Received-SPF: pass (google.com: domain of linux-crypto-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Varshini Rajendran <varshini.rajendran@microchip.com>
To:     <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <conor+dt@kernel.org>, <nicolas.ferre@microchip.com>,
        <alexandre.belloni@bootlin.com>, <claudiu.beznea@microchip.com>,
        <mturquette@baylibre.com>, <sboyd@kernel.org>,
        <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
        <vkoul@kernel.org>, <tglx@linutronix.de>, <maz@kernel.org>,
        <lee@kernel.org>, <ulf.hansson@linaro.org>,
        <tudor.ambarus@linaro.org>, <miquel.raynal@bootlin.com>,
        <richard@nod.at>, <vigneshr@ti.com>, <edumazet@google.com>,
        <kuba@kernel.org>, <pabeni@redhat.com>, <linus.walleij@linaro.org>,
        <p.zabel@pengutronix.de>, <olivia@selenic.com>,
        <a.zummo@towertech.it>, <radu_nicolae.pirea@upb.ro>,
        <richard.genoud@gmail.com>, <gregkh@linuxfoundation.org>,
        <lgirdwood@gmail.com>, <broonie@kernel.org>,
        <wim@linux-watchdog.org>, <linux@roeck-us.net>, <arnd@arndb.de>,
        <olof@lixom.net>, <soc@kernel.org>, <linux@armlinux.org.uk>,
        <sre@kernel.org>, <jerry.ray@microchip.com>,
        <horatiu.vultur@microchip.com>, <durai.manickamkr@microchip.com>,
        <varshini.rajendran@microchip.com>, <andrew@lunn.ch>,
        <alain.volmat@foss.st.com>, <neil.armstrong@linaro.org>,
        <mihai.sain@microchip.com>, <eugen.hristev@collabora.com>,
        <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
        <linux-crypto@vger.kernel.org>, <dmaengine@vger.kernel.org>,
        <linux-i2c@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
        <linux-mtd@lists.infradead.org>, <netdev@vger.kernel.org>,
        <linux-gpio@vger.kernel.org>, <linux-rtc@vger.kernel.org>,
        <linux-spi@vger.kernel.org>, <linux-serial@vger.kernel.org>,
        <alsa-devel@alsa-project.org>, <linux-usb@vger.kernel.org>,
        <linux-watchdog@vger.kernel.org>, <linux-pm@vger.kernel.org>
CC:     <Hari.PrasathGE@microchip.com>, <cristian.birsan@microchip.com>,
        <balamanikandan.gunasundar@microchip.com>,
        <manikandan.m@microchip.com>, <dharma.b@microchip.com>,
        <nayabbasha.sayed@microchip.com>, <balakrishnan.s@microchip.com>
Subject: [PATCH v2 08/45] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs
Date:   Sat, 24 Jun 2023 02:00:19 +0530
Message-ID: <20230623203056.689705-9-varshini.rajendran@microchip.com>
In-Reply-To: <20230623203056.689705-1-varshini.rajendran@microchip.com>
References: <20230623203056.689705-1-varshini.rajendran@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

SAM9X7 SoC family supports different core output frequencies for
different PLL IDs. To handle the same in the PLL driver, a separate
parameter core_output is added. The sam9x60 and sama7g5 SoC PMC drivers
are aligned to the PLL driver by adding the core output freq range in
the PLL characteristics configurations.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 drivers/clk/at91/clk-sam9x60-pll.c | 12 ++++++------
 drivers/clk/at91/pmc.h             |  1 +
 drivers/clk/at91/sam9x60.c         |  7 +++++++
 drivers/clk/at91/sama7g5.c         |  7 +++++++
 4 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index 0882ed01d5c2..b3012641214c 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -23,9 +23,6 @@
 #define UPLL_DIV		2
 #define PLL_MUL_MAX		(FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1)
 
