From: =?ISO-8859-15?Q?Luk=E1=A8_Czerner?= Subject: Re: Proposal draft for data checksumming for ext4 Date: Mon, 24 Mar 2014 02:59:30 +0100 (CET) Message-ID: References: <20140320175950.GJ9070@birch.djwong.org> Mime-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="8323328-610756161-1395626374=:2047" Cc: linux-ext4@vger.kernel.org, "Theodore Ts'o" To: "Darrick J. Wong" Return-path: Received: from mx1.redhat.com ([209.132.183.28]:40129 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750878AbaCXB7j (ORCPT ); Sun, 23 Mar 2014 21:59:39 -0400 In-Reply-To: <20140320175950.GJ9070@birch.djwong.org> Sender: linux-ext4-owner@vger.kernel.org List-ID: This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. --8323328-610756161-1395626374=:2047 Content-Type: TEXT/PLAIN; charset=utf-8 Content-Transfer-Encoding: 8BIT On Thu, 20 Mar 2014, Darrick J. Wong wrote: > Date: Thu, 20 Mar 2014 10:59:50 -0700 > From: Darrick J. Wong > To: Lukáš Czerner > Cc: linux-ext4@vger.kernel.org, Theodore Ts'o > Subject: Re: Proposal draft for data checksumming for ext4 > > On Thu, Mar 20, 2014 at 05:40:06PM +0100, Lukáš Czerner wrote: > > Hi all, > > > > I've started thinking about implementing data checksumming for ext4 file > > system. This is not meant to be a formal proposal or a definitive design > > description since I am not that far yet, but just a few ideas to start > > the discussion and trying to figure out what the best design for data > > checksumming in ext4 might be. > > > > > > > > Data checksumming for ext4 > > Version 0.1 > > March 20, 2014 > > > > > > Goal > > ==== > > > > The goal is to implement data checksumming for ext4 file system in order > > to improve data integrity and increase protection against silent data > > corruption while maintaining reasonable performance and usability of the > > file system. > > > > While data checksums can be certainly used in different ways, for example > > data deduplication this proposal is very much focused on data integrity. > > > > > > Checksum function > > ================= > > > > By default I plan to use crc32c checksum, but I do not see a reason why not > > not to be able to support different checksum function. Also by default the > > checksum size should be 32 bits, but the plan is to make the format > > flexible enough to be able to support different checksum sizes. > > Were you thinking of allowing the use of different functions for data and > metadata checksums? Hi Darrick, I have not, but I think that this would be very easy to do if we can agree that it's good to have. > > > Checksumming and Validating > > =========================== > > > > On write checksums on the data blocks need to be computed right before its > > bio is submitted and written out as metadata to its position (see bellow) > > after the bio completes (similarly as we do unwritten extent conversion > > today). > > > > Similarly on read checksums needs to be computed after the bio completes > > and compared with the stored values to verify that the data is intact. > > > > All of this should be done using workqueues (Concurrency Managed > > Workqueues) so we do not block the other operations and to spread the > > checksum computation and comparison across CPUs. One wq for reads and one > > for writes. Specific setup of the wq such as priority, or concurrency limits > > should be decided later based on the performance evaluation. > > > > While we already have ext4 infrastructure to submit bios in > > fs/ext4/page-io.c where the entry point is ext4_bio_write_page() we would > > need the same for reads to be able to provide ext4 specific hooks for > > io completion. > > > > > > Where to store the checksums > > ============================ > > > > While the problems above are pretty straightforward when it comes to the > > design, actually storing and retrieving the data checksums from to/from > > the ext4 format requires much more thought to be efficient enough and play > > nicely with the overall ext4 design while trying not to be too intrusive. > > > > I came up with several ideas about where to store and how to access data > > checksums. While some of the ideas might not be the most viable options, > > it's still interesting to think about the advantages and disadvantages of > > each particular solution. > > > > a) Static layout > > ---------------- > > > > This scheme fits perfectly into the ext4 design. Checksum blocks > > would be preallocated the same way as we do with inode tables for example. > > Each block group should have it's own contiguous region of checksum blocks > > to be able to store checksums for bocks from entire block group it belongs > > to. Each checksum block would contain header including checksum of the > > checksum block. > > > > We still have unused 4 Bytes in the ext4_group_desc structure, so storing > > a block number for the checksum table should not be a problem. > > What if you have a 64bit filesystem? Do you have some strategy in mind to work > around that? What about the snapshot exclusion bitmap field? Afaict that > never went in, so perhaps that field could be reused? Yes we can use the exclusion bitmap field. I think that would not be a problem. We could also use addressing from the start of the block group and keep the checksum table in the block group. > > > Finding a checksum location of each block in the block