From: Jan Kara Subject: Re: [PATCH] ext4: add noorlov parameter to avoid spreading of directory inodes Date: Wed, 2 Oct 2013 16:47:59 +0200 Message-ID: <20131002144759.GB32181@quack.suse.cz> References: <20131001160817.GA2295@kvack.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Theodore Ts'o , Andreas Dilger , linux-ext4@vger.kernel.org To: Benjamin LaHaise Return-path: Received: from cantor2.suse.de ([195.135.220.15]:50066 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752853Ab3JBOsC (ORCPT ); Wed, 2 Oct 2013 10:48:02 -0400 Content-Disposition: inline In-Reply-To: <20131001160817.GA2295@kvack.org> Sender: linux-ext4-owner@vger.kernel.org List-ID: On Tue 01-10-13 12:08:17, Benjamin LaHaise wrote: > While investigating a performance regression during migration of the > Solace product from an older kernel running ext3 to a 3.x kernel running > ext4, the change in allocation policies between ext3 and ext4 were found > to have caused a 10-50% decrease (depending on the test) in I/O > throughput. In order to extract more parallelism from the filesystem, > this particular use-case has 100 subdirectories off of the root > directory of an ext4 filesystem in which files are created in a > round-robin fashion. The subdirectories are used in order to increase > the number of metadata operations that can occur in parallel. With the > older setup on ext3, files were created sequentially, while using ext4 > resulted in the files being spread out across block groups. > > To avoid this change in allocation policies, introduce the noorlov mount > parameter to ext4. This parameter changes allocation policy such that new > subdirectories in the filesystem are allocated in the same block group > as the parent subdirectory. With the subdirectories in the same block > group, the allocation policy once again results in files being laid out > sequentially on disk, restoring performance. Frankly, I'm not very fond of a mount option for tweaking inode allocation policy. OTOH the regression is large enough that we should address it somehow. So I suppose if your application doesn't use the root directory as a base but some other directory on ext4 filesystem, everything is OK, isn't it? Because the root directory is special in the Orlov allocator and that is where the randomness happens. If I'm right about the source of the problem, we could use TOPDIR inode flag to handle this. Currently Orlov allocator treats directories with TOPDIR flag set the same way as the root directory. Sadly the root directory itself is hardcoded in the allocator but we could remove that just keep the check for TOPDIR flag. To handle backward compatibility, we would set TOPDIR for root inode during mount first time we mount the fs with the new kernel (needs some flag in the superblock). Hum, so when I wrote this I'm not sure this is that much better than a mount option. But it's a possibility :). What do others think? Honza > > Signed-off-by: Benjamin LaHaise > Signed-off-by: Benjamin LaHaise > > diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h > index af815ea..3894ab0 100644 > --- a/fs/ext4/ext4.h > +++ b/fs/ext4/ext4.h > @@ -985,6 +985,8 @@ struct ext4_inode_info { > #define EXT4_MOUNT2_STD_GROUP_SIZE 0x00000002 /* We have standard group > size of blocksize * 8 > blocks */ > +#define EXT4_MOUNT2_NO_ORLOV 0x00000004 /* Disable orlov for inode > + allocation */ > > #define