From: "Theodore Ts'o" Subject: [PATCH, RFC] ext3: move headers out of include/linux Date: Thu, 01 May 2008 10:40:37 -0400 Message-ID: Cc: linux-kernel@vger.kernel.org, linux-ext4@vger.kernel.org To: Christoph Hellwig , torvalds@linux-foundation.org Return-path: Sender: linux-kernel-owner@vger.kernel.org List-Id: linux-ext4.vger.kernel.org Move ext3 headers out of include/linux. Cristoph promised to do this once the ext4 patch was accepted, but I figured I'd do him a favor and and do it for him. :-) People are angsting heavily over patches not going through linux-next or -mm first on LKML at the moment, but this is a simple patch (just moving header files around and adjusting #include's), so I'd like to get a sense if this is something Linus would accept at this point. It would be nice to keep ext3 and ext4 in synch as much as possible, but it's not the end of the world if this misses the merge window and we don't do this until 2.6.27's merge window. Secondly, Christoph, was there a reason why you didn't unpublish ext2_fs.h when you unpublished ext3_fs.h? Are there a significant number of userspace prorams using it? I don't care, because e2fsprogs doesn't use it, and as far as I'm concerned I'd much rather encourage people to use ext2fs/ext2_fs.h from e2fsprogs instead. And this would allow us to do a similar patch for fs/ext2; but assume you had found some significant number of applications that would break if we unexported and moved linux/ext2_fs.h? Cc: Christoph Hellwig Signed-off-by: "Theodore Ts'o" --- fs/ext3/acl.c | 4 +- fs/ext3/balloc.c | 5 +- fs/ext3/bitmap.c | 2 +- fs/ext3/dir.c | 3 +- fs/ext3/ext3.h | 897 ++++++++++++++++++++++++++++++++++++++++++++ fs/ext3/ext3_i.h | 147 ++++++++ fs/ext3/ext3_jbd.c | 7 +- fs/ext3/ext3_jbd.h | 225 +++++++++++ fs/ext3/ext3_sb.h | 86 +++++ fs/ext3/file.c | 5 +- fs/ext3/fsync.c | 5 +- fs/ext3/hash.c | 3 +- fs/ext3/ialloc.c | 5 +- fs/ext3/inode.c | 4 +- fs/ext3/ioctl.c | 5 +- fs/ext3/namei.c | 5 +- fs/ext3/resize.c | 6 +- fs/ext3/super.c | 5 +- fs/ext3/symlink.c | 3 +- fs/ext3/xattr.c | 4 +- fs/ext3/xattr_security.c | 4 +- fs/ext3/xattr_trusted.c | 4 +- fs/ext3/xattr_user.c | 5 +- include/linux/ext3_fs.h | 896 ------------------------------------------- include/linux/ext3_fs_i.h | 147 -------- include/linux/ext3_fs_sb.h | 86 ----- include/linux/ext3_jbd.h | 226 ----------- 27 files changed, 1395 insertions(+), 1399 deletions(-) create mode 100644 fs/ext3/ext3.h create mode 100644 fs/ext3/ext3_i.h create mode 100644 fs/ext3/ext3_jbd.h create mode 100644 fs/ext3/ext3_sb.h delete mode 100644 include/linux/ext3_fs.h delete mode 100644 include/linux/ext3_fs_i.h delete mode 100644 include/linux/ext3_fs_sb.h delete mode 100644 include/linux/ext3_jbd.h diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c index a754d18..82e90dd 100644 --- a/fs/ext3/acl.c +++ b/fs/ext3/acl.c @@ -9,8 +9,8 @@ #include #include #include -#include -#include +#include "ext3.h" +#include "ext3_jbd.h" #include "xattr.h" #include "acl.h" diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c index 92fd033..1905a56 100644 --- a/fs/ext3/balloc.c +++ b/fs/ext3/balloc.c @@ -14,11 +14,10 @@ #include #include #include -#include -#include -#include #include #include +#include "ext3.h" +#include "ext3_jbd.h" /* * balloc.c contains the blocks allocation and deallocation routines diff --git a/fs/ext3/bitmap.c b/fs/ext3/bitmap.c index 6afc39d..aff8a6f 100644 --- a/fs/ext3/bitmap.c +++ b/fs/ext3/bitmap.c @@ -9,7 +9,7 @@ #include #include -#include +#include "ext3.h" #ifdef EXT3FS_DEBUG diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c index 8ca3bfd..4462774 100644 --- a/fs/ext3/dir.c +++ b/fs/ext3/dir.c @@ -22,11 +22,10 @@ */ #include -#include -#include #include #include #include +#include "ext3.h" static unsigned char ext3_filetype_table[] = { DT_UNKNOWN, DT_REG, DT_DIR, DT_CHR, DT_BLK, DT_FIFO, DT_SOCK, DT_LNK diff --git a/fs/ext3/ext3.h b/fs/ext3/ext3.h new file mode 100644 index 0000000..ac02b7f --- /dev/null +++ b/fs/ext3/ext3.h @@ -0,0 +1,897 @@ +/* + * ext3.h + * + * Copyright (C) 1992, 1993, 1994, 1995 + * Remy Card (card@masi.ibp.fr) + * Laboratoire MASI - Institut Blaise Pascal + * Universite Pierre et Marie Curie (Paris VI) + * + * from + * + * linux/include/linux/minix_fs.h + * + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +#ifndef _LINUX_EXT3_FS_H +#define _LINUX_EXT3_FS_H + +#include +#include +#include + +/* + * The second extended filesystem constants/structures + */ + +/* + * Define EXT3FS_DEBUG to produce debug messages + */ +#undef EXT3FS_DEBUG + +/* + * Define EXT3_RESERVATION to reserve data blocks for expanding files + */ +#define EXT3_DEFAULT_RESERVE_BLOCKS 8 +/*max window size: 1024(direct blocks) + 3([t,d]indirect blocks) */ +#define EXT3_MAX_RESERVE_BLOCKS 1027 +#define EXT3_RESERVE_WINDOW_NOT_ALLOCATED 0 + +/* + * Debug code + */ +#ifdef EXT3FS_DEBUG +#define ext3_debug(f, a...) \ + do { \ + printk (KERN_DEBUG "EXT3-fs DEBUG (%s, %d): %s:", \ + __FILE__, __LINE__, __FUNCTION__); \ + printk (KERN_DEBUG f, ## a); \ + } while (0) +#else +#define ext3_debug(f, a...) do {} while (0) +#endif + +/* + * Special inodes numbers + */ +#define EXT3_BAD_INO 1 /* Bad blocks inode */ +#define EXT3_ROOT_INO 2 /* Root inode */ +#define EXT3_BOOT_LOADER_INO 5 /* Boot loader inode */ +#define EXT3_UNDEL_DIR_INO 6 /* Undelete directory inode */ +#define EXT3_RESIZE_INO 7 /* Reserved group descriptors inode */ +#define EXT3_JOURNAL_INO 8 /* Journal inode */ + +/* First non-reserved inode for old ext3 filesystems */ +#define EXT3_GOOD_OLD_FIRST_INO 11 + +/* + * Maximal count of links to a file + */ +#define EXT3_LINK_MAX 32000 + +/* + * Macro-instructions used to manage several block sizes + */ +#define EXT3_MIN_BLOCK_SIZE 1024 +#define EXT3_MAX_BLOCK_SIZE 65536 +#define EXT3_MIN_BLOCK_LOG_SIZE 10 +#ifdef __KERNEL__ +# define EXT3_BLOCK_SIZE(s) ((s)->s_blocksize) +#else +# define EXT3_BLOCK_SIZE(s) (EXT3_MIN_BLOCK_SIZE << (s)->s_log_block_size) +#endif +#define EXT3_ADDR_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (__u32)) +#ifdef __KERNEL__ +# define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits) +#else +# define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10) +#endif +#ifdef __KERNEL__ +#define EXT3_ADDR_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_addr_per_block_bits) +#define EXT3_INODE_SIZE(s) (EXT3_SB(s)->s_inode_size) +#define EXT3_FIRST_INO(s) (EXT3_SB(s)->s_first_ino) +#else +#define EXT3_INODE_SIZE(s) (((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \ + EXT3_GOOD_OLD_INODE_SIZE : \ + (s)->s_inode_size) +#define EXT3_FIRST_INO(s) (((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \ + EXT3_GOOD_OLD_FIRST_INO : \ + (s)->s_first_ino) +#endif + +/* + * Macro-instructions used to manage fragments + */ +#define EXT3_MIN_FRAG_SIZE 1024 +#define EXT3_MAX_FRAG_SIZE 4096 +#define EXT3_MIN_FRAG_LOG_SIZE 10 +#ifdef __KERNEL__ +# define EXT3_FRAG_SIZE(s) (EXT3_SB(s)->s_frag_size) +# define EXT3_FRAGS_PER_BLOCK(s) (EXT3_SB(s)->s_frags_per_block) +#else +# define EXT3_FRAG_SIZE(s) (EXT3_MIN_FRAG_SIZE << (s)->s_log_frag_size) +# define EXT3_FRAGS_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / EXT3_FRAG_SIZE(s)) +#endif + +/* + * Structure of a blocks group descriptor + */ +struct ext3_group_desc +{ + __le32 bg_block_bitmap; /* Blocks bitmap block */ + __le32 bg_inode_bitmap; /* Inodes bitmap block */ + __le32 bg_inode_table; /* Inodes table block */ + __le16 bg_free_blocks_count; /* Free blocks count */ + __le16 bg_free_inodes_count; /* Free inodes count */ + __le16 bg_used_dirs_count; /* Directories count */ + __u16 bg_pad; + __le32 bg_reserved[3]; +}; + +/* + * Macro-instructions used to manage group descriptors + */ +#ifdef __KERNEL__ +# define EXT3_BLOCKS_PER_GROUP(s) (EXT3_SB(s)->s_blocks_per_group) +# define EXT3_DESC_PER_BLOCK(s) (EXT3_SB(s)->s_desc_per_block) +# define EXT3_INODES_PER_GROUP(s) (EXT3_SB(s)->s_inodes_per_group) +# define EXT3_DESC_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_desc_per_block_bits) +#else +# define EXT3_BLOCKS_PER_GROUP(s) ((s)->s_blocks_per_group) +# define EXT3_DESC_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (struct ext3_group_desc)) +# define EXT3_INODES_PER_GROUP(s) ((s)->s_inodes_per_group) +#endif + +/* + * Constants relative to the data blocks + */ +#define EXT3_NDIR_BLOCKS 12 +#define EXT3_IND_BLOCK EXT3_NDIR_BLOCKS +#define EXT3_DIND_BLOCK (EXT3_IND_BLOCK + 1) +#define EXT3_TIND_BLOCK (EXT3_DIND_BLOCK + 1) +#define EXT3_N_BLOCKS (EXT3_TIND_BLOCK + 1) + +/* + * Inode flags + */ +#define EXT3_SECRM_FL 0x00000001 /* Secure deletion */ +#define EXT3_UNRM_FL 0x00000002 /* Undelete */ +#define EXT3_COMPR_FL 0x00000004 /* Compress file */ +#define EXT3_SYNC_FL 0x00000008 /* Synchronous updates */ +#define EXT3_IMMUTABLE_FL 0x00000010 /* Immutable file */ +#define EXT3_APPEND_FL 0x00000020 /* writes to file may only append */ +#define EXT3_NODUMP_FL 0x00000040 /* do not dump file */ +#define EXT3_NOATIME_FL 0x00000080 /* do not update atime */ +/* Reserved for compression usage... */ +#define EXT3_DIRTY_FL 0x00000100 +#define EXT3_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ +#define EXT3_NOCOMPR_FL 0x00000400 /* Don't compress */ +#define EXT3_ECOMPR_FL 0x00000800 /* Compression error */ +/* End compression flags --- maybe not all used */ +#define EXT3_INDEX_FL 0x00001000 /* hash-indexed directory */ +#define EXT3_IMAGIC_FL 0x00002000 /* AFS directory */ +#define EXT3_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */ +#define EXT3_NOTAIL_FL 0x00008000 /* file tail should not be merged */ +#define EXT3_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ +#define EXT3_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ +#define EXT3_RESERVED_FL 0x80000000 /* reserved for ext3 lib */ + +#define EXT3_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ +#define EXT3_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ + +/* + * Inode dynamic state flags + */ +#define EXT3_STATE_JDATA 0x00000001 /* journaled data exists */ +#define EXT3_STATE_NEW 0x00000002 /* inode is newly created */ +#define EXT3_STATE_XATTR 0x00000004 /* has in-inode xattrs */ + +/* Used to pass group descriptor data when online resize is done */ +struct ext3_new_group_input { + __u32 group; /* Group number for this data */ + __u32 block_bitmap; /* Absolute block number of block bitmap */ + __u32 inode_bitmap; /* Absolute block number of inode bitmap */ + __u32 inode_table; /* Absolute block number of inode table start */ + __u32 blocks_count; /* Total number of blocks in this group */ + __u16 reserved_blocks; /* Number of reserved blocks in this group */ + __u16 unused; +}; + +/* The struct ext3_new_group_input in kernel space, with free_blocks_count */ +struct ext3_new_group_data { + __u32 group; + __u32 block_bitmap; + __u32 inode_bitmap; + __u32 inode_table; + __u32 blocks_count; + __u16 reserved_blocks; + __u16 unused; + __u32 free_blocks_count; +}; + + +/* + * ioctl commands + */ +#define EXT3_IOC_GETFLAGS FS_IOC_GETFLAGS +#define EXT3_IOC_SETFLAGS FS_IOC_SETFLAGS +#define EXT3_IOC_GETVERSION _IOR('f', 3, long) +#define EXT3_IOC_SETVERSION _IOW('f', 4, long) +#define EXT3_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long) +#define EXT3_IOC_GROUP_ADD _IOW('f', 8,struct ext3_new_group_input) +#define EXT3_IOC_GETVERSION_OLD FS_IOC_GETVERSION +#define EXT3_IOC_SETVERSION_OLD FS_IOC_SETVERSION +#ifdef CONFIG_JBD_DEBUG +#define EXT3_IOC_WAIT_FOR_READONLY _IOR('f', 99, long) +#endif +#define EXT3_IOC_GETRSVSZ _IOR('f', 5, long) +#define EXT3_IOC_SETRSVSZ _IOW('f', 6, long) + +/* + * ioctl commands in 32 bit emulation + */ +#define EXT3_IOC32_GETFLAGS FS_IOC32_GETFLAGS +#define EXT3_IOC32_SETFLAGS FS_IOC32_SETFLAGS +#define EXT3_IOC32_GETVERSION _IOR('f', 3, int) +#define EXT3_IOC32_SETVERSION _IOW('f', 4, int) +#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int) +#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int) +#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int) +#ifdef CONFIG_JBD_DEBUG +#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int) +#endif +#define EXT3_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION +#define EXT3_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION + + +/* + * Mount options + */ +struct ext3_mount_options { + unsigned long s_mount_opt; + uid_t s_resuid; + gid_t s_resgid; + unsigned long s_commit_interval; +#ifdef CONFIG_QUOTA + int s_jquota_fmt; + char *s_qf_names[MAXQUOTAS]; +#endif +}; + +/* + * Structure of an inode on the disk + */ +struct ext3_inode { + __le16 i_mode; /* File mode */ + __le16 i_uid; /* Low 16 bits of Owner Uid */ + __le32 i_size; /* Size in bytes */ + __le32 i_atime; /* Access time */ + __le32 i_ctime; /* Creation time */ + __le32 i_mtime; /* Modification time */ + __le32 i_dtime; /* Deletion Time */ + __le16 i_gid; /* Low 16 bits of Group Id */ + __le16 i_links_count; /* Links count */ + __le32 i_blocks; /* Blocks count */ + __le32 i_flags; /* File flags */ + union { + struct { + __u32 l_i_reserved1; + } linux1; + struct { + __u32 h_i_translator; + } hurd1; + struct { + __u32 m_i_reserved1; + } masix1; + } osd1; /* OS dependent 1 */ + __le32 i_block[EXT3_N_BLOCKS];/* Pointers to blocks */ + __le32 i_generation; /* File version (for NFS) */ + __le32 i_file_acl; /* File ACL */ + __le32 i_dir_acl; /* Directory ACL */ + __le32 i_faddr; /* Fragment address */ + union { + struct { + __u8 l_i_frag; /* Fragment number */ + __u8 l_i_fsize; /* Fragment size */ + __u16 i_pad1; + __le16 l_i_uid_high; /* these 2 fields */ + __le16 l_i_gid_high; /* were reserved2[0] */ + __u32 l_i_reserved2; + } linux2; + struct { + __u8 h_i_frag; /* Fragment number */ + __u8 h_i_fsize; /* Fragment size */ + __u16 h_i_mode_high; + __u16 h_i_uid_high; + __u16 h_i_gid_high; + __u32 h_i_author; + } hurd2; + struct { + __u8 m_i_frag; /* Fragment number */ + __u8 m_i_fsize; /* Fragment size */ + __u16 m_pad1; + __u32 m_i_reserved2[2]; + } masix2; + } osd2; /* OS dependent 2 */ + __le16 i_extra_isize; + __le16 i_pad1; +}; + +#define i_size_high i_dir_acl + +#if defined(__KERNEL__) || defined(__linux__) +#define i_reserved1 osd1.linux1.l_i_reserved1 +#define i_frag osd2.linux2.l_i_frag +#define i_fsize osd2.linux2.l_i_fsize +#define i_uid_low i_uid +#define i_gid_low i_gid +#define i_uid_high osd2.linux2.l_i_uid_high +#define i_gid_high osd2.linux2.l_i_gid_high +#define i_reserved2 osd2.linux2.l_i_reserved2 + +#elif defined(__GNU__) + +#define i_translator osd1.hurd1.h_i_translator +#define i_frag osd2.hurd2.h_i_frag; +#define i_fsize osd2.hurd2.h_i_fsize; +#define i_uid_high osd2.hurd2.h_i_uid_high +#define i_gid_high osd2.hurd2.h_i_gid_high +#define i_author osd2.hurd2.h_i_author + +#elif defined(__masix__) + +#define i_reserved1 osd1.masix1.m_i_reserved1 +#define i_frag osd2.masix2.m_i_frag +#define i_fsize osd2.masix2.m_i_fsize +#define i_reserved2 osd2.masix2.m_i_reserved2 + +#endif /* defined(__KERNEL__) || defined(__linux__) */ + +/* + * File system states + */ +#define EXT3_VALID_FS 0x0001 /* Unmounted cleanly */ +#define EXT3_ERROR_FS 0x0002 /* Errors detected */ +#define EXT3_ORPHAN_FS 0x0004 /* Orphans being recovered */ + +/* + * Mount flags + */ +#define EXT3_MOUNT_CHECK 0x00001 /* Do mount-time checks */ +#define EXT3_MOUNT_OLDALLOC 0x00002 /* Don't use the new Orlov allocator */ +#define EXT3_MOUNT_GRPID 0x00004 /* Create files with directory's group */ +#define EXT3_MOUNT_DEBUG 0x00008 /* Some debugging messages */ +#define EXT3_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */ +#define EXT3_MOUNT_ERRORS_RO 0x00020 /* Remount fs ro on errors */ +#define EXT3_MOUNT_ERRORS_PANIC 0x00040 /* Panic on errors */ +#define EXT3_MOUNT_MINIX_DF 0x00080 /* Mimics the Minix statfs */ +#define EXT3_MOUNT_NOLOAD 0x00100 /* Don't use existing journal*/ +#define EXT3_MOUNT_ABORT 0x00200 /* Fatal error detected */ +#define EXT3_MOUNT_DATA_FLAGS 0x00C00 /* Mode for data writes: */ +#define EXT3_MOUNT_JOURNAL_DATA 0x00400 /* Write data to journal */ +#define EXT3_MOUNT_ORDERED_DATA 0x00800 /* Flush data before commit */ +#define EXT3_MOUNT_WRITEBACK_DATA 0x00C00 /* No data ordering */ +#define EXT3_MOUNT_UPDATE_JOURNAL 0x01000 /* Update the journal format */ +#define EXT3_MOUNT_NO_UID32 0x02000 /* Disable 32-bit UIDs */ +#define EXT3_MOUNT_XATTR_USER 0x04000 /* Extended user attributes */ +#define EXT3_MOUNT_POSIX_ACL 0x08000 /* POSIX Access Control Lists */ +#define EXT3_MOUNT_RESERVATION 0x10000 /* Preallocation */ +#define EXT3_MOUNT_BARRIER 0x20000 /* Use block barriers */ +#define EXT3_MOUNT_NOBH 0x40000 /* No bufferheads */ +#define EXT3_MOUNT_QUOTA 0x80000 /* Some quota option set */ +#define EXT3_MOUNT_USRQUOTA 0x100000 /* "old" user quota */ +#define EXT3_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */ + +/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */ +#ifndef _LINUX_EXT2_FS_H +#define clear_opt(o, opt) o &= ~EXT3_MOUNT_##opt +#define set_opt(o, opt) o |= EXT3_MOUNT_##opt +#define test_opt(sb, opt) (EXT3_SB(sb)->s_mount_opt & \ + EXT3_MOUNT_##opt) +#else +#define EXT2_MOUNT_NOLOAD EXT3_MOUNT_NOLOAD +#define EXT2_MOUNT_ABORT EXT3_MOUNT_ABORT +#define EXT2_MOUNT_DATA_FLAGS EXT3_MOUNT_DATA_FLAGS +#endif + +#define ext3_set_bit ext2_set_bit +#define ext3_set_bit_atomic ext2_set_bit_atomic +#define ext3_clear_bit ext2_clear_bit +#define ext3_clear_bit_atomic ext2_clear_bit_atomic +#define ext3_test_bit ext2_test_bit +#define ext3_find_first_zero_bit ext2_find_first_zero_bit +#define ext3_find_next_zero_bit ext2_find_next_zero_bit + +/* + * Maximal mount counts between two filesystem checks + */ +#define EXT3_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */ +#define EXT3_DFL_CHECKINTERVAL 0 /* Don't use interval check */ + +/* + * Behaviour when detecting errors + */ +#define EXT3_ERRORS_CONTINUE 1 /* Continue execution */ +#define EXT3_ERRORS_RO 2 /* Remount fs read-only */ +#define EXT3_ERRORS_PANIC 3 /* Panic */ +#define EXT3_ERRORS_DEFAULT EXT3_ERRORS_CONTINUE + +/* + * Structure of the super block + */ +struct ext3_super_block { +/*00*/ __le32 s_inodes_count; /* Inodes count */ + __le32 s_blocks_count; /* Blocks count */ + __le32 s_r_blocks_count; /* Reserved blocks count */ + __le32 s_free_blocks_count; /* Free blocks count */ +/*10*/ __le32 s_free_inodes_count; /* Free inodes count */ + __le32 s_first_data_block; /* First Data Block */ + __le32 s_log_block_size; /* Block size */ + __le32 s_log_frag_size; /* Fragment size */ +/*20*/ __le32 s_blocks_per_group; /* # Blocks per group */ + __le32 s_frags_per_group; /* # Fragments per group */ + __le32 s_inodes_per_group; /* # Inodes per group */ + __le32 s_mtime; /* Mount time */ +/*30*/ __le32 s_wtime; /* Write time */ + __le16 s_mnt_count; /* Mount count */ + __le16 s_max_mnt_count; /* Maximal mount count */ + __le16 s_magic; /* Magic signature */ + __le16 s_state; /* File system state */ + __le16 s_errors; /* Behaviour when detecting errors */ + __le16 s_minor_rev_level; /* minor revision level */ +/*40*/ __le32 s_lastcheck; /* time of last check */ + __le32 s_checkinterval; /* max. time between checks */ + __le32 s_creator_os; /* OS */ + __le32 s_rev_level; /* Revision level */ +/*50*/ __le16 s_def_resuid; /* Default uid for reserved blocks */ + __le16 s_def_resgid; /* Default gid for reserved blocks */ + /* + * These fields are for EXT3_DYNAMIC_REV superblocks only. + * + * Note: the difference between the compatible feature set and + * the incompatible feature set is that if there is a bit set + * in the incompatible feature set that the kernel doesn't + * know about, it should refuse to mount the filesystem. + * + * e2fsck's requirements are more strict; if it doesn't know + * about a feature in either the compatible or incompatible + * feature set, it must abort and not try to meddle with + * things it doesn't understand... + */ + __le32 s_first_ino; /* First non-reserved inode */ + __le16 s_inode_size; /* size of inode structure */ + __le16 s_block_group_nr; /* block group # of this superblock */ + __le32 s_feature_compat; /* compatible feature set */ +/*60*/ __le32 s_feature_incompat; /* incompatible feature set */ + __le32 s_feature_ro_compat; /* readonly-compatible feature set */ +/*68*/ __u8 s_uuid[16]; /* 128-bit uuid for volume */ +/*78*/ char s_volume_name[16]; /* volume name */ +/*88*/ char s_last_mounted[64]; /* directory where last mounted */ +/*C8*/ __le32 s_algorithm_usage_bitmap; /* For compression */ + /* + * Performance hints. Directory preallocation should only + * happen if the EXT3_FEATURE_COMPAT_DIR_PREALLOC flag is on. + */ + __u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/ + __u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */ + __le16 s_reserved_gdt_blocks; /* Per group desc for online growth */ + /* + * Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set. + */ +/*D0*/ __u8 s_journal_uuid[16]; /* uuid of journal superblock */ +/*E0*/ __le32 s_journal_inum; /* inode number of journal file */ + __le32 s_journal_dev; /* device number of journal file */ + __le32 s_last_orphan; /* start of list of inodes to delete */ + __le32 s_hash_seed[4]; /* HTREE hash seed */ + __u8 s_def_hash_version; /* Default hash version to use */ + __u8 s_reserved_char_pad; + __u16 s_reserved_word_pad; + __le32 s_default_mount_opts; + __le32 s_first_meta_bg; /* First metablock block group */ + __u32 s_reserved[190]; /* Padding to the end of the block */ +}; + +#ifdef __KERNEL__ +#include "ext3_i.h" +#include "ext3_sb.h" +static inline struct ext3_sb_info * EXT3_SB(struct super_block *sb) +{ + return sb->s_fs_info; +} +static inline struct ext3_inode_info *EXT3_I(struct inode *inode) +{ + return container_of(inode, struct ext3_inode_info, vfs_inode); +} + +static inline int ext3_valid_inum(struct super_block *sb, unsigned long ino) +{ + return ino == EXT3_ROOT_INO || + ino == EXT3_JOURNAL_INO || + ino == EXT3_RESIZE_INO || + (ino >= EXT3_FIRST_INO(sb) && + ino <= le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)); +} +#else +/* Assume that user mode programs are passing in an ext3fs superblock, not + * a kernel struct super_block. This will allow us to call the feature-test + * macros from user land. */ +#define EXT3_SB(sb) (sb) +#endif + +#define NEXT_ORPHAN(inode) EXT3_I(inode)->i_dtime + +/* + * Codes for operating systems + */ +#define EXT3_OS_LINUX 0 +#define EXT3_OS_HURD 1 +#define EXT3_OS_MASIX 2 +#define EXT3_OS_FREEBSD 3 +#define EXT3_OS_LITES 4 + +/* + * Revision levels + */ +#define EXT3_GOOD_OLD_REV 0 /* The good old (original) format */ +#define EXT3_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */ + +#define EXT3_CURRENT_REV EXT3_GOOD_OLD_REV +#define EXT3_MAX_SUPP_REV EXT3_DYNAMIC_REV + +#define EXT3_GOOD_OLD_INODE_SIZE 128 + +/* + * Feature set definitions + */ + +#define EXT3_HAS_COMPAT_FEATURE(sb,mask) \ + ( EXT3_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) ) +#define EXT3_HAS_RO_COMPAT_FEATURE(sb,mask) \ + ( EXT3_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) ) +#define EXT3_HAS_INCOMPAT_FEATURE(sb,mask) \ + ( EXT3_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) ) +#define EXT3_SET_COMPAT_FEATURE(sb,mask) \ + EXT3_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask) +#define EXT3_SET_RO_COMPAT_FEATURE(sb,mask) \ + EXT3_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask) +#define EXT3_SET_INCOMPAT_FEATURE(sb,mask) \ + EXT3_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask) +#define EXT3_CLEAR_COMPAT_FEATURE(sb,mask) \ + EXT3_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask) +#define EXT3_CLEAR_RO_COMPAT_FEATURE(sb,mask) \ + EXT3_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask) +#define EXT3_CLEAR_INCOMPAT_FEATURE(sb,mask) \ + EXT3_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask) + +#define EXT3_FEATURE_COMPAT_DIR_PREALLOC 0x0001 +#define EXT3_FEATURE_COMPAT_IMAGIC_INODES 0x0002 +#define EXT3_FEATURE_COMPAT_HAS_JOURNAL 0x0004 +#define EXT3_FEATURE_COMPAT_EXT_ATTR 0x0008 +#define EXT3_FEATURE_COMPAT_RESIZE_INODE 0x0010 +#define EXT3_FEATURE_COMPAT_DIR_INDEX 0x0020 + +#define EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001 +#define EXT3_FEATURE_RO_COMPAT_LARGE_FILE 0x0002 +#define EXT3_FEATURE_RO_COMPAT_BTREE_DIR 0x0004 + +#define EXT3_FEATURE_INCOMPAT_COMPRESSION 0x0001 +#define EXT3_FEATURE_INCOMPAT_FILETYPE 0x0002 +#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 /* Needs recovery */ +#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV 0x0008 /* Journal device */ +#define EXT3_FEATURE_INCOMPAT_META_BG 0x0010 + +#define EXT3_FEATURE_COMPAT_SUPP EXT2_FEATURE_COMPAT_EXT_ATTR +#define EXT3_FEATURE_INCOMPAT_SUPP (EXT3_FEATURE_INCOMPAT_FILETYPE| \ + EXT3_FEATURE_INCOMPAT_RECOVER| \ + EXT3_FEATURE_INCOMPAT_META_BG) +#define EXT3_FEATURE_RO_COMPAT_SUPP (EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER| \ + EXT3_FEATURE_RO_COMPAT_LARGE_FILE| \ + EXT3_FEATURE_RO_COMPAT_BTREE_DIR) + +/* + * Default values for user