group should be done > > in O(1) time, which is very good. Other advantage is a locality with the > > data blocks in question since both resides in the same block group. > > > > Big disadvantage is the fact that this solution is not very flexibile which > > comes from the fact that the location of "checksum table" is statically > > located at a precise position in the file system at mkfs time. > > Having a big dumb block of checksums would be easier to prefetch from disk for > fsck and kernel driver, rather than having to dig through some tree structure. > (More on that below) I agree, it is also much more robust solution than having a tree. > > > There are also other problems we should be concerned with. Ext4 file system > > does have support for metadata checksumming so all the metadata does have > > its own checksum. While we can avoid unnecessarily checksuming inodes, group > > descriptors and basicall all statically positioned metadata, we still have > > dynamically allocated metadata blocks such as extent blocks. These block > > do not have to be checksummed but we would still have space reserved in the > > checksum table. > > Don't forget directory blocks--they (should) have checksums too, so you can > skip those. > > I wonder, could we use this table to store backrefs too? It would make the > table considerably larger, but then we could (potentially) reconstruct broken > extent trees. Definitely, that is one thing I did not discussed here, but I'd like to have the checksum blocks self descriptive so we can alway know where it belongs and who is the owner. So yes, having a backrefs is really good idea. > > > I think that we should be able to make this feature without introducing any > > incompatibility, but it would make more sense to make it RO compatible only > > so we can preserve the checksums. But that's up to the implementation. > > I think you'd have to have it be rocompat, otherwise you could write data with > an old kernel and a new kernel would freak out. Yes, I think that we could make it not freak out, but we would loose the checksums, so for that I think that having this rocompat will probably make more sense. Thanks! -Lukas > > > b) Special inode > > ---------------- > > > > This is very "lazy" solution and should not be difficult to implement. The > > idea is to have a special inode which would store the checksum blocks in > > it's own data blocks. > > > > The big disadvantage is that we would have to walk the extent tree twice for > > each read, or write. There is not much to say about this solution other than > > again we can make this feature without introducing any incompatibility, but > > it would probably make more sense to make it RO compatible to preserve the > > checksums. > > > > c) Per inode checksum b-tree > > ---------------------------- > > > > See d) > > > > d) Per block group checksum b-tree > > ---------------------------------- > > > > Those two schemes are very similar in that both would store checksum in a > > b-tree with a block number (we could use logical block number in per inode > > tree) as a key. Obviously finding a checksum would be in logarithmic time, > > while the size of the tree would be possibly much bigger in the per-inode > > case. In per block group case we will have much smaller boundary of > > number of checksum blocks stored. > > > > This and the fact that we would have to have at least one checksum block > > per inode (which would be wasteful in the case of small files) is making per > > block group solution much more viable. However the major disadvantage of > > per block group solution is that the checksum tree would create a source of > > contention when reading/writing from/to a different inodes in the same block > > group. This might be mitigated by having a worker thread per a range of block > > groups - but it might still be a bottleneck. > > > > Again we still have 4 Bytes in ext4_group_desc to store the pointer to the > > root of the tree. While the ext4_inode structure have 4Bytes of > > i_obso_faddr but that's not enough. So we would have to figure out where to > > store it - we could possibly abuse i_block to store it along with the extent > > nodes. > > I think(?) your purpose in using either a special inode or a btree to store the > checksums is to avoid wasting checksum blocks on things that are already > checksummed? I'm not sure that we'd save enough space to justify the extra > processing. > > --D > > > File system scrub > > ================= > > > > While this is certainly a feature which we want to have in both userspace > > e2fsprogs and kernel I do not have any design notes at this stage. > > > > > > > > > > I am sure that there are other possibilities and variants of those design > > ideas, but I think that this should be enough to have a discussion started. > > As I is not I think that the most viable option is d) that is, per block > > group checksum tree, which gives us enough flexibility while not being too > > complex solution. > > > > I'll try to update this description as it will be getting more concrete > > structure and I hope that we will have some productive discussion about > > this at LSF. > > > > Thanks! > > -Lukas > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-ext4" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > --8323328-610756161-1395626374=:2047--