From: Valerie Clement Subject: Re: Performance degradation with FFSB between 2.6.20 and 2.6.21-rc7 Date: Thu, 19 Apr 2007 11:31:40 +0200 Message-ID: <462736FC.3090902@bull.net> References: <462622F8.10107@bull.net> <20070419090346.GE20928@kernel.dk> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------060808010809040907060001" Cc: ext4 development , Andrew Morton , Linux Kernel Mailing List To: Jens Axboe Return-path: Received: from ecfrec.frec.bull.fr ([129.183.4.8]:51068 "EHLO ecfrec.frec.bull.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1161482AbXDSJcg (ORCPT ); Thu, 19 Apr 2007 05:32:36 -0400 In-Reply-To: <20070419090346.GE20928@kernel.dk> Sender: linux-ext4-owner@vger.kernel.org List-Id: linux-ext4.vger.kernel.org This is a multi-part message in MIME format. --------------060808010809040907060001 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=ISO-8859-1; format=flowed Jens Axboe wrote: > Please tell me how you are running ffsb, and also please include a > dmessg from a booted system. > Hi, our mails crossed! please see my response to Andrew. You could reproduce the problem with dd command as suggested, it's more easy. I'm sending you the dmesg info. For my tests I used the scsci sdc device. Hope this help, Val?rie --------------060808010809040907060001 Content-Transfer-Encoding: 7bit Content-Type: text/plain; name="dmesg" Content-Disposition: inline; filename="dmesg" Linux version 2.6.21-rc7 (clementv@ext1) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Wed Apr 18 11:39:56 CEST 2007 Command line: console=ttyS0,57600n8 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b400 (usable) BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000cc000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff70000 (usable) BIOS-e820: 000000007ff70000 - 000000007ff7b000 (ACPI data) BIOS-e820: 000000007ff7b000 - 000000007ff80000 (ACPI NVS) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 155) 0 entries of 3200 used Entering add_active_range(0, 256, 524144) 1 entries of 3200 used end_pfn_map = 1047552 DMI 2.3 present. ACPI: RSDP 000F6940, 0014 (r0 PTLTD ) ACPI: RSDT 7FF766C5, 0034 (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP 7FF7AE94, 0074 (r1 INTEL LINDHRST 6040000 PTL 3) ACPI: DSDT 7FF766F9, 479B (r1 Intel LINDHRST 6040000 MSFT 100000E) ACPI: FACS 7FF7BFC0, 0040 ACPI: MCFG 7FF7AF08, 0040 (r1 PTLTD MCFG 6040000 LTP 0) ACPI: APIC 7FF7AF48, 0090 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 7FF7AFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) No NUMA configuration found Faking a node at 0000000000000000-000000007ff70000 Entering add_active_range(0, 0, 155) 0 entries of 3200 used Entering add_active_range(0, 256, 524144) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007ff70000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 155 0: 256 -> 524144 On node 0 totalpages: 524043 DMA zone: 56 pages used for memmap DMA zone: 1829 pages reserved DMA zone: 2110 pages, LIFO batch:0 DMA32 zone: 7110 pages used for memmap DMA32 zone: 512938 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 3, address 0xfec10000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009b000 - 000000000009c000 Nosave address range: 000000000009c000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000cc000 Nosave address range: 00000000000cc000 - 00000000000d8000 Nosave address range: 00000000000d8000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 37760 bytes of per cpu data Built 1 zonelists. Total pages: 515048 Kernel command line: console=ttyS0,57600n8 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2793.059 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Memory: 2056596k/2096576k available (3816k kernel code, 39576k reserved, 2214k data, 336k init) Calibrating delay using timer specific routine.. 5590.47 BogoMIPS (lpj=11180941) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12468955 Detected 12.468 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.51 BogoMIPS (lpj=11173033) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 1/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 2.80GHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: passed. SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 5586.49 BogoMIPS (lpj=11172997) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 2.80GHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#2]: passed. SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 5586.39 BogoMIPS (lpj=11172786) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 2.80GHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs migration_cost=3,906 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support. PCI: Using MMCONFIG at e0000000 - efffffff ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO 0000:00:1f.1: trying to change BAR0 from 0000 to 01F0 0000:00:1f.1: trying to change BAR1 from 0000 to 03F4 0000:00:1f.1: trying to change BAR2 from 0000 to 0170 0000:00:1f.1: trying to change BAR3 from 0000 to 0374 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:08:01.