and/or group using reserved blocks + */ +#define EXT3_DEF_RESUID 0 +#define EXT3_DEF_RESGID 0 + +/* + * Default mount options + */ +#define EXT3_DEFM_DEBUG 0x0001 +#define EXT3_DEFM_BSDGROUPS 0x0002 +#define EXT3_DEFM_XATTR_USER 0x0004 +#define EXT3_DEFM_ACL 0x0008 +#define EXT3_DEFM_UID16 0x0010 +#define EXT3_DEFM_JMODE 0x0060 +#define EXT3_DEFM_JMODE_DATA 0x0020 +#define EXT3_DEFM_JMODE_ORDERED 0x0040 +#define EXT3_DEFM_JMODE_WBACK 0x0060 + +/* + * Structure of a directory entry + */ +#define EXT3_NAME_LEN 255 + +struct ext3_dir_entry { + __le32 inode; /* Inode number */ + __le16 rec_len; /* Directory entry length */ + __le16 name_len; /* Name length */ + char name[EXT3_NAME_LEN]; /* File name */ +}; + +/* + * The new version of the directory entry. Since EXT3 structures are + * stored in intel byte order, and the name_len field could never be + * bigger than 255 chars, it's safe to reclaim the extra byte for the + * file_type field. + */ +struct ext3_dir_entry_2 { + __le32 inode; /* Inode number */ + __le16 rec_len; /* Directory entry length */ + __u8 name_len; /* Name length */ + __u8 file_type; + char name[EXT3_NAME_LEN]; /* File name */ +}; + +/* + * Ext3 directory file types. Only the low 3 bits are used. The + * other bits are reserved for now. + */ +#define EXT3_FT_UNKNOWN 0 +#define EXT3_FT_REG_FILE 1 +#define EXT3_FT_DIR 2 +#define EXT3_FT_CHRDEV 3 +#define EXT3_FT_BLKDEV 4 +#define EXT3_FT_FIFO 5 +#define EXT3_FT_SOCK 6 +#define EXT3_FT_SYMLINK 7 + +#define EXT3_FT_MAX 8 + +/* + * EXT3_DIR_PAD defines the directory entries boundaries + * + * NOTE: It must be a multiple of 4 + */ +#define EXT3_DIR_PAD 4 +#define EXT3_DIR_ROUND (EXT3_DIR_PAD - 1) +#define EXT3_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT3_DIR_ROUND) & \ + ~EXT3_DIR_ROUND) +#define EXT3_MAX_REC_LEN ((1<<16)-1) + +static inline unsigned ext3_rec_len_from_disk(__le16 dlen) +{ + unsigned len = le16_to_cpu(dlen); + + if (len == EXT3_MAX_REC_LEN) + return 1 << 16; + return len; +} + +static inline __le16 ext3_rec_len_to_disk(unsigned len) +{ + if (len == (1 << 16)) + return cpu_to_le16(EXT3_MAX_REC_LEN); + else if (len > (1 << 16)) + BUG(); + return cpu_to_le16(len); +} + +/* + * Hash Tree Directory indexing + * (c) Daniel Phillips, 2001 + */ + +#define is_dx(dir) (EXT3_HAS_COMPAT_FEATURE(dir->i_sb, \ + EXT3_FEATURE_COMPAT_DIR_INDEX) && \ + (EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) +#define EXT3_DIR_LINK_MAX(dir) (!is_dx(dir) && (dir)->i_nlink >= EXT3_LINK_MAX) +#define EXT3_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2 || (dir)->i_nlink == 1) + +/* Legal values for the dx_root hash_version field: */ + +#define DX_HASH_LEGACY 0 +#define DX_HASH_HALF_MD4 1 +#define DX_HASH_TEA 2 + +#ifdef __KERNEL__ + +/* hash info structure used by the directory hash */ +struct dx_hash_info +{ + u32 hash; + u32 minor_hash; + int hash_version; + u32 *seed; +}; + +#define EXT3_HTREE_EOF 0x7fffffff + +/* + * Control parameters used by ext3_htree_next_block + */ +#define HASH_NB_ALWAYS 1 + + +/* + * Describe an inode's exact location on disk and in memory + */ +struct ext3_iloc +{ + struct buffer_head *bh; + unsigned long offset; + unsigned long block_group; +}; + +static inline struct ext3_inode *ext3_raw_inode(struct ext3_iloc *iloc) +{ + return (struct ext3_inode *) (iloc->bh->b_data + iloc->offset); +} + +/* + * This structure is stuffed into the struct file's private_data field + * for directories. It is where we put information so that we can do + * readdir operations in hash tree order. + */ +struct dir_private_info { + struct rb_root root; + struct rb_node *curr_node; + struct fname *extra_fname; + loff_t last_pos; + __u32 curr_hash; + __u32 curr_minor_hash; + __u32 next_hash; +}; + +/* calculate the first block number of the group */ +static inline ext3_fsblk_t +ext3_group_first_block_no(struct super_block *sb, unsigned long group_no) +{ + return group_no * (ext3_fsblk_t)EXT3_BLOCKS_PER_GROUP(sb) + + le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block); +} + +/* + * Special error return code only used by dx_probe() and its callers. + */ +#define ERR_BAD_DX_DIR -75000 + +/* + * Function prototypes + */ + +/* + * Ok, these declarations are also in but none of the + * ext3 source programs needs to include it so they are duplicated here. + */ +# define NORET_TYPE /**/ +# define ATTRIB_NORET __attribute__((noreturn)) +# define NORET_AND noreturn, + +/* balloc.c */ +extern int ext3_bg_has_super(struct super_block *sb, int group); +extern unsigned long ext3_bg_num_gdb(struct super_block *sb, int group); +extern ext3_fsblk_t ext3_new_block (handle_t *handle, struct inode *inode, + ext3_fsblk_t goal, int *errp); +extern ext3_fsblk_t ext3_new_blocks (handle_t *handle, struct inode *inode, + ext3_fsblk_t goal, unsigned long *count, int *errp); +extern void ext3_free_blocks (handle_t *handle, struct inode *inode, + ext3_fsblk_t block, unsigned long count); +extern void ext3_free_blocks_sb (handle_t *handle, struct super_block *sb, + ext3_fsblk_t block, unsigned long count, + unsigned long *pdquot_freed_blocks); +extern ext3_fsblk_t ext3_count_free_blocks (struct super_block *); +extern void ext3_check_blocks_bitmap (struct super_block *); +extern struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, + unsigned int block_group, + struct buffer_head ** bh); +extern int ext3_should_retry_alloc(struct super_block *sb, int *retries); +extern void ext3_init_block_alloc_info(struct inode *); +extern void ext3_rsv_window_add(struct super_block *sb, struct ext3_reserve_window_node *rsv); + +/* dir.c */ +extern int ext3_check_dir_entry(const char *, struct inode *, + struct ext3_dir_entry_2 *, + struct buffer_head *, unsigned long); +extern int ext3_htree_store_dirent(struct file *dir_file, __u32 hash, + __u32 minor_hash, + struct ext3_dir_entry_2 *dirent); +extern void ext3_htree_free_dir_info(struct dir_private_info *p); + +/* fsync.c */ +extern int ext3_sync_file (struct file *, struct dentry *, int); + +/* hash.c */ +extern int ext3fs_dirhash(const char *name, int len, struct + dx_hash_info *hinfo); + +/* ialloc.c */ +extern struct inode * ext3_new_inode (handle_t *, struct inode *, int); +extern void ext3_free_inode (handle_t *, struct inode *); +extern struct inode * ext3_orphan_get (struct super_block *, unsigned long); +extern unsigned long ext3_count_free_inodes (struct super_block *); +extern unsigned long ext3_count_dirs (struct super_block *); +extern void ext3_check_inodes_bitmap (struct super_block *); +extern unsigned long ext3_count_free (struct buffer_head *, unsigned); + + +/* inode.c */ +int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, + struct buffer_head *bh, ext3_fsblk_t blocknr); +struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *); +struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *); +int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, + sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result, + int create, int extend_disksize); + +extern struct inode *ext3_iget(struct super_block *, unsigned long); +extern int ext3_write_inode (struct inode *, int); +extern int ext3_setattr (struct dentry *, struct iattr *); +extern void ext3_delete_inode (struct inode *); +extern int ext3_sync_inode (handle_t *, struct inode *); +extern void ext3_discard_reservation (struct inode *); +extern void ext3_dirty_inode(struct inode *); +extern int ext3_change_inode_journal_flag(struct inode *, int); +extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *); +extern void ext3_truncate (struct inode *); +extern void ext3_set_inode_flags(struct inode *); +extern void ext3_get_inode_flags(struct ext3_inode_info *); +extern void ext3_set_aops(struct inode *inode); + +/* ioctl.c */ +extern int ext3_ioctl (struct inode *, struct file *, unsigned int, + unsigned long); +extern long ext3_compat_ioctl (struct file *, unsigned int, unsigned long); + +/* namei.c */ +extern int ext3_orphan_add(handle_t *, struct inode *); +extern int ext3_orphan_del(handle_t *, struct inode *); +extern int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, + __u32 start_minor_hash, __u32 *next_hash); + +/* resize.c */ +extern int ext3_group_add(struct super_block *sb, + struct ext3_new_group_data *input); +extern int ext3_group_extend(struct super_block *sb, + struct ext3_super_block *es, + ext3_fsblk_t n_blocks_count); + +/* super.c */ +extern void ext3_error (struct super_block *, const char *, const char *, ...) + __attribute__ ((format (printf, 3, 4))); +extern void __ext3_std_error (struct super_block *, const char *, int); +extern void ext3_abort (struct super_block *, const char *, const char *, ...) + __attribute__ ((format (printf, 3, 4))); +extern void ext3_warning (struct super_block *, const char *, const char *, ...) + __attribute__ ((format (printf, 3, 4))); +extern void ext3_update_dynamic_rev (struct super_block *sb); + +#define ext3_std_error(sb, errno) \ +do { \ + if ((errno)) \ + __ext3_std_error((sb), __FUNCTION__, (errno)); \ +} while (0) + +/* + * Inodes and files operations + */ + +/* dir.c */ +extern const struct file_operations ext3_dir_operations; + +/* file.c */ +extern const struct inode_operations ext3_file_inode_operations; +extern const struct file_operations ext3_file_operations; + +/* namei.c */ +extern const struct inode_operations ext3_dir_inode_operations; +extern const struct inode_operations ext3_special_inode_operations; + +/* symlink.c */ +extern const struct inode_operations ext3_symlink_inode_operations; +extern const struct inode_operations ext3_fast_symlink_inode_operations; + + +#endif /* __KERNEL__ */ + +#endif /* _LINUX_EXT3_FS_H */ diff --git a/fs/ext3/ext3_i.h b/fs/ext3/ext3_i.h new file mode 100644 index 0000000..7894dd0 --- /dev/null +++ b/fs/ext3/ext3_i.h @@ -0,0 +1,147 @@ +/* + * linux/include/linux/ext3_fs_i.h + * + * Copyright (C) 1992, 1993, 1994, 1995 + * Remy Card (card@masi.ibp.fr) + * Laboratoire MASI - Institut Blaise Pascal + * Universite Pierre et Marie Curie (Paris VI) + * + * from + * + * linux/include/linux/minix_fs_i.h + * + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +#ifndef _LINUX_EXT3_FS_I +#define _LINUX_EXT3_FS_I + +#include +#include +#include +#include + +/* data type for block offset of block group */ +typedef int ext3_grpblk_t; + +/* data type for filesystem-wide blocks number */ +typedef unsigned long ext3_fsblk_t; + +#define E3FSBLK "%lu" + +struct ext3_reserve_window { + ext3_fsblk_t _rsv_start; /* First byte reserved */ + ext3_fsblk_t _rsv_end; /* Last byte reserved or 0 */ +}; + +struct ext3_reserve_window_node { + struct rb_node rsv_node; + __u32 rsv_goal_size; + __u32 rsv_alloc_hit; + struct ext3_reserve_window rsv_window; +}; + +struct ext3_block_alloc_info { + /* information about reservation window */ + struct ext3_reserve_window_node rsv_window_node; + /* + * was i_next_alloc_block in ext3_inode_info + * is the logical (file-relative) number of the + * most-recently-allocated block in this file. + * We use this for detecting linearly ascending allocation requests. + */ + __u32 last_alloc_logical_block; + /* + * Was i_next_alloc_goal in ext3_inode_info + * is the *physical* companion to i_next_alloc_block. + * it the physical block number of the block which was most-recentl + * allocated to this file. This give us the goal (target) for the next + * allocation when we detect linearly ascending requests. + */ + ext3_fsblk_t last_alloc_physical_block; +}; + +#define rsv_start rsv_window._rsv_start +#define rsv_end rsv_window._rsv_end + +/* + * third extended file system inode data in memory + */ +struct ext3_inode_info { + __le32 i_data[15]; /* unconverted */ + __u32 i_flags; +#ifdef EXT3_FRAGMENTS + __u32 i_faddr; + __u8 i_frag_no; + __u8 i_frag_size; +#endif + ext3_fsblk_t i_file_acl; + __u32 i_dir_acl; + __u32 i_dtime; + + /* + * i_block_group is the number of the block group which contains + * this file's inode. Constant across the lifetime of the inode, + * it is ued for making block allocation decisions - we try to + * place a file's data blocks near its inode block, and new inodes + * near to their parent directory's inode. + */ + __u32 i_block_group; + __u32 i_state; /* Dynamic state flags for ext3 */ + + /* block reservation info */ + struct ext3_block_alloc_info *i_block_alloc_info; + + __u32 i_dir_start_lookup; +#ifdef CONFIG_EXT3_FS_XATTR + /* + * Extended attributes can be read independently of the main file + * data. Taking i_mutex even when reading would