Received-SPF: pass (google.com: domain of linux-ext4-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Lukas Czerner <lczerner@redhat.com>
To:     fstests@vger.kernel.org
Cc:     linux-ext4@vger.kernel.org
Subject: [PATCH v3] ext4: add test for all ext4/ext3/ext2 mount options
Date:   Tue, 26 Oct 2021 11:31:12 +0200
Message-Id: <20211026093112.26221-1-lczerner@redhat.com>
In-Reply-To: <20211020121226.15236-1-lczerner@redhat.com>
References: <20211020121226.15236-1-lczerner@redhat.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add test to validate that all the ext4, ext3 and ext2 are properly
recognized, validate and applied to avoid regressions as ext4 moves to
the new mount API.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
---
V2: Move minimum kernel version requirement up to 5.12
    Rewrite kernel_gte() to work correctly
V3: Rename functions to not start with _

 tests/ext4/053     | 611 +++++++++++++++++++++++++++++++++++++++++++++
 tests/ext4/053.out |   2 +
 2 files changed, 613 insertions(+)
 create mode 100755 tests/ext4/053
 create mode 100644 tests/ext4/053.out

diff --git a/tests/ext4/053 b/tests/ext4/053
new file mode 100755
index 00000000..95b1c998
--- /dev/null
+++ b/tests/ext4/053
@@ -0,0 +1,611 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2021 Red Hat, Inc., Lukas Czerner <lczerner@redhat.com>.
+#
+# FS QA Test 053
+#
+# Sanity check of ext4 mount options
+#
+. ./common/preamble
+_begin_fstest auto mount
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+	if [ -n "$LOOP_LOGDEV" ];then
+		_destroy_loop_device $LOOP_LOGDEV 2>/dev/null
+	fi
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+echo "Silence is golden."
+
+SIZE=$((1024 * 1024))	# 1GB in KB
+LOGSIZE=$((10 *1024))	# 10MB in KB
+
+_supported_fs ext2 ext3 ext4
+_require_scratch_size $SIZE
+_require_quota
+_require_loop
+_require_command "$TUNE2FS_PROG" tune2fs
+MKE2FS_PROG=$(type -P mke2fs)
+_require_command "$MKE2FS_PROG" mke2fs
+
+LOG=""
+print_log() {
+	LOG="$LOG $@"
+}
+
+KERNEL_VERSION=`uname -r | cut -d'.' -f1,2`
+KERNEL_MAJ=${KERNEL_VERSION%.*}
+KERNEL_MIN=${KERNEL_VERSION#*.}
+
+kernel_gte() {
+	major=${1%.*}
+	minor=${1#*.}
+
+	if [ $KERNEL_MAJ -gt $major ]; then
+		return 0
+	elif [[ $KERNEL_MAJ -eq $major && $KERNEL_MIN -ge $minor ]]; then
+		return 0
+	fi
+	return 1
+}
+
+
+# The aim here is to keep the mount options behaviour stable going forward
+# so there is not much point in testing older kernels.
+kernel_gte 5.12 || _notrun "This test is only relevant for kernel versions 5.12 and higher"
+
+IGNORED="remount,defaults,ignored,removed"
+CHECK_MINFO="lazytime,noatime,nodiratime,noexec,nosuid,ro"
+ERR=0
+
+test_mnt() {
+	findmnt -n $SCRATCH_DEV > /dev/null 2>&1
+	[ $? -ne 0 ] && return $?
+
+	if [ $# -eq 1 ]; then
+		OPTS=$1
+	elif [ $# -eq 2 ]; then
+		OPTS=$2
+	else
+		return 0
+	fi
+
+	print_log "checking \"$OPTS\" "
+	# test options in /proc/fs/ext4/dev/options
+	(
+	ret=0
+	IFS=','
+	for option in $OPTS; do
+		if echo $IGNORED | grep -w $option; then
+			continue
+		fi
+
+		[ $option = "noload" ] && option="norecovery"
+
+		if [[ $option = ^* ]]; then
+			expected=1
+		else
+			expected=0
+		fi
+		option=${option#^}
+
+		if echo $CHECK_MINFO | grep -w $option; then
+			findmnt -n -o OPTIONS $SCRATCH_DEV | grep $option
+			ret=$?
+		else
+			grep $option /proc/fs/ext4/$(_short_dev $SCRATCH_DEV)/options
+			ret=$?
+		fi
+
+		if [ $ret -ne $expected ]; then
+			exit 1
+		fi
+	done
+	) > /dev/null 2>&1
+	return $?
