From: Ye Bin <[email protected]>
Syzbot found the following issue:
loop0: detected capacity change from 0 to 2048
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
==================================================================
BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:306
print_report+0x107/0x1f0 mm/kasan/report.c:417
kasan_report+0xcd/0x100 mm/kasan/report.c:517
ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
ext4_file_write_iter+0x1d0/0x18f0
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4b7a9737b9
RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Above issue is happens when enable bigalloc and inline data feature. As
commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for
bigalloc + inline. But it only resolved issue when has inline data, if
inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
i_data is still store inline data in this scene. Then will trigger UAF
when find extent.
To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
in ext4_clu_mapped().
Reported-by: [email protected]
Fixes: 131294c35ed6 ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline")
Signed-off-by: Ye Bin <[email protected]>
---
fs/ext4/extents.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 9de1c9d1a13d..ee5acf2bd5e6 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -5802,7 +5802,8 @@ int ext4_clu_mapped(struct inode *inode, ext4_lblk_t lclu)
* mapped - no physical clusters have been allocated, and the
* file has no extents
*/
- if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
+ if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) ||
+ ext4_has_inline_data(inode))
return 0;
/* search for the extent closest to the first block in the cluster */
--
2.31.1
On 04.01.2023 09:15, Ye Bin wrote:
> From: Ye Bin <[email protected]>
>
> Syzbot found the following issue:
> loop0: detected capacity change from 0 to 2048
> EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
> ==================================================================
> BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
> BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
> Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
>
> CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
> Call Trace:
> <TASK>
> __dump_stack lib/dump_stack.c:88 [inline]
> dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
> print_address_description+0x74/0x340 mm/kasan/report.c:306
> print_report+0x107/0x1f0 mm/kasan/report.c:417
> kasan_report+0xcd/0x100 mm/kasan/report.c:517
> ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
> ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
> ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
> ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
> ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
> ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
> ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
> ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
> generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
> ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
> ext4_file_write_iter+0x1d0/0x18f0
> call_write_iter include/linux/fs.h:2186 [inline]
> new_sync_write fs/read_write.c:491 [inline]
> vfs_write+0x7dc/0xc50 fs/read_write.c:584
> ksys_write+0x177/0x2a0 fs/read_write.c:637
> do_syscall_x64 arch/x86/entry/common.c:50 [inline]
> do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
> entry_SYSCALL_64_after_hwframe+0x63/0xcd
> RIP: 0033:0x7f4b7a9737b9
> RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
> RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
> RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
> RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
> R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> </TASK>
>
> Above issue is happens when enable bigalloc and inline data feature. As
> commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for
> bigalloc + inline. But it only resolved issue when has inline data, if
> inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
> before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
> i_data is still store inline data in this scene. Then will trigger UAF
> when find extent.
> To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
> in ext4_clu_mapped().
>
> Reported-by: [email protected]
> Fixes: 131294c35ed6 ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline")
> Signed-off-by: Ye Bin <[email protected]>
This also fixes the problem that I tried to address with the superficial
patch at
https://lore.kernel.org/linux-ext4/[email protected]/T/#t
Tested-by: Tudor Ambarus <[email protected]>
> ---
> fs/ext4/extents.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
> index 9de1c9d1a13d..ee5acf2bd5e6 100644
> --- a/fs/ext4/extents.c
> +++ b/fs/ext4/extents.c
> @@ -5802,7 +5802,8 @@ int ext4_clu_mapped(struct inode *inode, ext4_lblk_t lclu)
> * mapped - no physical clusters have been allocated, and the
> * file has no extents
> */
> - if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
> + if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) ||
> + ext4_has_inline_data(inode))
> return 0;
>
> /* search for the extent closest to the first block in the cluster */
On Wed 04-01-23 15:15:59, Ye Bin wrote:
> From: Ye Bin <[email protected]>
>
> Syzbot found the following issue:
> loop0: detected capacity change from 0 to 2048
> EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
> ==================================================================
> BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
> BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
> Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
>
> CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
> Call Trace:
> <TASK>
> __dump_stack lib/dump_stack.c:88 [inline]
> dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
> print_address_description+0x74/0x340 mm/kasan/report.c:306
> print_report+0x107/0x1f0 mm/kasan/report.c:417
> kasan_report+0xcd/0x100 mm/kasan/report.c:517
> ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
> ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
> ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
> ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
> ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
> ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
> ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
> ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
> generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
> ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
> ext4_file_write_iter+0x1d0/0x18f0
> call_write_iter include/linux/fs.h:2186 [inline]
> new_sync_write fs/read_write.c:491 [inline]
> vfs_write+0x7dc/0xc50 fs/read_write.c:584
> ksys_write+0x177/0x2a0 fs/read_write.c:637
> do_syscall_x64 arch/x86/entry/common.c:50 [inline]
> do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
> entry_SYSCALL_64_after_hwframe+0x63/0xcd
> RIP: 0033:0x7f4b7a9737b9
> RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
> RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
> RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
> RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
> R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> </TASK>
>
> Above issue is happens when enable bigalloc and inline data feature. As
> commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for
> bigalloc + inline. But it only resolved issue when has inline data, if
> inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
> before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
> i_data is still store inline data in this scene. Then will trigger UAF
> when find extent.
