Received-SPF: pass (google.com: domain of linux-crypto+bounces-4027-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Lothar Rubusch <l.rubusch@gmail.com>
To: herbert@gondor.apana.org.au,
	davem@davemloft.net
Cc: nicolas.ferre@microchip.com,
	alexandre.belloni@bootlin.com,
	claudiu.beznea@tuxon.dev,
	linux-crypto@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	l.rubusch@gmail.com
Subject: [PATCH v2 3/4] crypto: atmel-sha204a - add reading from otp zone
Date: Fri,  3 May 2024 21:10:53 +0000
Message-Id: <20240503211054.1231-4-l.rubusch@gmail.com>
In-Reply-To: <20240503211054.1231-1-l.rubusch@gmail.com>
References: <20240503211054.1231-1-l.rubusch@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Provide a read function reading the otp zone. The otp zone can be used for
storing serial numbers. The otp zone, as also data zone, are only
accessible if the chip was locked before. Locking the chip is a post
production customization and has to be done manually i.e. not by this
driver. Without this step the chip is pretty much not usable, where
putting or not putting data into the otp zone is optional.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/crypto/atmel-i2c.c     | 24 ++++++++++++++++++++++++
 drivers/crypto/atmel-i2c.h     |  5 +++++
 drivers/crypto/atmel-sha204a.c | 23 +++++++++++++++++++++++
 3 files changed, 52 insertions(+)

diff --git a/drivers/crypto/atmel-i2c.c b/drivers/crypto/atmel-i2c.c
index a0d0d4f2a..a895e4289 100644
--- a/drivers/crypto/atmel-i2c.c
+++ b/drivers/crypto/atmel-i2c.c
@@ -70,6 +70,30 @@ void atmel_i2c_init_read_config_cmd(struct atmel_i2c_cmd *cmd)
 }
 EXPORT_SYMBOL(atmel_i2c_init_read_config_cmd);
 
+int atmel_i2c_init_read_otp_cmd(struct atmel_i2c_cmd *cmd, u16 addr)
+{
+	if (addr < 0 || addr > OTP_ZONE_SIZE)
+		return -1;
+
+	cmd->word_addr = COMMAND;
+	cmd->opcode = OPCODE_READ;
+	/*
+	 * Read the word from OTP zone that may contain e.g. serial
+	 * numbers or similar if persistently pre-initialized and locked
+	 */
+	cmd->param1 = OTP_ZONE;
+	cmd->param2 = cpu_to_le16(addr);
+	cmd->count = READ_COUNT;
+
+	atmel_i2c_checksum(cmd);
+
+	cmd->msecs = MAX_EXEC_TIME_READ;
+	cmd->rxsize = READ_RSP_SIZE;
+
+	return 0;
+}
+EXPORT_SYMBOL(atmel_i2c_init_read_otp_cmd);
+
 void atmel_i2c_init_random_cmd(struct atmel_i2c_cmd *cmd)
 {
 	cmd->word_addr = COMMAND;
diff --git a/drivers/crypto/atmel-i2c.h b/drivers/crypto/atmel-i2c.h
index 275297a82..72f04c156 100644
--- a/drivers/crypto/atmel-i2c.h
+++ b/drivers/crypto/atmel-i2c.h
@@ -64,6 +64,10 @@ struct atmel_i2c_cmd {
 
 /* Definitions for eeprom organization */
 #define CONFIGURATION_ZONE		0
+#define OTP_ZONE			1
+
+/* Definitions for eeprom zone sizes */
+#define OTP_ZONE_SIZE			64
 
 /* Definitions for Indexes common to all commands */
 #define RSP_DATA_IDX			1 /* buffer index of data in response */
@@ -179,6 +183,7 @@ void atmel_i2c_flush_queue(void);
 int atmel_i2c_send_receive(struct i2c_client *client, struct atmel_i2c_cmd *cmd);
 
 void atmel_i2c_init_read_config_cmd(struct atmel_i2c_cmd *cmd);
+int atmel_i2c_init_read_otp_cmd(struct atmel_i2c_cmd *cmd, u16 addr);
 void atmel_i2c_init_random_cmd(struct atmel_i2c_cmd *cmd);
 void atmel_i2c_init_genkey_cmd(struct atmel_i2c_cmd *cmd, u16 keyid);
 int atmel_i2c_init_ecdh_cmd(struct atmel_i2c_cmd *cmd,
diff --git a/drivers/crypto/atmel-sha204a.c b/drivers/crypto/atmel-sha204a.c
index c77f482d2..563a0493b 100644
--- a/drivers/crypto/atmel-sha204a.c
+++ b/drivers/crypto/atmel-sha204a.c
@@ -91,6 +91,29 @@ static int atmel_sha204a_rng_read(struct hwrng *rng, void *data, size_t max,
 	return max;
 }
 
+static int atmel_sha204a_otp_read(struct i2c_client *client, u16 addr, u8 *otp)
+{
+	struct atmel_i2c_cmd cmd;
+	int ret = -1;
+
+	if (atmel_i2c_init_read_otp_cmd(&cmd, addr) < 0) {
+		dev_err(&client->dev, "failed, invalid otp address %04X\n",
+			addr);
+		return ret;
+	}
+
+	ret = atmel_i2c_send_receive(client, &cmd);
+
+	if (cmd.data[0] == 0xff) {
+		dev_err(&client->dev, "failed, device not ready\n");
+		return -ret;
+	}
+
+	memcpy(otp, cmd.data+1, 4);
+
+	return ret;
+}
+
 static int atmel_sha204a_probe(struct i2c_client *client)
 {
 	struct atmel_i2c_client_priv *i2c_priv;
-- 
2.25.1