From: tmhikaru@gmail.com Subject: Re: Weird I/O errors with USB hard drive not remounting filesystem readonly Date: Mon, 23 Nov 2009 03:09:19 -0500 Message-ID: <20091123080919.GA3115@roll> References: <20091113050907.GA4965@roll> <20091119160700.GC2943@atrey.karlin.mff.cuni.cz> <20091120082359.GA29538@roll> <20091120094641.GB15422@duck.suse.cz> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="liOOAslEiF7prFVr" To: Jan Kara , linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Jens Axboe , linux-scsi@vger.kernel.org, linux-ext4@vger.kernel.org Return-path: Received: from mail-qy0-f192.google.com ([209.85.221.192]:64560 "EHLO mail-qy0-f192.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750938AbZKWIRc (ORCPT ); Mon, 23 Nov 2009 03:17:32 -0500 Content-Disposition: inline In-Reply-To: <20091120094641.GB15422@duck.suse.cz> Sender: linux-ext4-owner@vger.kernel.org List-ID: --liOOAslEiF7prFVr Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Okay, finally had some time to dismantle the machine in question and inserted the backup drive without the enclosure. Now that I was able to get smartctl to give me information on what was going on, it seems there's nothing wrong with the drive itself (no remapped sectors, nothing prefail or fail going wrong, drive's smart status is good) but it's had a history of 406 (!!!) errors reported, the last five happening within the same second, all of which seem (to my untrained eye) to imply a bad IDE cable. Which means likely my USB enclosure is screwing up. To be sure, I did some extended testing with it hooked up: Tried doing a full and incremental backup of my machine with no errors reported, as well as an offline and then immediately afterwards, long test via smartctl. Nothing changed in the output. I've attached the output of smartctl at various points in the tests: the first being the initial immediate display of information at startup, the second just after the long test, and the third just after the two backups (Full and incremental) were tried. Nothing seems to shout at me in the output, I'm frankly pretty sure something's wrong with the enclosure. If it's the drive, it's not showing up here at least. I'd like your thoughts and suggestions on this. While I'm pretty sure I know what the smartctl output means, I'm always capable of being entirely wrong. Please let me know if I've misinterpreted the information. Timothy McGrath --liOOAslEiF7prFVr Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=diskstats smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823A Serial Number: 5ND3CC5A Firmware Version: 3.06 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Nov 23 00:23:54 2009 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 074 036 006 Pre-fail Always - 50613791 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 112 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 050 047 030 Pre-fail Always - 1443141758905 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 354 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 157 194 Temperature_Celsius 0x0022 027 052 000 Old_age Always - 27 (0 19 0 0) 195 Hardware_ECC_Recovered 0x001a 051 046 000 Old_age Always - 760201 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 406 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 406 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 405 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 404 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 403 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 402 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:30.579 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. --liOOAslEiF7prFVr Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=diskstats2 smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823A Serial Number: 5ND3CC5A Firmware Version: 3.06 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Nov 23 02:37:01 2009 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 053 036 006 Pre-fail Always - 73989115 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 112 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 050 047 030 Pre-fail Always - 1443142340790 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 357 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 157 194 Temperature_Celsius 0x0022 040 052 000 Old_age Always - 40 (0 19 0 0) 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 33250523 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 406 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 406 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 405 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 404 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 403 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 402 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:30.579 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended captive Completed without error 00% 356 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. --liOOAslEiF7prFVr Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=diskstats3 smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823A Serial Number: 5ND3CC5A Firmware Version: 3.06 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Nov 23 02:42:34 2009 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 051 036 006 Pre-fail Always - 72983290 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 112 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 050 047 030 Pre-fail Always - 1443142359378 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 357 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 157 194 Temperature_Celsius 0x0022 040 052 000 Old_age Always - 40 (0 19 0 0) 195 Hardware_ECC_Recovered 0x001a 049 046 000 Old_age Always - 48607152 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 406 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 406 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 405 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 404 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 403 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:36.934 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA Error 402 occurred at disk power-on lifetime: 160 hours (6 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 07 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 03 08 00 00 00 e0 00 00:00:30.579 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.511 READ DMA c8 03 08 00 00 00 e0 00 00:00:36.087 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.663 READ DMA c8 03 08 00 00 00 e0 00 00:00:35.240 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended captive Completed without error 00% 356 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. --liOOAslEiF7prFVr--