> To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
> in ext4_clu_mapped().
>
> Reported-by: [email protected]
> Fixes: 131294c35ed6 ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline")
> Signed-off-by: Ye Bin <[email protected]>
Looks good to me. Feel free to add:
Reviewed-by: Jan Kara <[email protected]>
Honza
> ---
> fs/ext4/extents.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
> index 9de1c9d1a13d..ee5acf2bd5e6 100644
> --- a/fs/ext4/extents.c
> +++ b/fs/ext4/extents.c
> @@ -5802,7 +5802,8 @@ int ext4_clu_mapped(struct inode *inode, ext4_lblk_t lclu)
> * mapped - no physical clusters have been allocated, and the
> * file has no extents
> */
> - if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
> + if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) ||
> + ext4_has_inline_data(inode))
> return 0;
>
> /* search for the extent closest to the first block in the cluster */
> --
> 2.31.1
>
--
Jan Kara <[email protected]>
SUSE Labs, CR
ping...
On 2023/1/4 15:15, Ye Bin wrote:
> From: Ye Bin <[email protected]>
>
> Syzbot found the following issue:
> loop0: detected capacity change from 0 to 2048
> EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
> ==================================================================
> BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
> BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
> Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
>
> CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
> Call Trace:
> <TASK>
> __dump_stack lib/dump_stack.c:88 [inline]
> dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
> print_address_description+0x74/0x340 mm/kasan/report.c:306
> print_report+0x107/0x1f0 mm/kasan/report.c:417
> kasan_report+0xcd/0x100 mm/kasan/report.c:517
> ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
> ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
> ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
> ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
> ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
> ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
> ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
> ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
> generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
> ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
> ext4_file_write_iter+0x1d0/0x18f0
> call_write_iter include/linux/fs.h:2186 [inline]
> new_sync_write fs/read_write.c:491 [inline]
> vfs_write+0x7dc/0xc50 fs/read_write.c:584
> ksys_write+0x177/0x2a0 fs/read_write.c:637
> do_syscall_x64 arch/x86/entry/common.c:50 [inline]
> do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
> entry_SYSCALL_64_after_hwframe+0x63/0xcd
> RIP: 0033:0x7f4b7a9737b9
> RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
> RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
> RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
> RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
> R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> </TASK>
>
> Above issue is happens when enable bigalloc and inline data feature. As
> commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for
> bigalloc + inline. But it only resolved issue when has inline data, if
> inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
> before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
> i_data is still store inline data in this scene. Then will trigger UAF
> when find extent.
> To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
> in ext4_clu_mapped().
>
> Reported-by: [email protected]
> Fixes: 131294c35ed6 ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline")
> Signed-off-by: Ye Bin <[email protected]>
> ---
> fs/ext4/extents.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
> index 9de1c9d1a13d..ee5acf2bd5e6 100644
> --- a/fs/ext4/extents.c
> +++ b/fs/ext4/extents.c
> @@ -5802,7 +5802,8 @@ int ext4_clu_mapped(struct inode *inode, ext4_lblk_t lclu)
> * mapped - no physical clusters have been allocated, and the
> * file has no extents
> */
> - if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
> + if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) ||
> + ext4_has_inline_data(inode))
> return 0;
>
> /* search for the extent closest to the first block in the cluster */