From: Jan Kara Subject: Re: [PATCH v2 1/7] Adding support to freeze and unfreeze a journal Date: Tue, 10 Jan 2012 22:31:04 +0100 Message-ID: <20120110213104.GI4516@quack.suse.cz> References: <1323367477-21685-1-git-send-email-kamal@canonical.com> <1323367477-21685-2-git-send-email-kamal@canonical.com> <4F0C9D87.8010006@sandeen.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Kamal Mostafa , Jan Kara , Alexander Viro , Andreas Dilger , Matthew Wilcox , Randy Dunlap , Theodore Tso , linux-doc@vger.kernel.org, linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org, Surbhi Palande , Valerie Aurora , Christopher Chaltain , "Peter M. Petrakis" , Mikulas Patocka , Surbhi Palande To: Eric Sandeen Return-path: Content-Disposition: inline In-Reply-To: <4F0C9D87.8010006@sandeen.net> Sender: linux-doc-owner@vger.kernel.org List-Id: linux-ext4.vger.kernel.org On Tue 10-01-12 14:20:23, Eric Sandeen wrote: > On 12/8/11 12:04 PM, Kamal Mostafa wrote: > > From: Surbhi Palande > > > > The journal should be frozen when a filesystem freezes. What this means is > > that until the filesystem is thawed again, no new transactions should be > > accepted by the journal. When the filesystem thaws, inturn it should thaw the > > journal and this should allow the journal to resume accepting new > > transactions. While the the filesystem has frozen the journal, the clients of > > the journal on calling jbd2_journal_start() will sleep on a wait queue. > > Thawing the journal will wake up the sleeping clients and journalling can > > progress normally. > > > > An example of the race condition that can happen without this patch is as > > follows: > > > > Say the filesystem is thawed when we begin. Let tx be the time at unit x > > > > P1: Process doing an aio write > > t1) ext4_file_write() > > t2) generic_file_aio_write() > > t3) __generic_file_aio_write() > > // filesystem is not frozen, so we do not block in the next check. > > t4) vfs_check_frozen() > > t5) generic_write_checks() > > ----------------- Prempted------------------ > > > > P2: Process that does filesystem freeze > > > > t6) freeze_super() > > t7) sync_filesystem() > > t8) sync_blockdev() > > t9) sb->s_op->freeze_fs() (= ext4_freeze) > > t10) jbd2_journal_lock_updates() > > t11) jbd2_journal_flush() > > // Need to unlock the journal before returning to user space. > > t12) jbd2_journal_unlock_updates() > > // Journal is unlocked and so we can start accepting new transactions now. > > > > // freezing process completes execution. Page cache is now clean and should > > // remain clean till the filesystem is frozen. > > -------------------------------------------- > > > > P1: writing process gets the control back > > t13) generic_file_buffered_write() > > t14) generic_perform_write() > > t15) a_ops->write_begin() (= ext4_write_begin) > > t16) ext4_journal_start() > > // New handle is started. We do not block here! Write continues > > // dirtying the page cache while the filesystem is frozen! > > Hrm let me think through this a little more; we actually do: > > t16) ext4_journal_start() > t17) ext4_journal_start_sb() > t18) handle = ext4_journal_current_handle(); > t19) if (!handle) vfs_check_frozen() > t20) ... jbd2_journal_start() Ah, right. I forgot. > So actually we *do* block new handles, but let *existing* ones > continue (see commits 6b0310fbf087ad6e9e3b8392adca97cd77184084 > and be4f27d324e8ddd57cc0d4d604fe85ee0425cba9) > > So your assertion that a new handle is started is incorrect > in general, isn't it? So then does the fix seem necessary? > Or, at least, in the fashion below - maybe we need to just make > sure all started handles complete before the unlock_updates? > Or am I missing something...? Well, the problem with running operations and freezing is more fundamental I believe. See my email http://marc.info/?l=linux-fsdevel&m=132585911925796&w=2 So I believe we'll need some better exclusion mechanism already in VFS. Honza > > BugLink: https://bugs.launchpad.net/bugs/897421 > > Signed-off-by: Surbhi Palande > > Acked-by: Jan Kara > > Reviewed-by: Andreas Dilger > > Cc: Kamal Mostafa > > Tested-by: Peter M. Petrakis > > Signed-off-by: Kamal Mostafa > > --- > > fs/jbd2/journal.c | 1 + > > fs/jbd2/transaction.c | 42 ++++++++++++++++++++++++++++++++++++++++++ > > include/linux/jbd2.h | 7 +++++++ > > 3 files changed, 50 insertions(+), 0 deletions(-) > > > > diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c > > index 0fa0123..f0170cc 100644 > > --- a/fs/jbd2/journal.c > > +++ b/fs/jbd2/journal.c > > @@ -894,6 +894,7 @@ static journal_t * journal_init_common (void) > > init_waitqueue_head(&journal->j_wait_checkpoint); > > init_waitqueue_head(&journal->j_wait_commit); > > init_waitqueue_head(&journal->j_wait_updates); > > + init_waitqueue_head(&journal->j_wait_frozen); > > mutex_init(&journal->j_barrier); > > mutex_init(&journal->j_checkpoint_mutex); > > spin_lock_init(&journal->j_revoke_lock); > > diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c > > index a0e41a4..340ee35 100644 > > --- a/fs/jbd2/transaction.c > > +++ b/fs/jbd2/transaction.c > > @@ -173,6 +173,17 @@ repeat: > > journal->j_barrier_count == 0); > > goto repeat; > > } > > + /* Don't let a new handle start when a journal is frozen. > > + * jbd2_journal_freeze calls jbd2_journal_unlock_updates() only after > > + * the j_flags indicate that the journal is frozen. So if the > > + * j_barrier_count is 0, then check if this was made 0 by the freezing > > + * process > > + */ > > + if (journal->j_flags & JBD2_FROZEN) { > > + read_unlock(&journal->j_state_lock); > > + wait_event(journal->j_wait_frozen, (journal->j_flags & JBD2_FROZEN)); > > + goto repeat; > > + } > > > > if (!journal->j_running_transaction) { > > read_unlock(&journal->j_state_lock); > > @@ -492,6 +503,37 @@ int jbd2_journal_restart(handle_t *handle, int nblocks) > > } > > EXPORT_SYMBOL(jbd2_journal_restart); > > > > +int jbd2_journal_freeze(journal_t *journal) > > +{ > > + int error = 0; > > + /* Now we set up the journal barrier. */ > > + jbd2_journal_lock_updates(journal); > > + > > + /* > > + * Don't clear the needs_recovery flag if we failed to flush > > + * the journal. > > + */ > > + error = jbd2_journal_flush(journal); > > + if (error >= 0) { > > + write_lock(&journal->j_state_lock); > > + journal->j_flags |= JBD2_FROZEN; > > + write_unlock(&journal->j_state_lock); > > + } > > + jbd2_journal_unlock_updates(journal); > > + return error; > > +} > > +EXPORT_SYMBOL(jbd2_journal_freeze); > > + > > +void jbd2_journal_thaw(journal_t * journal) > > +{ > > + write_lock(&journal->j_state_lock); > > + journal->j_flags &= ~JBD2_FROZEN; > > + write_unlock(&journal->j_state_lock); > > + wake_up(&journal->j_wait_frozen); > > +} > > +EXPORT_SYMBOL(jbd2_journal_thaw); > > + > > + > > /** > > * void jbd2_journal_lock_updates () - establish a transaction barrier. > > * @journal: Journal to establish a barrier on. > > diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h > > index 2092ea2..bfa0752 100644 > > --- a/include/linux/jbd2.h > > +++ b/include/linux/jbd2.h > > @@ -658,6 +658,7 @@ jbd2_time_diff(unsigned long start, unsigned long end) > > * @j_wait_checkpoint: Wait queue to trigger checkpointing > > * @j_wait_commit: Wait queue to trigger commit > > * @j_wait_updates: Wait queue to wait for updates to complete > > + * @j_wait_frozen: Wait queue to wait for journal to thaw > > * @j_checkpoint_mutex: Mutex for locking against concurrent checkpoints > > * @j_head: Journal head - identifies the first unused block in the journal > > * @j_tail: Journal tail - identifies the oldest still-used block in the > > @@ -775,6 +776,9 @@ struct journal_s > > /* Wait queue to wait for updates to complete */ > > wait_queue_head_t j_wait_updates; > > > > + /* Wait queue to wait for journal to thaw*/ > > + wait_queue_head_t j_wait_frozen; > > + > > /* Semaphore for locking against concurrent checkpoints */ > > struct mutex j_checkpoint_mutex; > > > > @@ -953,6 +957,7 @@ struct journal_s > > #define JBD2_ABORT_ON_SYNCDATA_ERR 0x040 /* Abort the journal on file > > * data write error in ordered > > * mode */ > > +#define JBD2_FROZEN 0x080 /* Journal thread frozen along with filesystem */ > > > > /* > > * Function declarations for the journaling transaction and buffer > > @@ -1060,6 +1065,8 @@ extern void jbd2_journal_invalidatepage(journal_t *, > > struct page *, unsigned long); > > extern int jbd2_journal_try_to_free_buffers(journal_t *, struct page *, gfp_t); > > extern int jbd2_journal_stop(handle_t *); > > +extern int jbd2_journal_freeze(journal_t *); > > +extern void jbd2_journal_thaw(journal_t *); > > extern int jbd2_journal_flush (journal_t *); > > extern void jbd2_journal_lock_updates (journal_t *); > > extern void jbd2_journal_unlock_updates (journal_t *); > -- Jan Kara SUSE Labs, CR