+}
+
+fail() {
+	print_log "   FAILED"
+	ERR=$((ERR+1))
+	echo $LOG | tee -a $seqres.full
+	LOG=""
+}
+
+ok() {
+	print_log "   OK"
+	echo $LOG >> $seqres.full
+	LOG=""
+}
+
+simple_mount() {
+	_mount $* >> $seqres.full 2>&1
+}
+
+# $1 - can hold -n option, if it does argumetns are shifted
+# $1 - options to test
+# $2 - if provided it's the option string to check for
+do_mnt() {
+	device=$SCRATCH_DEV
+	# If -n argument is provided do not specify $SCRATCH_DEV
+	# usefull for remount
+	if [ "$1" == "-n" ]; then
+		unset device
+		shift
+	fi
+
+	if [ -z "$1" ]; then
+		simple_mount $device $SCRATCH_MNT
+		ret=$?
+	else
+		simple_mount -o $1 $device $SCRATCH_MNT
+		ret=$?
+	fi
+	if [ $ret -eq 0 ]; then
+		test_mnt $1 $2
+		ret=$?
+		[ $ret -ne 0 ] && print_log "(not found)"
+	else
+		print_log "(failed mount)"
+	fi
+
+	return $ret
+}
+
+not_mnt() {
+	# We don't need -t not not_ variant
+	if [ "$1" == "-t" ]; then
+		shift
+	fi
+
+	print_log "SHOULD FAIL mounting $fstype \"$1\" "
+	do_mnt $@
+	if [ $? -eq 0 ]; then
+		fail
+	else
+		ok
+	fi
+	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+}
+
+mnt_only() {
+	print_log "mounting $fstype \"$1\" "
+	do_mnt $@
+	if [ $? -ne 0 ]; then
+		fail
+	else
+		ok
+	fi
+}
+
+mnt() {
+	# Do we need to run the tune2fs mount option test ?
+	t2fs=0
+	if [ "$1" == "-t" ]; then
+		t2fs=1
+		shift
+	fi
+
+	mnt_only $*
+	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+
+	[ "$t2fs" -eq 0 ] && return
+
+	op_set=$1
+	if [ $# -eq 1 ]; then
+		check=$1
+	elif [ $# -eq 2 ]; then
+		check=$2
+	else
+		return 0
+	fi
+
+	# some options need translation for tune2fs
+	op_set=$(echo $op_set | sed -e 's/data=journal/journal_data/' \
+				    -e 's/data=ordered/journal_data_ordered/' \
+				    -e 's/data=writeback/journal_data_writeback/')
+	$TUNE2FS_PROG -o $op_set $SCRATCH_DEV > /dev/null 2>&1
+	mnt_only "defaults" $check
+	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+	if [ "$op_set" = ^* ]; then
+		op_set=${op_set#^}
+	else
+		op_set="^${op_set}"
+	fi
+	$TUNE2FS_PROG -o $op_set $SCRATCH_DEV > /dev/null 2>&1
+}
+
+# $1 - options to mount with
+# $2 - options to remount with
+remount() {
+	# First do this specifying both dev and mnt
+	print_log "mounting $fstype \"$1\" "
+	do_mnt $1
+	[ $? -ne 0 ] && fail && return
+	print_log "remounting \"$2\" "
+	do_mnt remount,$2 $3
+	if [ $? -ne 0 ]; then
+		fail
+		$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+		return
+	else
+		ok
+	fi
+	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+
+	# Now just specify mnt
+	print_log "mounting $fstype \"$1\" "
+	do_mnt $1
+	[ $? -ne 0 ] && fail && return
+	print_log "remounting (MNT ONLY) \"$2\" "
+	do_mnt -n remount,$2 $3
+	if [ $? -ne 0 ]; then
+		fail
+	else
+		ok
+	fi
+
+	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+}
+
+# $1 - options to mount with, or -r argument
+# $2 - options to remount with
+not_remount_noumount() {
+	remount_only=0
+	# If -r is specified we're going to do remount only
+	if [ "$1" == "-r" ]; then
+		remount_only=1
+		# Dont need shift since first argument would
+		# have been consumed by mount anyway
+	fi
+
+	if [ $remount_only -eq 0 ]; then
+		print_log "mounting $fstype \"$1\" "
+		do_mnt $1
+		[ $? -ne 0 ] && fail && return
+	fi