-#define FCORE_MIN		(600000000)
-#define FCORE_MAX		(1200000000)
-
 #define PLL_MAX_ID		7
 
 struct sam9x60_pll_core {
@@ -194,7 +191,8 @@ static long sam9x60_frac_pll_compute_mul_frac(struct sam9x60_pll_core *core,
 	unsigned long nmul = 0;
 	unsigned long nfrac = 0;
 
-	if (rate < FCORE_MIN || rate > FCORE_MAX)
+	if (rate < core->characteristics->core_output[0].min ||
+	    rate > core->characteristics->core_output[0].max)
 		return -ERANGE;
 
 	/*
@@ -214,7 +212,8 @@ static long sam9x60_frac_pll_compute_mul_frac(struct sam9x60_pll_core *core,
 	}
 
 	/* Check if resulted rate is a valid.  */
-	if (tmprate < FCORE_MIN || tmprate > FCORE_MAX)
+	if (tmprate < core->characteristics->core_output[0].min ||
+	    tmprate > core->characteristics->core_output[0].max)
 		return -ERANGE;
 
 	if (update) {
@@ -666,7 +665,8 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
 			goto free;
 		}
 
-		ret = sam9x60_frac_pll_compute_mul_frac(&frac->core, FCORE_MIN,
+		ret = sam9x60_frac_pll_compute_mul_frac(&frac->core,
+							characteristics->core_output[0].min,
 							parent_rate, true);
 		if (ret < 0) {
 			hw = ERR_PTR(ret);
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 1b3ca7dd9b57..3e36dcc464c1 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -75,6 +75,7 @@ struct clk_pll_characteristics {
 	struct clk_range input;
 	int num_output;
 	const struct clk_range *output;
+	const struct clk_range *core_output;
 	u16 *icpll;
 	u8 *out;
 	u8 upll : 1;
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index ac070db58195..452ad45cf251 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -26,10 +26,16 @@ static const struct clk_range plla_outputs[] = {
 	{ .min = 2343750, .max = 1200000000 },
 };
 
+/* Fractional PLL core output range. */
+static const struct clk_range core_outputs[] = {
+	{ .min = 600000000, .max = 1200000000 },
+};
+
 static const struct clk_pll_characteristics plla_characteristics = {
 	.input = { .min = 12000000, .max = 48000000 },
 	.num_output = ARRAY_SIZE(plla_outputs),
 	.output = plla_outputs,
+	.core_output = core_outputs,
 };
 
 static const struct clk_range upll_outputs[] = {
@@ -40,6 +46,7 @@ static const struct clk_pll_characteristics upll_characteristics = {
 	.input = { .min = 12000000, .max = 48000000 },
 	.num_output = ARRAY_SIZE(upll_outputs),
 	.output = upll_outputs,
+	.core_output = core_outputs,
 	.upll = true,
 };
 
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index f135b662f1ff..468a3c5449b5 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -104,11 +104,17 @@ static const struct clk_range pll_outputs[] = {
 	{ .min = 2343750, .max = 1200000000 },
 };
 
+/* Fractional PLL core output range. */
+static const struct clk_range core_outputs[] = {
+	{ .min = 600000000, .max = 1200000000 },
+};
+
 /* CPU PLL characteristics. */
 static const struct clk_pll_characteristics cpu_pll_characteristics = {
 	.input = { .min = 12000000, .max = 50000000 },
 	.num_output = ARRAY_SIZE(cpu_pll_outputs),
 	.output = cpu_pll_outputs,
+	.core_output = core_outputs,
 };
 
 /* PLL characteristics. */
@@ -116,6 +122,7 @@ static const struct clk_pll_characteristics pll_characteristics = {
 	.input = { .min = 12000000, .max = 50000000 },
 	.num_output = ARRAY_SIZE(pll_outputs),
 	.output = pll_outputs,
+	.core_output = core_outputs,
 };
 
 /*
-- 
2.25.1