cause contention + * between readers of EAs and writers of regular file data, so + * instead we synchronize on xattr_sem when reading or changing + * EAs. + */ + struct rw_semaphore xattr_sem; +#endif +#ifdef CONFIG_EXT3_FS_POSIX_ACL + struct posix_acl *i_acl; + struct posix_acl *i_default_acl; +#endif + + struct list_head i_orphan; /* unlinked but open inodes */ + + /* + * i_disksize keeps track of what the inode size is ON DISK, not + * in memory. During truncate, i_size is set to the new size by + * the VFS prior to calling ext3_truncate(), but the filesystem won't + * set i_disksize to 0 until the truncate is actually under way. + * + * The intent is that i_disksize always represents the blocks which + * are used by this file. This allows recovery to restart truncate + * on orphans if we crash during truncate. We actually write i_disksize + * into the on-disk inode when writing inodes out, instead of i_size. + * + * The only time when i_disksize and i_size may be different is when + * a truncate is in progress. The only things which change i_disksize + * are ext3_get_block (growth) and ext3_truncate (shrinkth). + */ + loff_t i_disksize; + + /* on-disk additional length */ + __u16 i_extra_isize; + + /* + * truncate_mutex is for serialising ext3_truncate() against + * ext3_getblock(). In the 2.4 ext2 design, great chunks of inode's + * data tree are chopped off during truncate. We can't do that in + * ext3 because whenever we perform intermediate commits during + * truncate, the inode and all the metadata blocks *must* be in a + * consistent state which allows truncation of the orphans to restart + * during recovery. Hence we must fix the get_block-vs-truncate race + * by other means, so we have truncate_mutex. + */ + struct mutex truncate_mutex; + struct inode vfs_inode; +}; + +#endif /* _LINUX_EXT3_FS_I */ diff --git a/fs/ext3/ext3_jbd.c b/fs/ext3/ext3_jbd.c index d401f14..2dd32b4 100644 --- a/fs/ext3/ext3_jbd.c +++ b/fs/ext3/ext3_jbd.c @@ -2,7 +2,12 @@ * Interface between ext3 and JBD */ -#include +#include +#include +#include + +#include "ext3.h" +#include "ext3_jbd.h" int __ext3_journal_get_undo_access(const char *where, handle_t *handle, struct buffer_head *bh) diff --git a/fs/ext3/ext3_jbd.h b/fs/ext3/ext3_jbd.h new file mode 100644 index 0000000..aadbdef --- /dev/null +++ b/fs/ext3/ext3_jbd.h @@ -0,0 +1,225 @@ +/* + * linux/include/linux/ext3_jbd.h + * + * Written by Stephen C. Tweedie , 1999 + * + * Copyright 1998--1999 Red Hat corp --- All Rights Reserved + * + * This file is part of the Linux kernel and is made available under + * the terms of the GNU General Public License, version 2, or at your + * option, any later version, incorporated herein by reference. + * + * Ext3-specific journaling extensions. + */ + +#ifndef _LINUX_EXT3_JBD_H +#define _LINUX_EXT3_JBD_H + +#include +#include + +#define EXT3_JOURNAL(inode) (EXT3_SB((inode)->i_sb)->s_journal) + +/* Define the number of blocks we need to account to a transaction to + * modify one block of data. + * + * We may have to touch one inode, one bitmap buffer, up to three + * indirection blocks, the group and superblock summaries, and the data + * block to complete the transaction. */ + +#define EXT3_SINGLEDATA_TRANS_BLOCKS 8U + +/* Extended attribute operations touch at most two data buffers, + * two bitmap buffers, and two group summaries, in addition to the inode + * and the superblock, which are already accounted for. */ + +#define EXT3_XATTR_TRANS_BLOCKS 6U + +/* Define the minimum size for a transaction which modifies data. This + * needs to take into account the fact that we may end up modifying two + * quota files too (one for the group, one for the user quota). The + * superblock only gets updated once, of course, so don't bother + * counting that again for the quota updates. */ + +#define EXT3_DATA_TRANS_BLOCKS(sb) (EXT3_SINGLEDATA_TRANS_BLOCKS + \ + EXT3_XATTR_TRANS_BLOCKS - 2 + \ + 2*EXT3_QUOTA_TRANS_BLOCKS(sb)) + +/* Delete operations potentially hit one directory's namespace plus an + * entire inode, plus arbitrary amounts of bitmap/indirection data. Be + * generous. We can grow the delete transaction later if necessary. */ + +#define EXT3_DELETE_TRANS_BLOCKS(sb) (2 * EXT3_DATA_TRANS_BLOCKS(sb) + 64) + +/* Define an arbitrary limit for the amount of data we will anticipate + * writing to any given transaction. For unbounded transactions such as + * write(2) and truncate(2) we can write more than this, but we always + * start off at the maximum transaction size and grow the transaction + * optimistically as we go. */ + +#define EXT3_MAX_TRANS_DATA 64U + +/* We break up a large truncate or write transaction once the handle's + * buffer credits gets this low, we need either to extend the + * transaction or to start a new one. Reserve enough space here for + * inode, bitmap, superblock, group and indirection updates for at least + * one block, plus two quota updates. Quota allocations are not + * needed. */ + +#define EXT3_RESERVE_TRANS_BLOCKS 12U + +#define EXT3_INDEX_EXTRA_TRANS_BLOCKS 8 + +#ifdef CONFIG_QUOTA +/* Amount of blocks needed for quota update - we know that the structure was + * allocated so we need to update only inode+data */ +#define EXT3_QUOTA_TRANS_BLOCKS(sb) (test_opt(sb, QUOTA) ? 2 : 0) +/* Amount of blocks needed for quota insert/delete - we do some block writes + * but inode, sb and group updates are done only once */ +#define EXT3_QUOTA_INIT_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_INIT_ALLOC*\ + (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_INIT_REWRITE) : 0) +#define EXT3_QUOTA_DEL_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_DEL_ALLOC*\ + (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_DEL_REWRITE) : 0) +#else +#define EXT3_QUOTA_TRANS_BLOCKS(sb) 0 +#define EXT3_QUOTA_INIT_BLOCKS(sb) 0 +#define EXT3_QUOTA_DEL_BLOCKS(sb) 0 +#endif + +int +ext3_mark_iloc_dirty(handle_t *handle, + struct inode *inode, + struct ext3_iloc *iloc); + +/* + * On success, We end up with an outstanding reference count against + * iloc->bh. This _must_ be cleaned up later. + */ + +int ext3_reserve_inode_write(handle_t *handle, struct inode *inode, + struct ext3_iloc *iloc); + +int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode); + +/* + * Wrapper functions with which ext3 calls into JBD. The intent here is + * to allow these to be turned into appropriate stubs so ext3 can control + * ext2 filesystems, so ext2+ext3 systems only nee one fs. This work hasn't + * been done yet. + */ + +static inline void ext3_journal_release_buffer(handle_t *handle, + struct buffer_head *bh) +{ + journal_release_buffer(handle, bh); +} + +void ext3_journal_abort_handle(const char *caller, const char *err_fn, + struct buffer_head *bh, handle_t *handle, int err); + +int __ext3_journal_get_undo_access(const char *where, handle_t *handle, + struct buffer_head *bh); + +int __ext3_journal_get_write_access(const char *where, handle_t *handle, + struct buffer_head *bh); + +int __ext3_journal_forget(const char *where, handle_t *handle, + struct buffer_head *bh); + +int __ext3_journal_revoke(const char *where, handle_t *handle, + unsigned long blocknr, struct buffer_head *bh); + +int __ext3_journal_get_create_access(const char *where, + handle_t *handle, struct buffer_head *bh); + +int __ext3_journal_dirty_metadata(const char *where, + handle_t *handle, struct buffer_head *bh); + +#define ext3_journal_get_undo_access(handle, bh) \ + __ext3_journal_get_undo_access(__FUNCTION__, (handle), (bh)) +#define ext3_journal_get_write_access(handle, bh) \ + __ext3_journal_get_write_access(__FUNCTION__, (handle), (bh)) +#define ext3_journal_revoke(handle, blocknr, bh) \ + __ext3_journal_revoke(__FUNCTION__, (handle), (blocknr), (bh)) +#define ext3_journal_get_create_access(handle, bh) \ + __ext3_journal_get_create_access(__FUNCTION__, (handle), (bh)) +#define ext3_journal_dirty_metadata(handle, bh) \ + __ext3_journal_dirty_metadata(__FUNCTION__, (handle), (bh)) +#define ext3_journal_forget(handle, bh) \ + __ext3_journal_forget(__FUNCTION__, (handle), (bh)) + +int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh); + +handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks); +int __ext3_journal_stop(const char *where, handle_t *handle); + +static inline handle_t *ext3_journal_start(struct inode *inode, int nblocks) +{ + return ext3_journal_start_sb(inode->i_sb, nblocks); +} + +#define ext3_journal_stop(handle) \ + __ext3_journal_stop(__FUNCTION__, (handle)) + +static inline handle_t *ext3_journal_current_handle(void) +{ + return journal_current_handle(); +} + +static inline int ext3_journal_extend(handle_t *handle, int nblocks) +{ + return journal_extend(handle, nblocks); +} + +static inline int ext3_journal_restart(handle_t *handle, int nblocks) +{ + return journal_restart(handle, nblocks); +} + +static inline int ext3_journal_blocks_per_page(struct inode *inode) +{ + return journal_blocks_per_page(inode); +} + +static inline int ext3_journal_force_commit(journal_t *journal) +{ + return journal_force_commit(journal); +} + +/* super.c */ +int ext3_force_commit(struct super_block *sb); + +static inline int ext3_should_journal_data(struct inode *inode) +{ + if (!S_ISREG(inode->i_mode)) + return 1; + if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA) + return 1; + if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) + return 1; + return 0; +} + +static inline int ext3_should_order_data(struct inode *inode) +{ + if (!S_ISREG(inode->i_mode)) + return 0; + if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) + return 0; + if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA) + return 1; + return 0; +} + +static inline int ext3_should_writeback_data(struct inode *inode) +{ + if (!S_ISREG(inode->i_mode)) + return 0; + if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) + return 0; + if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA) + return 1; + return 0; +} + +#endif /* _LINUX_EXT3_JBD_H */ diff --git a/fs/ext3/ext3_sb.h b/fs/ext3/ext3_sb.h new file mode 100644 index 0000000..b65f028 --- /dev/null +++ b/fs/ext3/ext3_sb.h @@ -0,0 +1,86 @@ +/* + * linux/include/linux/ext3_fs_sb.h + * + * Copyright (C) 1992, 1993, 1994, 1995 + * Remy Card (card@masi.ibp.fr) + * Laboratoire MASI - Institut Blaise Pascal + * Universite Pierre et Marie Curie (Paris VI) + * + * from + * + * linux/include/linux/minix_fs_sb.h + * + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +#ifndef _LINUX_EXT3_FS_SB +#define _LINUX_EXT3_FS_SB + +#ifdef __KERNEL__ +#include +#include +#include +#include +#endif +#include + +/* + * third extended-fs super-block data in memory + */ +struct ext3_sb_info { + unsigned long s_frag_size; /* Size of a fragment in bytes */ + unsigned long s_frags_per_block;/* Number of fragments per block */ + unsigned long s_inodes_per_block;/* Number of inodes per block */ + unsigned long s_frags_per_group;/* Number of fragments in a group */ + unsigned long s_blocks_per_group;/* Number of blocks in a group */ + unsigned long s_inodes_per_group;/* Number of inodes in a group */ + unsigned long s_itb_per_group; /* Number of inode table blocks per group */ + unsigned long s_gdb_count; /* Number of group descriptor blocks */ + unsigned long s_desc_per_block; /* Number of group descriptors per block */ + unsigned long s_groups_count; /* Number of groups in the fs */ + unsigned long s_overhead_last; /* Last calculated overhead */ + unsigned long s_blocks_last; /* Last seen block count */ + struct buffer_head * s_sbh; /* Buffer containing the super block */ + struct ext3_super_block * s_es; /* Pointer to the super block in the buffer */ + struct buffer_head ** s_group_desc; + unsigned long s_mount_opt; + ext3_fsblk_t s_sb_block; + uid_t s_resuid; + gid_t s_resgid; + unsigned short s_mount_state; + unsigned short s_pad; + int s_addr_per_block_bits; + int s_desc_per_block_bits; + int s_inode_size; + int s_first_ino; + spinlock_t s_next_gen_lock; + u32 s_next_generation; + u32 s_hash_seed[4]; + int s_def_hash_version; + struct percpu_counter s_freeblocks_counter; + struct percpu_counter s_freeinodes_counter; + struct percpu_counter s_dirs_counter; + struct blockgroup_lock s_blockgroup_lock; + + /* root of the per fs reservation window tree */ + spinlock_t s_rsv_window_lock; + struct rb_root s_rsv_window_root; + struct ext3_reserve_window_node s_rsv_window_head; + + /* Journaling */ + struct inode * s_journal_inode; + struct journal_s * s_journal; + struct list_head