clear_opt(sb, opt) EXT4_SB(sb)->s_mount_opt &= \ > ~EXT4_MOUNT_##opt > diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c > index 137193f..2b1b4ee 100644 > --- a/fs/ext4/ialloc.c > +++ b/fs/ext4/ialloc.c > @@ -745,7 +745,7 @@ struct inode *__ext4_new_inode(handle_t *handle, struct inode *dir, > goto got_group; > } > > - if (S_ISDIR(mode)) > + if (!test_opt2(sb, NO_ORLOV) && S_ISDIR(mode)) > ret2 = find_group_orlov(sb, dir, &group, mode, qstr); > else > ret2 = find_group_other(sb, dir, &group, mode); > diff --git a/fs/ext4/super.c b/fs/ext4/super.c > index 2c2e6cb..d0bdcd7 100644 > --- a/fs/ext4/super.c > +++ b/fs/ext4/super.c > @@ -1143,7 +1143,7 @@ enum { > Opt_inode_readahead_blks, Opt_journal_ioprio, > Opt_dioread_nolock, Opt_dioread_lock, > Opt_discard, Opt_nodiscard, Opt_init_itable, Opt_noinit_itable, > - Opt_max_dir_size_kb, > + Opt_max_dir_size_kb, Opt_noorlov, > }; > > static const match_table_t tokens = { > @@ -1163,6 +1163,7 @@ static const match_table_t tokens = { > {Opt_debug, "debug"}, > {Opt_removed, "oldalloc"}, > {Opt_removed, "orlov"}, > + {Opt_noorlov, "noorlov"}, > {Opt_user_xattr, "user_xattr"}, > {Opt_nouser_xattr, "nouser_xattr"}, > {Opt_acl, "acl"}, > @@ -1341,6 +1342,7 @@ static const struct mount_opts { > int token; > int mount_opt; > int flags; > + int mount_opt2; > } ext4_mount_opts[] = { > {Opt_minix_df, EXT4_MOUNT_MINIX_DF, MOPT_SET}, > {Opt_bsd_df, EXT4_MOUNT_MINIX_DF, MOPT_CLEAR}, > @@ -1417,6 +1419,7 @@ static const struct mount_opts { > {Opt_jqfmt_vfsv0, QFMT_VFS_V0, MOPT_QFMT}, > {Opt_jqfmt_vfsv1, QFMT_VFS_V1, MOPT_QFMT}, > {Opt_max_dir_size_kb, 0, MOPT_GTE0}, > + {Opt_noorlov, 0, MOPT_SET, EXT4_MOUNT2_NO_ORLOV}, > {Opt_err, 0, 0} > }; > > @@ -1601,6 +1604,7 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token, > } else { > clear_opt(sb, DATA_FLAGS); > sbi->s_mount_opt |= m->mount_opt; > + sbi->s_mount_opt2 |= m->mount_opt2; > } > #ifdef CONFIG_QUOTA > } else if (m->flags & MOPT_QFMT) { > @@ -1630,10 +1634,13 @@ static int handle_mount_opt(struct super_block *sb, char *opt, int token, > WARN_ON(1); > return -1; > } > - if (arg != 0) > + if (arg != 0) { > sbi->s_mount_opt |= m->mount_opt; > - else > + sbi->s_mount_opt2 |= m->mount_opt2; > + } else { > sbi->s_mount_opt &= ~m->mount_opt; > + sbi->s_mount_opt2 &= ~m->mount_opt2; > + } > } > return 1; > } > @@ -1777,11 +1784,15 @@ static int _ext4_show_options(struct seq_file *seq, struct super_block *sb, > if (((m->flags & (MOPT_SET|MOPT_CLEAR)) == 0) || > (m->flags & MOPT_CLEAR_ERR)) > continue; > - if (!(m->mount_opt & (sbi->s_mount_opt ^ def_mount_opt))) > + if (!(m->mount_opt & (sbi->s_mount_opt ^ def_mount_opt)) && > + !(m->mount_opt2 & sbi->s_mount_opt2)) > continue; /* skip if same as the default */ > - if ((want_set && > - (sbi->s_mount_opt & m->mount_opt) != m->mount_opt) || > - (!want_set && (sbi->s_mount_opt & m->mount_opt))) > + if (want_set && > + (((sbi->s_mount_opt & m->mount_opt) != m->mount_opt) || > + ((sbi->s_mount_opt2 & m->mount_opt2) != m->mount_opt2))) > + continue; /* select Opt_noFoo vs Opt_Foo */ > + if (!want_set && ((sbi->s_mount_opt & m->mount_opt) || > + (sbi->s_mount_opt2 & m->mount_opt2))) > continue; /* select Opt_noFoo vs Opt_Foo */ > SEQ_OPTS_PRINT("%s", token2str(m->token)); > } > -- > To unsubscribe from this list: send the line "unsubscribe linux-ext4" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Jan Kara SUSE Labs, CR