> + * If message is small (digcnt==0) and buffersize is less >> + * than BUFLEN, we use fallback, as using DMA + HW in this >> + * case doesn't provide any benefit. >> + * This is also the case for zero-length message. >> + */ >> + if (!ctx->digcnt && ctx->bufcnt < BUFLEN) >> + return s5p_hash_final_shash(req); >> + >> + WARN_ON(ctx->bufcnt == 0); >> + >> + return s5p_hash_enqueue(req, HASH_OP_FINAL); >> +} >> + >> +/** >> + * s5p_hash_finup - process last req->src and calculate digest >> + * @req: AHASH request containing the last update data >> + * >> + * Set FLAGS_FINUP flag in context. >> + * Call update(req) and exit if it was enqueued or is being processing. >> + * If update returns without enqueue, call final(req). >> + * >> + * Return values: see s5p_hash_final above. >> + */ >> +static int s5p_hash_finup(struct ahash_request *req) >> +{ >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + int err1, err2; >> + >> + ctx->flags |= BIT(HASH_FLAGS_FINUP); >> + >> + err1 = s5p_hash_update(req); >> + if (err1 == -EINPROGRESS || err1 == -EBUSY) >> + return err1; >> + /* >> + * final() has to be always called to cleanup resources >> + * even if update() failed, except EINPROGRESS >> + * or calculate digest for small size >> + */ >> + err2 = s5p_hash_final(req); >> + >> + return err1 ?: err2; >> +} >> + >> +/** >> + * s5p_hash_init - initialize AHASH request contex >> + * @req: AHASH request >> + * >> + * Init async hash request context. >> + */ >> +static int s5p_hash_init(struct ahash_request *req) >> +{ >> + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); >> + struct s5p_hash_ctx *tctx = crypto_ahash_ctx(tfm); >> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req); >> + struct s5p_aes_dev *dd = tctx->dd; >> + >> + ctx->dd = dd; >> + ctx->flags = 0; >> + >> + dev_dbg(dd->dev, "init: digest size: %d\n", >> + crypto_ahash_digestsize(tfm)); >> + >> + switch (crypto_ahash_digestsize(tfm)) { >> + case MD5_DIGEST_SIZE: >> + ctx->flags |= HASH_FLAGS_MODE_MD5; >> + ctx->engine = SSS_HASH_ENGINE_MD5; >> + ctx->nregs = HASH_MD5_MAX_REG; >> + break; >> + case SHA1_DIGEST_SIZE: >> + ctx->flags |= HASH_FLAGS_MODE_SHA1; >> + ctx->engine = SSS_HASH_ENGINE_SHA1; >> + ctx->nregs = HASH_SHA1_MAX_REG; >> + break; >> + case SHA256_DIGEST_SIZE: >> + ctx->flags |= HASH_FLAGS_MODE_SHA256; >> + ctx->engine = SSS_HASH_ENGINE_SHA256; >> + ctx->nregs = HASH_SHA256_MAX_REG; >> + break; >> + } >> + >> + ctx->bufcnt = 0; >> + ctx->digcnt = 0; >> + ctx->total = 0; >> + ctx->skip = 0; >> + ctx->buflen = BUFLEN; >> + >> + return 0; >> +} >> + >> +/** >> + * s5p_hash_digest - calculate digest from req->src >> + * @req: AHASH request >> + * >> + * Return values: see s5p_hash_final above. >> + */ >> +static int s5p_hash_digest(struct ahash_request *req) >> +{ >> + return s5p_hash_init(req) ?: s5p_hash_finup(req); >> +} >> + >> +/** >> + * s5p_hash_cra_init_alg - init crypto alg transformation >> + * @tfm: crypto transformation >> + */ >> +static int s5p_hash_cra_init_alg(struct crypto_tfm *tfm) >> +{ >> + struct s5p_hash_ctx *tctx = crypto_tfm_ctx(tfm); >> + const char *alg_name = crypto_tfm_alg_name(tfm); >> + >> + tctx->dd = s5p_dev; >> + /* Allocate a fallback and abort if it failed. */ >> + tctx->fallback = crypto_alloc_shash(alg_name, 0, >> + CRYPTO_ALG_NEED_FALLBACK); >> + if (IS_ERR(tctx->fallback)) { >> + pr_err("fallback alloc fails for '%s'\n", alg_name); >> + return PTR_ERR(tctx->fallback); >> + } >> + >> + crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), >> + sizeof(struct