s_orphan; + unsigned long s_commit_interval; + struct block_device *journal_bdev; +#ifdef CONFIG_JBD_DEBUG + struct timer_list turn_ro_timer; /* For turning read-only (crash simulation) */ + wait_queue_head_t ro_wait_queue; /* For people waiting for the fs to go read-only */ +#endif +#ifdef CONFIG_QUOTA + char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */ + int s_jquota_fmt; /* Format of quota to use */ +#endif +}; + +#endif /* _LINUX_EXT3_FS_SB */ diff --git a/fs/ext3/file.c b/fs/ext3/file.c index acc4913..9d57f8e 100644 --- a/fs/ext3/file.c +++ b/fs/ext3/file.c @@ -20,9 +20,8 @@ #include #include -#include -#include -#include +#include "ext3.h" +#include "ext3_jbd.h" #include "xattr.h" #include "acl.h" diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c index d336341..a785985 100644 --- a/fs/ext3/fsync.c +++ b/fs/ext3/fsync.c @@ -26,9 +26,8 @@ #include #include #include -#include -#include -#include +#include "ext3.h" +#include "ext3_jbd.h" /* * akpm: A new design for ext3_sync_file(). diff --git a/fs/ext3/hash.c b/fs/ext3/hash.c index c30e149..9433d53 100644 --- a/fs/ext3/hash.c +++ b/fs/ext3/hash.c @@ -10,9 +10,8 @@ */ #include -#include -#include #include +#include "ext3.h" #define DELTA 0x9E3779B9 diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c index 7712682..34daa2b 100644 --- a/fs/ext3/ialloc.c +++ b/fs/ext3/ialloc.c @@ -14,15 +14,14 @@ #include #include -#include -#include -#include #include #include #include #include #include #include +#include "ext3.h" +#include "ext3_jbd.h" #include diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 6ae4ecf..beb8569 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -25,8 +25,6 @@ #include #include #include -#include -#include #include #include #include @@ -36,6 +34,8 @@ #include #include #include +#include "ext3.h" +#include "ext3_jbd.h" #include "xattr.h" #include "acl.h" diff --git a/fs/ext3/ioctl.c b/fs/ext3/ioctl.c index 0d0c701..0f3d04c 100644 --- a/fs/ext3/ioctl.c +++ b/fs/ext3/ioctl.c @@ -8,15 +8,14 @@ */ #include -#include #include -#include -#include #include #include #include #include #include +#include "ext3.h" +#include "ext3_jbd.h" int ext3_ioctl (struct inode * inode, struct file * filp, unsigned int cmd, unsigned long arg) diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 0b8cf80..2bbcc6d 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -26,16 +26,15 @@ #include #include -#include #include -#include -#include #include #include #include #include #include #include +#include "ext3.h" +#include "ext3_jbd.h" #include "namei.h" #include "xattr.h" diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c index 28cfd0b..7c8c55f 100644 --- a/fs/ext3/resize.c +++ b/fs/ext3/resize.c @@ -11,11 +11,11 @@ #define EXT3FS_DEBUG -#include - #include +#include #include - +#include "ext3.h" +#include "ext3_jbd.h" #define outside(b, first, last) ((b) < (first) || (b) >= (last)) #define inside(b, first, last) ((b) >= (first) && (b) < (last)) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index fe3119a..e77bb36 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -20,9 +20,6 @@ #include #include #include -#include -#include -#include #include #include #include @@ -37,6 +34,8 @@ #include #include #include +#include "ext3.h" +#include "ext3_jbd.h" #include diff --git a/fs/ext3/symlink.c b/fs/ext3/symlink.c index ff7b4cc..44b6185 100644 --- a/fs/ext3/symlink.c +++ b/fs/ext3/symlink.c @@ -18,9 +18,8 @@ */ #include -#include -#include #include +#include "ext3.h" #include "xattr.h" static void * ext3_follow_link(struct dentry *dentry, struct nameidata *nd) diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c index d4a4f0e..5b2eb4a 100644 --- a/fs/ext3/xattr.c +++ b/fs/ext3/xattr.c @@ -53,11 +53,11 @@ #include #include #include -#include -#include #include #include #include +#include "ext3.h" +#include "ext3_jbd.h" #include "xattr.h" #include "acl.h" diff --git a/fs/ext3/xattr_security.c b/fs/ext3/xattr_security.c index 821efaf..afa6f4b 100644 --- a/fs/ext3/xattr_security.c +++ b/fs/ext3/xattr_security.c @@ -6,8 +6,8 @@ #include #include #include -#include -#include +#include "ext3.h" +#include "ext3_jbd.h" #include #include "xattr.h" diff --git a/fs/ext3/xattr_trusted.c b/fs/ext3/xattr_trusted.c index 0327497..75bceb3 100644 --- a/fs/ext3/xattr_trusted.c +++ b/fs/ext3/xattr_trusted.c @@ -9,8 +9,8 @@ #include #include #include -#include -#include +#include "ext3.h" +#include "ext3_jbd.h" #include "xattr.h" #define XATTR_TRUSTED_PREFIX "trusted." diff --git a/fs/ext3/xattr_user.c b/fs/ext3/xattr_user.c index 1abd8f9..7a70e96 100644 --- a/fs/ext3/xattr_user.c +++ b/fs/ext3/xattr_user.c @@ -5,11 +5,12 @@ * Copyright (C) 2001 by Andreas Gruenbacher, */ +#include #include #include #include -#include -#include +#include "ext3.h" +#include "ext3_jbd.h" #include "xattr.h" #define XATTR_USER_PREFIX "user." diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h deleted file mode 100644 index 36c5403..0000000 --- a/include/linux/ext3_fs.h +++ /dev/null @@ -1,896 +0,0 @@ -/* - * linux/include/linux/ext3_fs.h - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/include/linux/minix_fs.h - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#ifndef _LINUX_EXT3_FS_H -#define _LINUX_EXT3_FS_H - -#include -#include - -/* - * The second extended filesystem constants/structures - */ - -/* - * Define EXT3FS_DEBUG to produce debug messages - */ -#undef EXT3FS_DEBUG - -/* - * Define EXT3_RESERVATION to reserve data blocks for expanding files - */ -#define EXT3_DEFAULT_RESERVE_BLOCKS 8 -/*max window size: 1024(direct blocks) + 3([t,d]indirect blocks) */ -#define EXT3_MAX_RESERVE_BLOCKS 1027 -#define EXT3_RESERVE_WINDOW_NOT_ALLOCATED 0 - -/* - * Debug code - */ -#ifdef EXT3FS_DEBUG -#define ext3_debug(f, a...) \ - do { \ - printk (KERN_DEBUG "EXT3-fs DEBUG (%s, %d): %s:", \ - __FILE__, __LINE__, __FUNCTION__); \ - printk (KERN_DEBUG f, ## a); \ - } while (0) -#else -#define ext3_debug(f, a...) do {} while (0) -#endif - -/* - * Special inodes numbers - */ -#define EXT3_BAD_INO 1 /* Bad blocks inode */ -#define EXT3_ROOT_INO 2 /* Root inode */ -#define EXT3_BOOT_LOADER_INO 5 /* Boot loader inode */ -#define EXT3_UNDEL_DIR_INO 6 /* Undelete directory inode */ -#define EXT3_RESIZE_INO 7 /* Reserved group descriptors inode */ -#define EXT3_JOURNAL_INO 8 /* Journal inode */ - -/* First non-reserved inode for old ext3 filesystems */ -#define EXT3_GOOD_OLD_FIRST_INO 11 - -/* - * Maximal count of links to a file - */ -#define EXT3_LINK_MAX 32000 - -/* - * Macro-instructions used to manage several block sizes - */ -#define EXT3_MIN_BLOCK_SIZE 1024 -#define EXT3_MAX_BLOCK_SIZE 65536 -#define EXT3_MIN_BLOCK_LOG_SIZE 10 -#ifdef __KERNEL__ -# define EXT3_BLOCK_SIZE(s) ((s)->s_blocksize) -#else -# define EXT3_BLOCK_SIZE(s) (EXT3_MIN_BLOCK_SIZE << (s)->s_log_block_size) -#endif -#define EXT3_ADDR_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (__u32)) -#ifdef __KERNEL__ -# define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits) -#else -# define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10) -#endif -#ifdef __KERNEL__ -#define EXT3_ADDR_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_addr_per_block_bits) -#define EXT3_INODE_SIZE(s) (EXT3_SB(s)->s_inode_size) -#define EXT3_FIRST_INO(s) (EXT3_SB(s)->s_first_ino) -#else -#define EXT3_INODE_SIZE(s) (((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \ - EXT3_GOOD_OLD_INODE_SIZE : \ - (s)->s_inode_size) -#define EXT3_FIRST_INO(s) (((s)->s_rev_level == EXT3_GOOD_OLD_REV) ? \ - EXT3_GOOD_OLD_FIRST_INO : \ - (s)->s_first_ino) -#endif - -/* - * Macro-instructions used to manage fragments - */ -#define EXT3_MIN_FRAG_SIZE 1024 -#define EXT3_MAX_FRAG_SIZE 4096 -#define EXT3_MIN_FRAG_LOG_SIZE 10 -#ifdef __KERNEL__ -# define EXT3_FRAG_SIZE(s) (EXT3_SB(s)->s_frag_size) -# define EXT3_FRAGS_PER_BLOCK(s) (EXT3_SB(s)->s_frags_per_block) -#else -# define EXT3_FRAG_SIZE(s) (EXT3_MIN_FRAG_SIZE << (s)->s_log_frag_size) -# define EXT3_FRAGS_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / EXT3_FRAG_SIZE(s)) -#endif - -/* - * Structure of a blocks group descriptor - */ -struct ext3_group_desc -{ - __le32 bg_block_bitmap; /* Blocks bitmap block */ - __le32 bg_inode_bitmap; /* Inodes bitmap block */ - __le32 bg_inode_table; /* Inodes table block */ - __le16 bg_free_blocks_count; /* Free blocks count */ - __le16 bg_free_inodes_count; /* Free inodes count */ - __le16 bg_used_dirs_count; /* Directories count */ - __u16 bg_pad; - __le32 bg_reserved[3]; -}; - -/* - * Macro-instructions used to manage group descriptors - */ -#ifdef __KERNEL__ -# define EXT3_BLOCKS_PER_GROUP(s) (EXT3_SB(s)->s_blocks_per_group) -# define EXT3_DESC_PER_BLOCK(s) (EXT3_SB(s)->s_desc_per_block) -# define EXT3_INODES_PER_GROUP(s) (EXT3_SB(s)->s_inodes_per_group) -# define EXT3_DESC_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_desc_per_block_bits) -#else -# define EXT3_BLOCKS_PER_GROUP(s) ((s)->s_blocks_per_group) -# define EXT3_DESC_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (struct ext3_group_desc)) -# define EXT3_INODES_PER_GROUP(s) ((s)->s_inodes_per_group) -#endif - -/* - * Constants relative to the data blocks - */ -#define EXT3_NDIR_BLOCKS 12 -#define EXT3_IND_BLOCK EXT3_NDIR_BLOCKS -#define EXT3_DIND_BLOCK (EXT3_IND_BLOCK + 1) -#define EXT3_TIND_BLOCK (EXT3_DIND_BLOCK + 1) -#define EXT3_N_BLOCKS (EXT3_TIND_BLOCK + 1) - -/* - * Inode flags - */ -#define EXT3_SECRM_FL 0x00000001 /* Secure deletion */ -#define EXT3_UNRM_FL 0x00000002 /* Undelete */ -#define EXT3_COMPR_FL 0x00000004 /* Compress file */ -#define EXT3_SYNC_FL 0x00000008 /* Synchronous updates */ -#define EXT3_IMMUTABLE_FL 0x00000010 /* Immutable file */ -#define EXT3_APPEND_FL 0x00000020 /* writes to file may only append */ -#define EXT3_NODUMP_FL 0x00000040 /* do not dump file */ -#define EXT3_NOATIME_FL 0x00000080 /* do not update atime */ -/* Reserved for compression usage... */ -#define EXT3_DIRTY_FL 0x00000100 -#define EXT3_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ -#define EXT3_NOCOMPR_FL 0x00000400 /* Don't compress */ -#define EXT3_ECOMPR_FL 0x00000800 /* Compression error */ -/* End compression flags --- maybe not all used */ -#define EXT3_INDEX_FL 0x00001000 /* hash-indexed directory */ -#define EXT3_IMAGIC_FL 0x00002000 /* AFS directory */ -#define EXT3_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */ -#define EXT3_NOTAIL_FL 0x00008000 /* file tail should not be merged */ -#define EXT3_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ -#define EXT3_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ -#define EXT3_RESERVED_FL 0x80000000 /* reserved for ext3 lib */ - -#define EXT3_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ -#define EXT3_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ - -/* - * Inode dynamic state flags - */ -#define EXT3_STATE_JDATA 0x00000001 /* journaled data exists */ -#define EXT3_STATE_NEW 0x00000002 /* inode is newly created */ -#define EXT3_STATE_XATTR 0x00000004 /* has in-inode xattrs */ - -/* Used to pass group descriptor data when online resize is done */ -struct ext3_new_group_input { - __u32 group; /* Group number for this data */ - __u32 block_bitmap; /* Absolute block number of block bitmap */ - __u32 inode_bitmap; /* Absolute block number of inode bitmap */ - __u32 inode_table; /* Absolute block number of inode table start */ - __u32 blocks_count; /* Total number of blocks in this group */ - __u16 reserved_blocks; /* Number of reserved blocks in this group */ - __u16 unused; -}; - -/* The struct ext3_new_group_input in kernel space, with free_blocks_count */ -struct ext3_new_group_data { - __u32 group; - __u32 block_bitmap; - __u32 inode_bitmap; - __u32 inode_table; - __u32 blocks_count; - __u16 reserved_blocks; - __u16 unused; - __u32 free_blocks_count; -}; - - -/* - * ioctl commands - */ -#define EXT3_IOC_GETFLAGS FS_IOC_GETFLAGS -#define EXT3_IOC_SETFLAGS FS_IOC_SETFLAGS -#define EXT3_IOC_GETVERSION _IOR('f', 3, long) -#define EXT3_IOC_SETVERSION _IOW('f', 4, long) -#define EXT3_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long) -#define EXT3_IOC_GROUP_ADD _IOW('f', 8,struct ext3_new_group_input) -#define EXT3_IOC_GETVERSION_OLD FS_IOC_GETVERSION -#define EXT3_IOC_SETVERSION_OLD FS_IOC_SETVERSION -#ifdef CONFIG_JBD_DEBUG -#define EXT3_IOC_WAIT_FOR_READONLY _IOR('f', 99, long) -#endif -#define EXT3_IOC_GETRSVSZ _IOR('f', 5, long) -#define EXT3_IOC_SETRSVSZ _IOW('f', 6, long) - -/* - * ioctl commands in 