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2A._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3A._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs *9) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized libata version 2.20 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved Time: tsc clocksource has been installed. pnp: 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved pnp: 00:01: iomem range 0xfec81000-0xfec81fff has been reserved pnp: 00:01: iomem range 0xfec81400-0xfec823ff could not be reserved PCI: Bridge: 0000:01:00.0 IO window: 2000-3fff MEM window: d0100000-d01fffff PREFETCH window: 88000000-881fffff PCI: Bridge: 0000:01:00.2 IO window: 4000-4fff MEM window: d0200000-d02fffff PREFETCH window: 88200000-882fffff PCI: Bridge: 0000:00:02.0 IO window: 2000-4fff MEM window: d0100000-d02fffff PREFETCH window: 88000000-882fffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: 5000-5fff MEM window: d0300000-d03fffff PREFETCH window: d8000000-dfffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Setting latency timer of device 0000:01:00.2 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x3a set to 0x1 Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with large block/inode numbers, no debug enabled io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] PCI: Setting latency timer of device 0000:00:07.0 to 64 Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:02.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:04.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:05.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:06.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:07.0:pcie01 failed with error 2 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Processor [CPU3] (supports 8 throttling states) Real Time Clock Driver v1.12ac intel_rng: FWH not detected Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16 e1000: 0000:02:01.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0e:0c:6d:b2:98 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 16 (level, low) -> IRQ 16 e1000: 0000:03:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:0c:6d:b2:3f e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 25 (level, low) -> IRQ 25 e1000: 0000:08:02.0: e1000_probe: (PCI:66MHz:32-bit) 00:11:09:ab:d0:12 e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 26 (level, low) -> IRQ 26 e1000: 0000:08:03.0: e1000_probe: (PCI:66MHz:32-bit) 00:11:09:ab:d0:13 e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... Probing IDE interface ide1... hdc: LITE-ON COMBO SOHC-4832K, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 18 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs scsi 0:0:0:0: Direct-Access MAXTOR ATLAS10K5_73SCA JNZ3 PQ: 0 ANSI: 3 target0:0:0: asynchronous scsi0:A:0:0: Tagged Queuing enabled. Depth 32 target0:0:0: Beginning Domain Validation target0:0:0: wide asynchronous target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127) target0:0:0: Ending Domain Validation scsi 0:0:1:0: Direct-Access MAXTOR ATLAS10K5_73SCA JNZ3 PQ: 0 ANSI: 3 target0:0:1: asynchronous scsi0:A:1:0: Tagged Queuing enabled. Depth 32 target0:0:1: Beginning Domain Validation target0:0:1: wide asynchronous target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127) target0:0:1: Ending Domain Validation scsi 0:0:2:0: Direct-Access MAXTOR ATLAS10K4_73SCA DFV0 PQ: 0 ANSI: 3 target0:0:2: asynchronous scsi0:A:2:0: Tagged Queuing enabled. Depth 32 target0:0:2: Beginning Domain Validation target0:0:2: wide asynchronous target0:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127) target0:0:2: Ending Domain Validation scsi 0:0:3:0: Direct-Access MAXTOR ATLAS10K5_73SCA JNZ3 PQ: 0 ANSI: 3 target0:0:3: asynchronous scsi0:A:3:0: Tagged Queuing enabled. Depth 32 target0:0:3: Beginning Domain Validation target0:0:3: wide asynchronous target0:0:3: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127) target0:0:3: Ending Domain Validation scsi 0:0:8:0: Processor NEC GEM318 0 PQ: 0 ANSI: 2 target0:0:8: asynchronous target0:0:8: Beginning Domain Validation target0:0:8: Ending Domain Validation ACPI: PCI Interrupt 0000:02:03.1[B] -> GSI 19 (level, low) -> IRQ 19 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.10-rc1 Wed Feb 14 10:14:25 PST 2007 SCSI device sda: 142969680 512-byte hdwr sectors (73200 MB) sda: Write Protect is off sda: Mode Sense: bf 00 10 08 SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA SCSI device sda: 142969680 512-byte hdwr sectors (73200 MB) sda: Write Protect is off sda: Mode Sense: bf 00 10 08 SCSI device sda: write cache: disabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 142969680 512-byte hdwr sectors (73200 MB) sdb: Write Protect is off sdb: Mode Sense: bf 00 10 08 SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA SCSI device sdb: 142969680 512-byte hdwr sectors (73200 MB) sdb: Write Protect is off sdb: Mode Sense: bf 00 10 08 SCSI device sdb: write cache: disabled, read cache: enabled, supports DPO and FUA sdb: sdb1 sd 0:0:1:0: Attached scsi disk sdb SCSI device sdc: 142969680 512-byte hdwr sectors (73200 MB) sdc: Write Protect is off sdc: Mode Sense: fd 00 10 08 SCSI device sdc: write cache: disabled, read cache: enabled, supports DPO and FUA SCSI device sdc: 142969680 512-byte hdwr sectors (73200 MB) sdc: Write Protect is off sdc: Mode Sense: fd 00 10 08 SCSI device sdc: write cache: disabled, read cache: enabled, supports DPO and FUA sdc: unknown partition table sd 0:0:2:0: Attached scsi disk sdc SCSI device sdd: 142969680 512-byte hdwr sectors (73200 MB) sdd: Write Protect is off sdd: Mode Sense: bf 00 10 08 SCSI device sdd: write cache: disabled, read cache: enabled, supports DPO and FUA SCSI device sdd: 142969680 512-byte hdwr sectors (73200 MB) sdd: Write Protect is off sdd: Mode Sense: bf 00 10 08 SCSI device sdd: write cache: disabled, read cache: enabled, supports DPO and FUA sdd: unknown partition table sd 0:0:3:0: Attached scsi disk sdd sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 sd 0:0:2:0: Attached scsi generic sg2 type 0 sd 0:0:3:0: Attached scsi generic sg3 type 0 scsi 0:0:8:0: Attached scsi generic sg4 type 3 Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.04 Fusion MPT SAS Host driver 3.04.04 ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0001400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usbcore: registered new interface driver usblp /home/clementv/src/linux-2.6.21-rc7/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbhid /home/clementv/src/linux-2.6.21-rc7/drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 md: linear personality registered for level -1 md: raid0 personality registered for level 0 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Intel 810 + AC97 Audio, version 1.01, 11:37:55 Apr 18 2007 oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 336k freed Adding 6024332k swap on /dev/sda7. Priority:-1 extents:1 across:6024332k md: md0 stopped. QLogic Fibre Channel HBA Driver ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 16 qla2xxx 0000:02:02.0: Found an ISP2312, irq 16, iobase 0xffffc20000016000 qla2xxx 0000:02:02.0: Configuring PCI space... qla2xxx 0000:02:02.0: Configure NVRAM parameters... qla2xxx 0000:02:02.0: Verifying loaded RISC code... qla2xxx 0000:02:02.0: Allocated (412 KB) for firmware dump... scsi2 : qla2xxx qla2xxx 0000:02:02.0: LIP reset occured (f8f7). qla2xxx 0000:02:02.0: LIP occured (f8f7). qla2xxx 0000:02:02.0: LOOP UP detected (2 Gbps). scsi 2:0:0:0: Direct-Access IBM 1724-100 FAStT 0542 PQ: 0 ANSI: 3 SCSI device sde: 4269790986 512-byte hdwr sectors (2186133 MB) qla2xxx 0000:02:02.0: QLogic Fibre Channel HBA Driver: 8.01.07-k5 QLogic QLA2340 - 133MHz PCI-X to 2Gb FC, Single Channel ISP2312: PCI-X (100 MHz) @ 0000:02:02.0 hdma-, host#=2, fw=3.03.20 IPX sde: Write Protect is off sde: Mode Sense: 77 00 10 08 SCSI device sde: write cache: enabled, read cache: enabled, supports DPO and FUA SCSI device sde: 4269790986 512-byte hdwr sectors (2186133 MB) sde: Write Protect is off sde: Mode Sense: 77 00 10 08 SCSI device sde: write cache: enabled, read cache: enabled, supports DPO and FUA sde: unknown partition table sd 2:0:0:0: Attached scsi disk sde sd 2:0:0:0: Attached scsi generic sg5 type 0 scsi 2:0:0:1: Direct-Access IBM 1724-100 FAStT 0542 PQ: 0 ANSI: 3 SCSI device sdf: 4269790986 512-byte hdwr sectors (2186133 MB) sdf: Write Protect is off sdf: Mode Sense: 77 00 10 08 SCSI device sdf: write cache: enabled, read cache: enabled, supports DPO and FUA SCSI device sdf: 4269790986 512-byte hdwr sectors (2186133 MB) sdf: Write Protect is off sdf: Mode Sense: 77 00 10 08 SCSI device sdf: write cache: enabled, read cache: enabled, supports DPO and FUA sdf: unknown partition table sd 2:0:0:1: Attached scsi disk sdf sd 2:0:0:1: Attached scsi generic sg6 type 0 scsi 2:0:0:2: Direct-Access IBM 1724-100 FAStT 0542 PQ: 0 ANSI: 3 SCSI device sdg: 2385539072 512-byte hdwr sectors (1221396 MB) sdg: Write Protect is off sdg: Mode Sense: 77 00 10 08 SCSI device sdg: write cache: enabled, read cache: enabled, supports DPO and FUA SCSI device sdg: 2385539072 512-byte hdwr sectors (1221396 MB) sdg: Write Protect is off sdg: Mode Sense: 77 00 10 08 SCSI device sdg: write cache: enabled, read cache: enabled, supports DPO and FUA sdg: unknown partition table sd 2:0:0:2: Attached scsi disk sdg sd 2:0:0:2: Attached scsi generic sg7 type 0 scsi 2:0:0:31: Direct-Access IBM Universal Xport 0542 PQ: 0 ANSI: 3 scsi 2:0:0:31: Attached scsi generic sg8 type 0 e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX XFS mounting filesystem sdc Ending clean XFS mount for filesystem: sdc --------------060808010809040907060001--