s5p_hash_reqctx) + BUFLEN); >> + >> + return 0; >> +} >> + >> +/** >> + * s5p_hash_cra_init - init crypto tfm >> + * @tfm: crypto transformation >> + */ >> +static int s5p_hash_cra_init(struct crypto_tfm *tfm) >> +{ >> + return s5p_hash_cra_init_alg(tfm); >> +} >> + >> +/** >> + * s5p_hash_cra_exit - exit crypto tfm >> + * @tfm: crypto transformation >> + * >> + * free allocated fallback >> + */ >> +static void s5p_hash_cra_exit(struct crypto_tfm *tfm) >> +{ >> + struct s5p_hash_ctx *tctx = crypto_tfm_ctx(tfm); >> + >> + crypto_free_shash(tctx->fallback); >> + tctx->fallback = NULL; >> +} >> + >> +/** >> + * s5p_hash_export - export hash state >> + * @req: AHASH request >> + * @out: buffer for exported state >> + */ >> +static int s5p_hash_export(struct ahash_request *req, void *out) >> +{ >> + struct s5p_hash_reqctx *rctx = ahash_request_ctx(req); >> + >> + memcpy(out, rctx, sizeof(*rctx) + rctx->bufcnt); >> + >> + return 0; >> +} >> + >> +/** >> + * s5p_hash_import - import hash state >> + * @req: AHASH request >> + * @in: buffer with state to be imported from >> + */ >> +static int s5p_hash_import(struct ahash_request *req, const void *in) >> +{ >> + struct s5p_hash_reqctx *rctx = ahash_request_ctx(req); >> + const struct s5p_hash_reqctx *ctx_in = in; >> + >> + WARN_ON(ctx_in->bufcnt < 0); >> + WARN_ON(ctx_in->bufcnt > BUFLEN); >> + memcpy(rctx, in, sizeof(*rctx) + BUFLEN); >> + >> + return 0; >> +} >> + >> +/** >> + * struct algs_sha1_md5 > > True. This is struct algs_sha1_md5. > I will remove this and next ones. >> + */ >> +static struct ahash_alg algs_sha1_md5[] = { >> +{ >> + .init = s5p_hash_init, >> + .update = s5p_hash_update, >> + .final = s5p_hash_final, >> + .finup = s5p_hash_finup, >> + .digest = s5p_hash_digest, >> + .halg.digestsize = SHA1_DIGEST_SIZE, >> + .halg.base = { >> + .cra_name = "sha1", >> + .cra_driver_name = "exynos-sha1", >> + .cra_priority = 100, >> + .cra_flags = CRYPTO_ALG_TYPE_AHASH | >> + CRYPTO_ALG_KERN_DRIVER_ONLY | >> + CRYPTO_ALG_ASYNC | >> + CRYPTO_ALG_NEED_FALLBACK, >> + .cra_blocksize = HASH_BLOCK_SIZE, >> + .cra_ctxsize = sizeof(struct s5p_hash_ctx), >> + .cra_alignmask = SSS_DMA_ALIGN_MASK, >> + .cra_module = THIS_MODULE, >> + .cra_init = s5p_hash_cra_init, >> + .cra_exit = s5p_hash_cra_exit, >> + } >> +}, >> +{ >> + .init = s5p_hash_init, >> + .update = s5p_hash_update, >> + .final = s5p_hash_final, >> + .finup = s5p_hash_finup, >> + .digest = s5p_hash_digest, >> + .halg.digestsize = MD5_DIGEST_SIZE, >> + .halg.base = { >> + .cra_name = "md5", >> + .cra_driver_name = "exynos-md5", >> + .cra_priority = 100, >> + .cra_flags = CRYPTO_ALG_TYPE_AHASH | >> + CRYPTO_ALG_KERN_DRIVER_ONLY | >> + CRYPTO_ALG_ASYNC | >> + CRYPTO_ALG_NEED_FALLBACK, >> + .cra_blocksize = HASH_BLOCK_SIZE, >> + .cra_ctxsize = sizeof(struct s5p_hash_ctx), >> + .cra_alignmask = SSS_DMA_ALIGN_MASK, >> + .cra_module = THIS_MODULE, >> + .cra_init = s5p_hash_cra_init, >> + .cra_exit = s5p_hash_cra_exit, >> + } >> +} >> +}; >> + >> +/** >> + * struct algs_sha256 > > Exactly. > >> + */ >> +static struct ahash_alg algs_sha256[] = { >> +{ >> + .init = s5p_hash_init, >> + .update = s5p_hash_update, >> + .final = s5p_hash_final, >> + .finup = s5p_hash_finup, >> + .digest = s5p_hash_digest, >> + .halg.digestsize = SHA256_DIGEST_SIZE, >> + .halg.base = { >> + .cra_name = "sha256", >> + .cra_driver_name = "exynos-sha256", >> + .cra_priority = 100, >> + .cra_flags = CRYPTO_ALG_TYPE_AHASH | >> + CRYPTO_ALG_KERN_DRIVER_ONLY | >> + CRYPTO_ALG_ASYNC | >> + CRYPTO_ALG_NEED_FALLBACK, >> + .cra_blocksize = HASH_BLOCK_SIZE, >> + .cra_ctxsize = sizeof(struct s5p_hash_ctx), >> + .cra_alignmask = SSS_DMA_ALIGN_MASK, >> + .cra_module = THIS_MODULE, >> + .cra_init = s5p_hash_cra_init, >> + .cra_exit = s5p_hash_cra_exit, >> + } >> +} >> +}; >> + >> +/** >> + * struct exynos_hash_algs_info > > Yeah, I know that this is exynos_hash_algs_info. > >> + */ >> +static struct sss_hash_algs_info exynos_hash_algs_info[] = { > > Can it be const? > They can, but for this I must move aes variant structures and _variant function before _probe. >> + { >> + .algs_list = algs_sha1_md5, >> + .size = ARRAY_SIZE(algs_sha1_md5), >> + }, >> + { >> + .algs_list = algs_sha256, >> + .size = ARRAY_SIZE(algs_sha256), >> + }, >> +}; >> + >> static void s5p_set_aes(struct s5p_aes_dev *dev, >> uint8_t *key, uint8_t *iv, unsigned int keylen) >> { >> @@ -822,13 +2379,16 @@ static struct crypto_alg algs[] = { >> }, >> }; >> >> +bool use_hash; > > No globals. This should not be a file-scope variable neither. > Ok, I will make it local in device. >> + >> static int s5p_aes_probe(struct platform_device *pdev) >> { >> struct device *dev = &pdev->dev; >> - int i, j, err = -ENODEV; >> + int i, hash_i, hash_algs_size = 0, j, err = -ENODEV; >> struct samsung_aes_variant *variant; >> struct s5p_aes_dev *pdata; >> struct resource *res; >> + struct sss_hash_algs_info *hash_algs_i; >> >> if (s5p_dev) >> return -EEXIST; >> @@ -837,12 +2397,38 @@ static int s5p_aes_probe(struct platform_device *pdev) >> if (!pdata) >> return -ENOMEM; >> >> + variant = find_s5p_sss_version(pdev); >> + pdata->pdata = variant; >> + >> res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> - pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res); >> - if (IS_ERR(pdata->ioaddr)) >> - return PTR_ERR(pdata->ioaddr); >> + /* HACK: HASH and PRNG uses the same registers in secss, >> + * avoid overwrite each other. This will drop HASH when >> + * CONFIG_EXYNOS_RNG is enabled. >> + * We need larger size for HASH registers in secss, current >> + * describe only AES/DES > > > Run checkpatch. > Can you write more ? What options I should use ? I ran and it gives zero errors, one warn about __attribute__(aligned()), and one about Kconfig change (description len too low). >> + */ >> + if (variant == &exynos_aes_data) { >> + pdata->pdata->hash_algs_info = exynos_hash_algs_info; >> + pdata->pdata->hash_algs_size = >> + ARRAY_SIZE(exynos_hash_algs_info); >> +#ifdef CONFIG_CRYPTO_DEV_EXYNOS_HASH >> + res->end += 0x300; >> + use_hash = true; >> +#endif >> + } >> >> - variant = find_s5p_sss_version(pdev); >> + pdata->res = res; >> + pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res); >> + if (IS_ERR(pdata->ioaddr)) { >> + if (!use_hash) >> + return PTR_ERR(pdata->ioaddr); >> + /* try AES without HASH */ >> + res->end -= 0x300; >> + use_hash = false; >> + pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res); >> + if (IS_ERR(pdata->ioaddr)) >> + return PTR_ERR(pdata->ioaddr); >> + } >> >> pdata->clk = devm_clk_get(dev, "secss"); >> if (IS_ERR(pdata->clk)) { >> @@ -857,8 +2443,10 @@ static int s5p_aes_probe(struct platform_device *pdev) >> } >> >> spin_lock_init(&pdata->lock); >> + spin_lock_init(&pdata->hash_lock); >> >> pdata->aes_ioaddr = pdata->ioaddr + variant->aes_offset; >> + pdata->io_hash_base = pdata->ioaddr + variant->hash_offset; >> >> pdata->irq_fc = platform_get_irq(pdev, 0); >> if (pdata->irq_fc < 0) { >> @@ -877,6 +2465,7 @@ static int s5p_aes_probe(struct platform_device *pdev) >> pdata->busy = false; >> pdata->dev = dev; >> platform_set_drvdata(pdev, pdata); >> + > > Separate patch. Ok, sorry. >> s5p_dev = pdata; >> >> tasklet_init(&pdata->tasklet, s5p_tasklet_cb, (unsigned long)pdata); >> @@ -884,17 +2473,58 @@ static int s5p_aes_probe(struct platform_device *pdev) >> >> for (i = 0; i < ARRAY_SIZE(algs); i++) { >> err = crypto_register_alg(&algs[i]); >> - if (err) >> + if (err) { >> + dev_err(dev, "can't register '%s': %d\n", >> + algs[i].cra_name, err); > > Looks like candidate for separate patch. > Hmm, I can make it here, or introduce 'if(i < ARRAY_SIZE(algs))' at err_algs, as err_algs is entered after goto err_hash. >> goto err_algs; >> + } >> + } >> + >> + if (use_hash) { >> + hash_algs_size = pdata->pdata->hash_algs_size; >> + tasklet_init(&pdata->hash_tasklet, s5p_hash_tasklet_cb, >> + (unsigned long)pdata); >> + crypto_init_queue(&pdata->hash_queue, SSS_HASH_QUEUE_LENGTH); >> + } >> + >> + for (hash_i = 0; hash_i < hash_algs_size; hash_i++) { >> + hash_algs_i = pdata->pdata->hash_algs_info; >> + hash_algs_i[hash_i].registered = 0; >> + for (j = 0; j < hash_algs_i[hash_i].size; j++) { >> + struct ahash_alg *alg; >> + >> + alg = &(hash_algs_i[hash_i].algs_list[j]); >> + alg->export = s5p_hash_export; >> + alg->import = s5p_hash_import; >> + alg->halg.statesize = sizeof(struct s5p_hash_reqctx) + >> + BUFLEN; >> + err = crypto_register_ahash(alg); >> + if (err) { >> + dev_err(dev, "can't register '%s': %d\n", >> + alg->halg.base.cra_driver_name, err); >> + goto err_hash; >> + } >> + >> + hash_algs_i[hash_i].registered++; >> + } >> } >> >> dev_info(dev, "s5p-sss driver registered\n"); >> >> return 0; >> >> -err_algs: >> - dev_err(dev, "can't register '%s': %d\n", algs[i].cra_name, err); >> +err_hash: >> + for (hash_i = hash_algs_size - 1; hash_i >= 0; hash_i--) >> + for (j = hash_algs_i[hash_i].registered - 1; >> + j >= 0; j--) >> + crypto_unregister_ahash( >> + &(hash_algs_i[hash_i].algs_list[j])); >> + >> + tasklet_kill(&pdata->hash_tasklet); >> + res->end -= 0x300; >> + use_hash = false; >> >> +err_algs: >> for (j = 0; j < i; j++) >> crypto_unregister_alg(&algs[j]); >> >> @@ -911,7 +2541,8 @@ static int s5p_aes_probe(struct platform_device *pdev) >> static int s5p_aes_remove(struct platform_device *pdev) >> { >> struct s5p_aes_dev *pdata = platform_get_drvdata(pdev); >> - int i; >> + struct sss_hash_algs_info *hash_algs_i; >> + int i, j; >> >> if (!pdata) >> return -ENODEV; >> @@ -919,10 +2550,19 @@ static int s5p_aes_remove(struct platform_device *pdev) >> for (i = 0; i < ARRAY_SIZE(algs); i++) >> crypto_unregister_alg(&algs[i]); >> >> - tasklet_kill(&pdata->tasklet); >> + if (use_hash) { >> + hash_algs_i = pdata->pdata->hash_algs_info; >> + for (i = pdata->pdata->hash_algs_size - 1; i >= 0; i--) >> + for (j = hash_algs_i[i].registered - 1; j >= 0; j--) >> + crypto_unregister_ahash( >> + &(hash_algs_i[i].algs_list[j])); >> + pdata->res->end -= 0x300; >> + tasklet_kill(&pdata->hash_tasklet); >> + use_hash = false; >> + } >> >> + tasklet_kill(&pdata->tasklet); > > Why this line is in this commit? There is no change here... I will try add 'if (use_hash) ...' after tasklet_kill > > Best regards, > Krzysztof > > >> clk_disable_unprepare(pdata->clk); >> - >> s5p_dev = NULL; >> >> return 0; >> @@ -942,3 +2582,4 @@ module_platform_driver(s5p_aes_crypto); >> MODULE_DESCRIPTION("S5PV210 AES hw acceleration support."); >> MODULE_LICENSE("GPL v2"); >> MODULE_AUTHOR("Vladimir Zapolskiy "); >> +MODULE_AUTHOR("Kamil Konieczny "); >> -- >> 2.14.1.536.g6867272d5b56 >> >> -- Best regards, Kamil Konieczny Samsung R&D Institute Poland