32 bit emulation - */ -#define EXT3_IOC32_GETFLAGS FS_IOC32_GETFLAGS -#define EXT3_IOC32_SETFLAGS FS_IOC32_SETFLAGS -#define EXT3_IOC32_GETVERSION _IOR('f', 3, int) -#define EXT3_IOC32_SETVERSION _IOW('f', 4, int) -#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int) -#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int) -#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int) -#ifdef CONFIG_JBD_DEBUG -#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int) -#endif -#define EXT3_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION -#define EXT3_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION - - -/* - * Mount options - */ -struct ext3_mount_options { - unsigned long s_mount_opt; - uid_t s_resuid; - gid_t s_resgid; - unsigned long s_commit_interval; -#ifdef CONFIG_QUOTA - int s_jquota_fmt; - char *s_qf_names[MAXQUOTAS]; -#endif -}; - -/* - * Structure of an inode on the disk - */ -struct ext3_inode { - __le16 i_mode; /* File mode */ - __le16 i_uid; /* Low 16 bits of Owner Uid */ - __le32 i_size; /* Size in bytes */ - __le32 i_atime; /* Access time */ - __le32 i_ctime; /* Creation time */ - __le32 i_mtime; /* Modification time */ - __le32 i_dtime; /* Deletion Time */ - __le16 i_gid; /* Low 16 bits of Group Id */ - __le16 i_links_count; /* Links count */ - __le32 i_blocks; /* Blocks count */ - __le32 i_flags; /* File flags */ - union { - struct { - __u32 l_i_reserved1; - } linux1; - struct { - __u32 h_i_translator; - } hurd1; - struct { - __u32 m_i_reserved1; - } masix1; - } osd1; /* OS dependent 1 */ - __le32 i_block[EXT3_N_BLOCKS];/* Pointers to blocks */ - __le32 i_generation; /* File version (for NFS) */ - __le32 i_file_acl; /* File ACL */ - __le32 i_dir_acl; /* Directory ACL */ - __le32 i_faddr; /* Fragment address */ - union { - struct { - __u8 l_i_frag; /* Fragment number */ - __u8 l_i_fsize; /* Fragment size */ - __u16 i_pad1; - __le16 l_i_uid_high; /* these 2 fields */ - __le16 l_i_gid_high; /* were reserved2[0] */ - __u32 l_i_reserved2; - } linux2; - struct { - __u8 h_i_frag; /* Fragment number */ - __u8 h_i_fsize; /* Fragment size */ - __u16 h_i_mode_high; - __u16 h_i_uid_high; - __u16 h_i_gid_high; - __u32 h_i_author; - } hurd2; - struct { - __u8 m_i_frag; /* Fragment number */ - __u8 m_i_fsize; /* Fragment size */ - __u16 m_pad1; - __u32 m_i_reserved2[2]; - } masix2; - } osd2; /* OS dependent 2 */ - __le16 i_extra_isize; - __le16 i_pad1; -}; - -#define i_size_high i_dir_acl - -#if defined(__KERNEL__) || defined(__linux__) -#define i_reserved1 osd1.linux1.l_i_reserved1 -#define i_frag osd2.linux2.l_i_frag -#define i_fsize osd2.linux2.l_i_fsize -#define i_uid_low i_uid -#define i_gid_low i_gid -#define i_uid_high osd2.linux2.l_i_uid_high -#define i_gid_high osd2.linux2.l_i_gid_high -#define i_reserved2 osd2.linux2.l_i_reserved2 - -#elif defined(__GNU__) - -#define i_translator osd1.hurd1.h_i_translator -#define i_frag osd2.hurd2.h_i_frag; -#define i_fsize osd2.hurd2.h_i_fsize; -#define i_uid_high osd2.hurd2.h_i_uid_high -#define i_gid_high osd2.hurd2.h_i_gid_high -#define i_author osd2.hurd2.h_i_author - -#elif defined(__masix__) - -#define i_reserved1 osd1.masix1.m_i_reserved1 -#define i_frag osd2.masix2.m_i_frag -#define i_fsize osd2.masix2.m_i_fsize -#define i_reserved2 osd2.masix2.m_i_reserved2 - -#endif /* defined(__KERNEL__) || defined(__linux__) */ - -/* - * File system states - */ -#define EXT3_VALID_FS 0x0001 /* Unmounted cleanly */ -#define EXT3_ERROR_FS 0x0002 /* Errors detected */ -#define EXT3_ORPHAN_FS 0x0004 /* Orphans being recovered */ - -/* - * Mount flags - */ -#define EXT3_MOUNT_CHECK 0x00001 /* Do mount-time checks */ -#define EXT3_MOUNT_OLDALLOC 0x00002 /* Don't use the new Orlov allocator */ -#define EXT3_MOUNT_GRPID 0x00004 /* Create files with directory's group */ -#define EXT3_MOUNT_DEBUG 0x00008 /* Some debugging messages */ -#define EXT3_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */ -#define EXT3_MOUNT_ERRORS_RO 0x00020 /* Remount fs ro on errors */ -#define EXT3_MOUNT_ERRORS_PANIC 0x00040 /* Panic on errors */ -#define EXT3_MOUNT_MINIX_DF 0x00080 /* Mimics the Minix statfs */ -#define EXT3_MOUNT_NOLOAD 0x00100 /* Don't use existing journal*/ -#define EXT3_MOUNT_ABORT 0x00200 /* Fatal error detected */ -#define EXT3_MOUNT_DATA_FLAGS 0x00C00 /* Mode for data writes: */ -#define EXT3_MOUNT_JOURNAL_DATA 0x00400 /* Write data to journal */ -#define EXT3_MOUNT_ORDERED_DATA 0x00800 /* Flush data before commit */ -#define EXT3_MOUNT_WRITEBACK_DATA 0x00C00 /* No data ordering */ -#define EXT3_MOUNT_UPDATE_JOURNAL 0x01000 /* Update the journal format */ -#define EXT3_MOUNT_NO_UID32 0x02000 /* Disable 32-bit UIDs */ -#define EXT3_MOUNT_XATTR_USER 0x04000 /* Extended user attributes */ -#define EXT3_MOUNT_POSIX_ACL 0x08000 /* POSIX Access Control Lists */ -#define EXT3_MOUNT_RESERVATION 0x10000 /* Preallocation */ -#define EXT3_MOUNT_BARRIER 0x20000 /* Use block barriers */ -#define EXT3_MOUNT_NOBH 0x40000 /* No bufferheads */ -#define EXT3_MOUNT_QUOTA 0x80000 /* Some quota option set */ -#define EXT3_MOUNT_USRQUOTA 0x100000 /* "old" user quota */ -#define EXT3_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */ - -/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */ -#ifndef _LINUX_EXT2_FS_H -#define clear_opt(o, opt) o &= ~EXT3_MOUNT_##opt -#define set_opt(o, opt) o |= EXT3_MOUNT_##opt -#define test_opt(sb, opt) (EXT3_SB(sb)->s_mount_opt & \ - EXT3_MOUNT_##opt) -#else -#define EXT2_MOUNT_NOLOAD EXT3_MOUNT_NOLOAD -#define EXT2_MOUNT_ABORT EXT3_MOUNT_ABORT -#define EXT2_MOUNT_DATA_FLAGS EXT3_MOUNT_DATA_FLAGS -#endif - -#define ext3_set_bit ext2_set_bit -#define ext3_set_bit_atomic ext2_set_bit_atomic -#define ext3_clear_bit ext2_clear_bit -#define ext3_clear_bit_atomic ext2_clear_bit_atomic -#define ext3_test_bit ext2_test_bit -#define ext3_find_first_zero_bit ext2_find_first_zero_bit -#define ext3_find_next_zero_bit ext2_find_next_zero_bit - -/* - * Maximal mount counts between two filesystem checks - */ -#define EXT3_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */ -#define EXT3_DFL_CHECKINTERVAL 0 /* Don't use interval check */ - -/* - * Behaviour when detecting errors - */ -#define EXT3_ERRORS_CONTINUE 1 /* Continue execution */ -#define EXT3_ERRORS_RO 2 /* Remount fs read-only */ -#define EXT3_ERRORS_PANIC 3 /* Panic */ -#define EXT3_ERRORS_DEFAULT EXT3_ERRORS_CONTINUE - -/* - * Structure of the super block - */ -struct ext3_super_block { -/*00*/ __le32 s_inodes_count; /* Inodes count */ - __le32 s_blocks_count; /* Blocks count */ - __le32 s_r_blocks_count; /* Reserved blocks count */ - __le32 s_free_blocks_count; /* Free blocks count */ -/*10*/ __le32 s_free_inodes_count; /* Free inodes count */ - __le32 s_first_data_block; /* First Data Block */ - __le32 s_log_block_size; /* Block size */ - __le32 s_log_frag_size; /* Fragment size */ -/*20*/ __le32 s_blocks_per_group; /* # Blocks per group */ - __le32 s_frags_per_group; /* # Fragments per group */ - __le32 s_inodes_per_group; /* # Inodes per group */ - __le32 s_mtime; /* Mount time */ -/*30*/ __le32 s_wtime; /* Write time */ - __le16 s_mnt_count; /* Mount count */ - __le16 s_max_mnt_count; /* Maximal mount count */ - __le16 s_magic; /* Magic signature */ - __le16 s_state; /* File system state */ - __le16 s_errors; /* Behaviour when detecting errors */ - __le16 s_minor_rev_level; /* minor revision level */ -/*40*/ __le32 s_lastcheck; /* time of last check */ - __le32 s_checkinterval; /* max. time between checks */ - __le32 s_creator_os; /* OS */ - __le32 s_rev_level; /* Revision level */ -/*50*/ __le16 s_def_resuid; /* Default uid for reserved blocks */ - __le16 s_def_resgid; /* Default gid for reserved blocks */ - /* - * These fields are for EXT3_DYNAMIC_REV superblocks only. - * - * Note: the difference between the compatible feature set and - * the incompatible feature set is that if there is a bit set - * in the incompatible feature set that the kernel doesn't - * know about, it should refuse to mount the filesystem. - * - * e2fsck's requirements are more strict; if it doesn't know - * about a feature in either the compatible or incompatible - * feature set, it must abort and not try to meddle with - * things it doesn't understand... - */ - __le32 s_first_ino; /* First non-reserved inode */ - __le16 s_inode_size; /* size of inode structure */ - __le16 s_block_group_nr; /* block group # of this superblock */ - __le32 s_feature_compat; /* compatible feature set */ -/*60*/ __le32 s_feature_incompat; /* incompatible feature set */ - __le32 s_feature_ro_compat; /* readonly-compatible feature set */ -/*68*/ __u8 s_uuid[16]; /* 128-bit uuid for volume */ -/*78*/ char s_volume_name[16]; /* volume name */ -/*88*/ char s_last_mounted[64]; /* directory where last mounted */ -/*C8*/ __le32 s_algorithm_usage_bitmap; /* For compression */ - /* - * Performance hints. Directory preallocation should only - * happen if the EXT3_FEATURE_COMPAT_DIR_PREALLOC flag is on. - */ - __u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/ - __u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */ - __le16 s_reserved_gdt_blocks; /* Per group desc for online growth */ - /* - * Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set. - */ -/*D0*/ __u8 s_journal_uuid[16]; /* uuid of journal superblock */ -/*E0*/ __le32 s_journal_inum; /* inode number of journal file */ - __le32 s_journal_dev; /* device number of journal file */ - __le32 s_last_orphan; /* start of list of inodes to delete */ - __le32 s_hash_seed[4]; /* HTREE hash seed */ - __u8 s_def_hash_version; /* Default hash version to use */ - __u8 s_reserved_char_pad; - __u16 s_reserved_word_pad; - __le32 s_default_mount_opts; - __le32 s_first_meta_bg; /* First metablock block group */ - __u32 s_reserved[190]; /* Padding to the end of the block */ -}; - -#ifdef __KERNEL__ -#include -#include -static inline struct ext3_sb_info * EXT3_SB(struct super_block *sb) -{ - return sb->s_fs_info; -} -static inline struct ext3_inode_info *EXT3_I(struct inode *inode) -{ - return container_of(inode, struct ext3_inode_info, vfs_inode); -} - -static inline int ext3_valid_inum(struct super_block *sb, unsigned long ino) -{ - return ino == EXT3_ROOT_INO || - ino == EXT3_JOURNAL_INO || - ino == EXT3_RESIZE_INO || - (ino >= EXT3_FIRST_INO(sb) && - ino <= le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)); -} -#else -/* Assume that user mode programs are passing in an ext3fs superblock, not - * a kernel struct super_block. This will allow us to call the feature-test - * macros from user land. */ -#define EXT3_SB(sb) (sb) -#endif - -#define NEXT_ORPHAN(inode) EXT3_I(inode)->i_dtime - -/* - * Codes for operating systems - */ -#define EXT3_OS_LINUX 0 -#define EXT3_OS_HURD 1 -#define EXT3_OS_MASIX 2 -#define EXT3_OS_FREEBSD 3 -#define EXT3_OS_LITES 4 - -/* - * Revision levels - */ -#define EXT3_GOOD_OLD_REV 0 /* The good old (original) format */ -#define EXT3_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */ - -#define EXT3_CURRENT_REV EXT3_GOOD_OLD_REV -#define EXT3_MAX_SUPP_REV EXT3_DYNAMIC_REV - -#define EXT3_GOOD_OLD_INODE_SIZE 128 - -/* - * Feature set definitions - */ - -#define EXT3_HAS_COMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) ) -#define EXT3_HAS_RO_COMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) ) -#define EXT3_HAS_INCOMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) ) -#define EXT3_SET_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask) -#define EXT3_SET_RO_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask) -#define EXT3_SET_INCOMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask) -#define EXT3_CLEAR_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask) -#define EXT3_CLEAR_RO_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask) -#define EXT3_CLEAR_INCOMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask) - -#define EXT3_FEATURE_COMPAT_DIR_PREALLOC 0x0001 -#define EXT3_FEATURE_COMPAT_IMAGIC_INODES 0x0002 -#define EXT3_FEATURE_COMPAT_HAS_JOURNAL 0x0004 -#define EXT3_FEATURE_COMPAT_EXT_ATTR 0x0008 -#define EXT3_FEATURE_COMPAT_RESIZE_INODE 0x0010 -#define EXT3_FEATURE_COMPAT_DIR_INDEX 0x0020 - -#define EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001 -#define EXT3_FEATURE_RO_COMPAT_LARGE_FILE 0x0002 -#define EXT3_FEATURE_RO_COMPAT_BTREE_DIR 0x0004 - -#define EXT3_FEATURE_INCOMPAT_COMPRESSION 0x0001 -#define EXT3_FEATURE_INCOMPAT_FILETYPE 0x0002 -#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 /* Needs recovery */ -#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV 0x0008 /* Journal device */ -#define EXT3_FEATURE_INCOMPAT_META_BG 0x0010 - -#define EXT3_FEATURE_COMPAT_SUPP EXT2_FEATURE_COMPAT_EXT_ATTR -#define EXT3_FEATURE_INCOMPAT_SUPP (EXT3_FEATURE_INCOMPAT_FILETYPE| \ - EXT3_FEATURE_INCOMPAT_RECOVER| \ - EXT3_FEATURE_INCOMPAT_META_BG) -#define EXT3_FEATURE_RO_COMPAT_SUPP (EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER| \ - EXT3_FEATURE_RO_COMPAT_LARGE_FILE| \ - EXT3_FEATURE_RO_COMPAT_BTREE_DIR) - -/* - * Default values for user and/or group using reserved blocks - */ -#define EXT3_DEF_RESUID 0 -#define EXT3_DEF_RESGID 0 - -/* - * Default mount options - */ -#define EXT3_DEFM_DEBUG 0x0001 -#define EXT3_DEFM_BSDGROUPS 0x0002 -#define EXT3_DEFM_XATTR_USER 0x0004 -#define EXT3_DEFM_ACL 0x0008 -#define EXT3_DEFM_UID16 0x0010 -#define EXT3_DEFM_JMODE 0x0060 -#define EXT3_DEFM_JMODE_DATA 0x0020 -#define EXT3_DEFM_JMODE_ORDERED 0x0040 -#define EXT3_DEFM_JMODE_WBACK 0x0060 - -/* - * Structure of a directory entry - */ -#define EXT3_NAME_LEN 255 - -struct ext3_dir_entry { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __le16 name_len; /* Name length */ - char name[EXT3_NAME_LEN]; /* File name */ -}; - -/* - * The new version of the directory entry. Since EXT3 structures are - * stored in intel byte order, and the name_len field could never be - * bigger than 255 chars, it's safe to reclaim the extra byte for the - * file_type field. - */ -struct ext3_dir_entry_2 { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __u8 name_len; /* Name length */ - __u8 file_type; - char name[EXT3_NAME_LEN]; /* File name */ -}; - -/* - * Ext3 directory file types. Only the low 3 bits are used. The - * other bits are reserved for now. - */ -#define EXT3_FT_UNKNOWN 0 -#define EXT3_FT_REG_FILE 1 -#define EXT3_FT_DIR 2 -#define EXT3_FT_CHRDEV 3 -#define EXT3_FT_BLKDEV 4 -#define EXT3_FT_FIFO 5 -#define EXT3_FT_SOCK 6 -#define EXT3_FT_SYMLINK 7 - -#define EXT3_FT_MAX 8 - -/* - * EXT3_DIR_PAD defines the directory entries boundaries - * - * NOTE: It must be a multiple of 4 - */ -#define EXT3_DIR_PAD 4 -#define EXT3_DIR_ROUND (EXT3_DIR_PAD - 1) -#define EXT3_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT3_DIR_ROUND) & \ - ~EXT3_DIR_ROUND) -#define EXT3_MAX_REC_LEN ((1<<16)-1) - -static inline unsigned ext3_rec_len_from_disk(__le16 dlen) -{ - unsigned len = le16_to_cpu(dlen); - - if (len == EXT3_MAX_REC_LEN) - return 1 << 16; - return len; -} - -static inline __le16 ext3_rec_len_to_disk(unsigned len) -{ - if (len == (1 << 16)) - return cpu_to_le16(EXT3_MAX_REC_LEN); - else if (len > (1 << 16)) - BUG(); - return cpu_to_le16(len); -} - -/* - * Hash Tree Directory indexing - * (c) Daniel Phillips, 2001 - */ - -#define is_dx(dir) (EXT3_HAS_COMPAT_FEATURE(dir->i_sb, \ - EXT3_FEATURE_COMPAT_DIR_INDEX) && \ - (EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) -#define EXT3_DIR_LINK_MAX(dir) (!is_dx(dir) && (dir)->i_nlink >= EXT3_LINK_MAX) -#define EXT3_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2 || (dir)->i_nlink == 1) - -/* Legal values for the dx_root hash_version field: */ - -#define DX_HASH_LEGACY 0 -#define DX_HASH_HALF_MD4 1 -#define DX_HASH_TEA 2 - -#ifdef __KERNEL__ - -/* hash info structure used by the directory hash */ -struct dx_hash_info -{ - u32 hash; - u32 minor_hash; - int hash_version; - u32 *seed; -}; - -#define EXT3_HTREE_EOF 0x7fffffff - -/* - * Control parameters used by ext3_htree_next_block - */ -#define HASH_NB_ALWAYS 1 - - -/* - * Describe an inode's exact location on disk and in memory - */ -struct ext3_iloc -{ - struct buffer_head *bh; - unsigned long offset; - unsigned long block_group; -}; - -static inline struct ext3_inode *ext3_raw_inode(struct ext3_iloc *iloc) -{ - return (struct ext3_inode *) (iloc->bh->b_data + iloc->offset); -} - -/* - * This structure is stuffed into the struct file's private_data field - * for directories. It is where we put information so that we can do - * readdir operations in hash tree order. - */ -struct dir_private_info { - struct rb_root root; - struct rb_node *curr_node; - struct fname *extra_fname; - loff_t last_pos; - __u32 curr_hash; - __u32 curr_minor_hash; - __u32 next_hash; -}; - -/* calculate the first block number of the group */ -static inline ext3_fsblk_t -ext3_group_first_block_no(struct super_block *sb, unsigned long group_no) -{ - return group_no * (ext3_fsblk_t)EXT3_BLOCKS_PER_GROUP(sb) + - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block); -} - -/* - * Special error return code only used by dx_probe() and its callers. - */ -#define ERR_BAD_DX_DIR -75000 - -/* - * Function prototypes - */ - -/* - * Ok, these declarations are also in but none of the - * ext3 source programs needs to include it so they are duplicated here. - */ -# define NORET_TYPE /**/ -# define ATTRIB_NORET __attribute__((noreturn)) -# define NORET_AND noreturn, - -/* balloc.c */ -extern int ext3_bg_has_super(struct super_block *sb, int group); -extern unsigned long ext3_bg_num_gdb(struct super_block *sb, int group); -extern ext3_fsblk_t ext3_new_block (handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, int *errp); -extern ext3_fsblk_t ext3_new_blocks (handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, unsigned long *count, int *errp); -extern void ext3_free_blocks (handle_t *handle, struct inode *inode, - ext3_fsblk_t block, unsigned long count); -extern void ext3_free_blocks_sb (handle_t *handle, struct super_block *sb, - ext3_fsblk_t block, unsigned long count, - unsigned long *pdquot_freed_blocks); -extern ext3_fsblk_t ext3_count_free_blocks (struct super_block *); -extern void ext3_check_blocks_bitmap (struct super_block *); -extern struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, - unsigned int block_group, - struct buffer_head ** bh); -extern int ext3_should_retry_alloc(struct super_block *sb, int *retries); -extern void ext3_init_block_alloc_info(struct inode *); -extern void ext3_rsv_window_add(struct super_block *sb, struct ext3_reserve_window_node *rsv); - -/* dir.c */ -extern int ext3_check_dir_entry(const char *, struct inode *, - struct ext3_dir_entry_2 *, - struct buffer_head *, unsigned long); -extern int ext3_htree_store_dirent(struct file *dir_file, __u32 hash, - __u32 minor_hash, - struct ext3_dir_entry_2 *dirent); -extern void ext3_htree_free_dir_info(struct dir_private_info *p); - -/* fsync.c */ -extern int ext3_sync_file (struct file *, struct dentry *, int); - -/* hash.c */ -extern int ext3fs_dirhash(const char *name, int len, struct - dx_hash_info *hinfo); - -/* ialloc.c */ -extern struct inode * ext3_new_inode (handle_t *, struct inode *, int); -extern void ext3_free_inode (handle_t *, struct inode *); -extern struct inode * ext3_orphan_get (struct super_block *, unsigned long); -extern unsigned long ext3_count_free_inodes (struct super_block *); -extern unsigned long ext3_count_dirs (struct super_block *); -extern void ext3_check_inodes_bitmap (struct super_block *); -extern unsigned long ext3_count_free (struct buffer_head *, unsigned); - - -/* inode.c */ -int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, - struct buffer_head *bh, ext3_fsblk_t blocknr); -struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *); -struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *); -int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, - sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result, - int create, int extend_disksize); - -extern struct inode *ext3_iget(struct super_block *, unsigned long); -extern int ext3_write_inode (struct inode *, int); -extern int ext3_setattr (struct dentry *, struct iattr *); -extern void ext3_delete_inode (struct inode *); -extern int ext3_sync_inode (handle_t *, struct inode *); -extern void ext3_discard_reservation (struct inode *); -extern void ext3_dirty_inode(struct inode *); -extern int ext3_change_inode_journal_flag(struct inode *, int); -extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *); -extern void ext3_truncate (struct inode *); -extern void ext3_set_inode_flags(struct inode *); -extern void ext3_get_inode_flags(struct ext3_inode_info *); -extern void ext3_set_aops(struct inode *inode); - -/* ioctl.c */ -extern int ext3_ioctl (struct inode *, struct file *, unsigned int, - unsigned long); -extern long ext3_compat_ioctl (struct file *, unsigned int, unsigned long); - -/* namei.c */ -extern int ext3_orphan_add(handle_t *, struct inode *); -extern int ext3_orphan_del(handle_t *, struct inode *); -extern int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, - __u32 start_minor_hash, __u32 *next_hash); - -/* resize.c */ -extern int ext3_group_add(struct super_block *sb, - struct ext3_new_group_data *input); -extern int ext3_group_extend(struct super_block *sb, - struct ext3_super_block *es, - ext3_fsblk_t n_blocks_count); - -/* super.c */ -extern void ext3_error (struct super_block *, const char *, const char *, ...) - __attribute__ ((format (printf, 3, 4))); -extern void __ext3_std_error (struct super_block *, const char *, int); -extern void ext3_abort (struct super_block *, const char *, const char *, ...) - __attribute__ ((format (printf, 3, 4))); -extern void ext3_warning (struct super_block *, const char *, const char *, ...) - __attribute__ ((format (printf, 3, 4))); -extern void ext3_update_dynamic_rev (struct super_block *sb); - -#define ext3_std_error(sb, errno) \ -do { \ - if ((errno)) \ - __ext3_std_error((sb), __FUNCTION__, (errno)); \ -} while (0) - -/* - * Inodes and files operations - */ - -/* dir.c */ -extern const struct file_operations ext3_dir_operations; - -/* file.c */ -extern const struct inode_operations ext3_file_inode_operations; -extern const struct file_operations ext3_file_operations; - -/* namei.c */ -extern const struct inode_operations ext3_dir_inode_operations; -extern const struct inode_operations ext3_special_inode_operations; - -/* symlink.c */ -extern const struct inode_operations ext3_symlink_inode_operations; -extern const struct inode_operations ext3_fast_symlink_inode_operations; - - -#endif /* __KERNEL__ */ - -#endif /* _LINUX_EXT3_FS_H */ diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h deleted file mode 100644 index 7894dd0..0000000 --- a/include/linux/ext3_fs_i.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/include/linux/ext3_fs_i.h - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/include/linux/minix_fs_i.h - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#ifndef _LINUX_EXT3_FS_I -#define _LINUX_EXT3_FS_I - -#include -#include -#include -#include - -/* data type for block offset of block group */ -typedef int ext3_grpblk_t; - -/* data type for filesystem-wide blocks number */ -typedef unsigned long ext3_fsblk_t; - -#define E3FSBLK "%lu" - -struct ext3_reserve_window { - ext3_fsblk_t _rsv_start; /* First byte reserved */ - ext3_fsblk_t _rsv_end; /* Last byte reserved or 0 */ -}; - -struct ext3_reserve_window_node { - struct rb_node rsv_node; - __u32 rsv_goal_size; - __u32 rsv_alloc_hit; - struct ext3_reserve_window rsv_window; -}; - -struct ext3_block_alloc_info { - /* information about reservation window */ - struct ext3_reserve_window_node rsv_window_node; - /* - * was i_next_alloc_block in ext3_inode_info - * is the logical (file-relative) number of the - * most-recently-allocated block in this file. - * We use this for detecting linearly ascending allocation requests. - */ - __u32 last_alloc_logical_block; - /* - * Was i_next_alloc_goal in ext3_inode_info - * is the *physical* companion to i_next_alloc_block. - * it the physical block number of the block which was most-recentl - * allocated to this file. This give us the goal (target) for the next - * allocation when we detect linearly ascending requests. - */ - ext3_fsblk_t last_alloc_physical_block; -}; - -#define rsv_start rsv_window._rsv_start -#define rsv_end rsv_window._rsv_end - -/* - * third extended file system inode data in memory - */ -struct ext3_inode_info { - __le32 i_data[15]; /* unconverted */ - __u32 i_flags; -#ifdef EXT3_FRAGMENTS - __u32 i_faddr; - __u8 i_frag_no; - __u8 i_frag_size; -#endif - ext3_fsblk_t i_file_acl; - __u32 i_dir_acl; - __u32 i_dtime; - - /* - * i_block_group is the number of the block group which contains - * this file's inode. Constant across the lifetime of the inode, - * it is ued for making block allocation decisions - we try to - * place a file's data blocks near its inode block, and new inodes - * near to their parent directory's inode. - */ - __u32 i_block_group; - __u32 i_state; /* Dynamic state flags for ext3 */ - - /* block reservation info */ - struct ext3_block_alloc_info *i_block_alloc_info; - - __u32 i_dir_start_lookup; -#ifdef CONFIG_EXT3_FS_XATTR - /* - * Extended attributes can be read independently of the main file - * data. Taking i_mutex even when reading would cause contention - * between readers of EAs and writers of regular file data, so - * instead we synchronize on xattr_sem when reading or changing - * EAs. - */ - struct rw_semaphore xattr_sem; -#endif -#ifdef CONFIG_EXT3_FS_POSIX_ACL - struct posix_acl *i_acl; - struct posix_acl *i_default_acl; -#endif - - struct list_head i_orphan; /* unlinked but open inodes */ - - /* - * i_disksize keeps track of what the inode size is ON DISK, not - * in memory. During truncate, i_size is set to the new size by - * the VFS prior to calling ext3_truncate(), but the filesystem won't - * set i_disksize to 0 until the truncate is actually under way. - * - * The intent is that i_disksize always represents the blocks which - * are used by this file. This allows recovery to restart truncate - * on orphans if we crash during truncate. We actually write i_disksize - * into the on-disk inode when writing inodes out, instead of i_size. - * - * The only time when i_disksize and i_size may be different is when - * a truncate is in progress. The only things which change i_disksize - * are ext3_get_block (growth) and ext3_truncate (shrinkth). - */ - loff_t i_disksize; - - /* on-disk additional length */ - __u16 i_extra_isize; - - /* - * truncate_mutex is for serialising ext3_truncate() against - * ext3_getblock(). In the 2.4 ext2 design, great chunks of inode's - * data tree are chopped off during truncate. We can't do that in - * ext3 because whenever we perform intermediate commits during - * truncate, the inode and all the metadata blocks *must* be in a - * consistent state which allows truncation of the orphans to restart - * during recovery. Hence we must fix the get_block-vs-truncate race - * by other means, so we have truncate_mutex. - */ - struct mutex truncate_mutex; - struct inode vfs_inode; -}; - -#endif /* _LINUX_EXT3_FS_I */ diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h deleted file mode 100644 index b65f028..0000000 --- a/include/linux/ext3_fs_sb.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * linux/include/linux/ext3_fs_sb.h - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/include/linux/minix_fs_sb.h - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#ifndef _LINUX_EXT3_FS_SB -#define _LINUX_EXT3_FS_SB - -#ifdef __KERNEL__ -#include -#include -#include -#include -#endif -#include - -/* - * third extended-fs super-block data in memory - */ -struct ext3_sb_info { - unsigned long s_frag_size; /* Size of a fragment in bytes */ - unsigned long s_frags_per_block;/* Number of fragments per block */ - unsigned long s_inodes_per_block;/* Number of inodes per block */ - unsigned long s_frags_per_group;/* Number of fragments in a group */ - unsigned long s_blocks_per_group;/* Number of blocks in a group */ - unsigned long s_inodes_per_group;/* Number of inodes in a group */ - unsigned long s_itb_per_group; /* Number of inode table blocks per group */ - unsigned long s_gdb_count; /* Number of group descriptor blocks */ - unsigned long s_desc_per_block; /* Number of group descriptors per block */ - unsigned long s_groups_count; /* Number of groups in the fs */ - unsigned long s_overhead_last; /* Last calculated overhead */ - unsigned long s_blocks_last; /* Last seen block count */ - struct buffer_head * s_sbh; /* Buffer containing the super block */ - struct ext3_super_block * s_es; /* Pointer to the super block in the buffer */ - struct buffer_head ** s_group_desc; - unsigned long s_mount_opt; - ext3_fsblk_t s_sb_block; - uid_t s_resuid; - gid_t s_resgid; - unsigned short s_mount_state; - unsigned short s_pad; - int s_addr_per_block_bits; - int s_desc_per_block_bits; - int s_inode_size; - int s_first_ino; - spinlock_t s_next_gen_lock; - u32 s_next_generation; - u32 s_hash_seed[4]; - int s_def_hash_version; - struct percpu_counter s_freeblocks_counter; - struct percpu_counter s_freeinodes_counter; - struct percpu_counter s_dirs_counter; - struct blockgroup_lock s_blockgroup_lock; - - /* root of the per fs reservation window tree */ - spinlock_t s_rsv_window_lock; - struct rb_root s_rsv_window_root; - struct ext3_reserve_window_node s_rsv_window_head; - - /* Journaling */ - struct inode * s_journal_inode; - struct journal_s * s_journal; - struct list_head s_orphan; - unsigned long s_commit_interval; - struct block_device *journal_bdev; -#ifdef CONFIG_JBD_DEBUG - struct timer_list turn_ro_timer; /* For turning read-only (crash simulation) */ - wait_queue_head_t ro_wait_queue; /* For people waiting for the fs to go read-only */ -#endif -#ifdef CONFIG_QUOTA - char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */ - int s_jquota_fmt; /* Format of quota to use */ -#endif -}; - -#endif /* _LINUX_EXT3_FS_SB */ diff --git a/include/linux/ext3_jbd.h b/include/linux/ext3_jbd.h deleted file mode 100644 index 8c43b13..0000000 --- a/include/linux/ext3_jbd.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - * linux/include/linux/ext3_jbd.h - * - * Written by Stephen C. Tweedie , 1999 - * - * Copyright 1998--1999 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Ext3-specific journaling extensions. - */ - -#ifndef _LINUX_EXT3_JBD_H -#define _LINUX_EXT3_JBD_H - -#include -#include -#include - -#define EXT3_JOURNAL(inode) (EXT3_SB((inode)->i_sb)->s_journal) - -/* Define the number of blocks we need to account to a transaction to - * modify one block of data. - * - * We may have to touch one inode, one bitmap buffer, up to three - * indirection blocks, the group and superblock summaries, and the data - * block to complete the transaction. */ - -#define EXT3_SINGLEDATA_TRANS_BLOCKS 8U - -/* Extended attribute operations touch at most two data buffers, - * two bitmap buffers, and two group summaries, in addition to the inode - * and the superblock, which are already accounted for. */ - -#define EXT3_XATTR_TRANS_BLOCKS 6U - -/* Define the minimum size for a transaction which modifies data. This - * needs to take into account the fact that we may end up modifying two - * quota files too (one for the group, one for the user quota). The - * superblock only gets updated once, of course, so don't bother - * counting that again for the quota updates. */ - -#define EXT3_DATA_TRANS_BLOCKS(sb) (EXT3_SINGLEDATA_TRANS_BLOCKS + \ - EXT3_XATTR_TRANS_BLOCKS - 2 + \ - 2*EXT3_QUOTA_TRANS_BLOCKS(sb)) - -/* Delete operations potentially hit one directory's namespace plus an - * entire inode, plus arbitrary amounts of bitmap/indirection data. Be - * generous. We can grow the delete transaction later if necessary. */ - -#define EXT3_DELETE_TRANS_BLOCKS(sb) (2 * EXT3_DATA_TRANS_BLOCKS(sb) + 64) - -/* Define an arbitrary limit for the amount of data we will anticipate - * writing to any given transaction. For unbounded transactions such as - * write(2) and truncate(2) we can write more than this, but we always - * start off at the maximum transaction size and grow the transaction - * optimistically as we go. */ - -#define EXT3_MAX_TRANS_DATA 64U - -/* We break up a large truncate or write transaction once the handle's - * buffer credits gets this low, we need either to extend the - * transaction or to start a new one. Reserve enough space here for - * inode, bitmap, superblock, group and indirection updates for at least - * one block, plus two quota updates. Quota allocations are not - * needed. */ - -#define EXT3_RESERVE_TRANS_BLOCKS 12U - -#define EXT3_INDEX_EXTRA_TRANS_BLOCKS 8 - -#ifdef CONFIG_QUOTA -/* Amount of blocks needed for quota update - we know that the structure was - * allocated so we need to update only inode+data */ -#define EXT3_QUOTA_TRANS_BLOCKS(sb) (test_opt(sb, QUOTA) ? 2 : 0) -/* Amount of blocks needed for quota insert/delete - we do some block writes - * but inode, sb and group updates are done only once */ -#define EXT3_QUOTA_INIT_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_INIT_ALLOC*\ - (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_INIT_REWRITE) : 0) -#define EXT3_QUOTA_DEL_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_DEL_ALLOC*\ - (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_DEL_REWRITE) : 0) -#else -#define EXT3_QUOTA_TRANS_BLOCKS(sb) 0 -#define EXT3_QUOTA_INIT_BLOCKS(sb) 0 -#define EXT3_QUOTA_DEL_BLOCKS(sb) 0 -#endif - -int -ext3_mark_iloc_dirty(handle_t *handle, - struct inode *inode, - struct ext3_iloc *iloc); - -/* - * On success, We end up with an outstanding reference count against - * iloc->bh. This _must_ be cleaned up later. - */ - -int ext3_reserve_inode_write(handle_t *handle, struct inode *inode, - struct ext3_iloc *iloc); - -int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode); - -/* - * Wrapper functions with which ext3 calls into JBD. The intent here is - * to allow these to be turned into appropriate stubs so ext3 can control - * ext2 filesystems, so ext2+ext3 systems only nee one fs. This work hasn't - * been done yet. - */ - -static inline void ext3_journal_release_buffer(handle_t *handle, - struct buffer_head *bh) -{ - journal_release_buffer(handle, bh); -} - -void ext3_journal_abort_handle(const char *caller, const char *err_fn, - struct buffer_head *bh, handle_t *handle, int err); - -int __ext3_journal_get_undo_access(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_get_write_access(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_forget(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_revoke(const char *where, handle_t *handle, - unsigned long blocknr, struct buffer_head *bh); - -int __ext3_journal_get_create_access(const char *where, - handle_t *handle, struct buffer_head *bh); - -int __ext3_journal_dirty_metadata(const char *where, - handle_t *handle, struct buffer_head *bh); - -#define ext3_journal_get_undo_access(handle, bh) \ - __ext3_journal_get_undo_access(__FUNCTION__, (handle), (bh)) -#define ext3_journal_get_write_access(handle, bh) \ - __ext3_journal_get_write_access(__FUNCTION__, (handle), (bh)) -#define ext3_journal_revoke(handle, blocknr, bh) \ - __ext3_journal_revoke(__FUNCTION__, (handle), (blocknr), (bh)) -#define ext3_journal_get_create_access(handle, bh) \ - __ext3_journal_get_create_access(__FUNCTION__, (handle), (bh)) -#define ext3_journal_dirty_metadata(handle, bh) \ - __ext3_journal_dirty_metadata(__FUNCTION__, (handle), (bh)) -#define ext3_journal_forget(handle, bh) \ - __ext3_journal_forget(__FUNCTION__, (handle), (bh)) - -int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh); - -handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks); -int __ext3_journal_stop(const char *where, handle_t *handle); - -static inline handle_t *ext3_journal_start(struct inode *inode, int nblocks) -{ - return ext3_journal_start_sb(inode->i_sb, nblocks); -} - -#define ext3_journal_stop(handle) \ - __ext3_journal_stop(__FUNCTION__, (handle)) - -static inline handle_t *ext3_journal_current_handle(void) -{ - return journal_current_handle(); -} - -static inline int ext3_journal_extend(handle_t *handle, int nblocks) -{ - return journal_extend(handle, nblocks); -} - -static inline int ext3_journal_restart(handle_t *handle, int nblocks) -{ - return journal_restart(handle, nblocks); -} - -static inline int ext3_journal_blocks_per_page(struct inode *inode) -{ - return journal_blocks_per_page(inode); -} - -static inline int ext3_journal_force_commit(journal_t *journal) -{ - return journal_force_commit(journal); -} - -/* super.c */ -int ext3_force_commit(struct super_block *sb); - -static inline int ext3_should_journal_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 1; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA) - return 1; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 1; - return 0; -} - -static inline int ext3_should_order_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 0; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 0; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA) - return 1; - return 0; -} - -static inline int ext3_should_writeback_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 0; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 0; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA) - return 1; - return 0; -} - -#endif /* _LINUX_EXT3_JBD_H */ -- 1.5.4.1.144.gdfee-dirty