+	print_log "SHOULD FAIL remounting $fstype \"$2\" "
+	do_mnt remount,$2 $3
+	if [ $? -eq 0 ]; then
+		fail
+	else
+		ok
+	fi
+
+	# Now just specify mnt
+	print_log "SHOULD FAIL remounting $fstype (MNT ONLY) \"$2\" "
+	do_mnt -n remount,$2 $3
+	if [ $? -eq 0 ]; then
+		fail
+	else
+		ok
+	fi
+}
+
+not_remount() {
+	not_remount_noumount $*
+	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+}
+
+
+do_mkfs() {
+	$MKE2FS_PROG -T $fstype -Fq $* >> $seqres.full 2>&1 ||
+	_fail "mkfs failed - $MKFS_EXT4_PROG -Fq $* $SCRATCH_DEV"
+}
+
+not_ext2() {
+	if [[ $fstype == "ext2" ]]; then
+		not_$*
+	else
+		$*
+	fi
+}
+
+only_ext4() {
+	if [[ $fstype == "ext4" ]]; then
+		$*
+	else
+		not_$*
+	fi
+}
+
+# Create logdev for external journal
+LOOP_IMG=$tmp.logdev
+truncate -s ${LOGSIZE}k $LOOP_IMG
+LOOP_LOGDEV=`_create_loop_device $LOOP_IMG`
+majmin=`stat -c "%t:%T" $LOOP_LOGDEV`
+LOGDEV_DEVNUM=`echo "${majmin%:*}*2^8 + ${majmin#*:}" | bc`
+
+# Test all the extN file system supported by ext4 driver
+fstype=
+for fstype in ext2 ext3 ext4; do
+
+	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+	$UMOUNT_PROG $SCRATCH_DEV 2> /dev/null
+
+	do_mkfs $SCRATCH_DEV ${SIZE}k
+
+	# do we have fstype support ?
+	do_mnt
+	if [ $? -ne 0 ]; then
+		print_log "$fstype not supported. Skipping..."
+		ok
+		continue
+	fi
+	if [ ! -f /proc/fs/ext4/$(_short_dev $SCRATCH_DEV)/options ]; then
+		print_log "$fstype not supported. Skipping..."
+		ok
+		continue
+	fi
+
+	$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+
+	not_mnt failme
+	mnt
+	mnt bsddf
+	mnt minixdf
+	mnt grpid
+	mnt -t bsdgroups grpid
+	mnt nogrpid
+	mnt sysvgroups nogrpid
+	mnt resgid=1001
+	mnt resuid=1001
+	mnt sb=131072
+	mnt errors=continue
+	mnt errors=panic
+	mnt errors=remount-ro
+	mnt nouid32
+	mnt debug
+	mnt oldalloc removed
+	mnt orlov removed
+	mnt -t user_xattr
+	mnt nouser_xattr
+	mnt -t acl
+	not_ext2 mnt noload norecovery
+	mnt bh removed
+	mnt nobh removed
+	not_ext2 mnt commit=7
+	mnt min_batch_time=200
+	mnt max_batch_time=10000
+	only_ext4 mnt journal_checksum
+	only_ext4 mnt nojournal_checksum
+	only_ext4 mnt journal_async_commit,data=writeback
+	mnt abort ignored
+	not_ext2 mnt -t data=journal
+	not_ext2 mnt -t data=ordered
+	not_ext2 mnt -t data=writeback
+	not_ext2 mnt data_err=abort
+	not_ext2 mnt data_err=ignore ignored
+	mnt usrjquota=aquota.user,jqfmt=vfsv0
+	not_mnt usrjquota=aquota.user
+	mnt usrjquota= ignored
+	mnt grpjquota=aquota.group,jqfmt=vfsv0
+	not_mnt grpjquota=aquota.group
+	mnt grpjquota= ignored
+	mnt jqfmt=vfsold
+	mnt jqfmt=vfsv0
+	mnt jqfmt=vfsv1
+	mnt grpquota
+	mnt quota
+	mnt noquota
+	mnt usrquota
+	mnt grpquota
+	mnt barrier
+	mnt barrier=0 nobarrier
+	mnt barrier=1 barrier
+	mnt barrier=99 barrier
+	mnt -t nobarrier
+	mnt i_version
+	mnt stripe=512
+	only_ext4 mnt delalloc
+	only_ext4 mnt -t nodelalloc
+	mnt warn_on_error
+	mnt nowarn_on_error
+	not_mnt debug_want_extra_isize=512
+	mnt debug_want_extra_isize=32 ignored
+	mnt mblk_io_submit removed
+	mnt nomblk_io_submit removed
+	mnt -t block_validity
+	mnt noblock_validity
+	mnt inode_readahead_blks=16
+	not_ext2 mnt journal_ioprio=6 ignored
+	mnt auto_da_alloc=0 noauto_da_alloc
+	mnt auto_da_alloc=1 auto_da_alloc
+	mnt auto_da_alloc=95 auto_da_alloc
+	mnt auto_da_alloc
+	mnt noauto_da_alloc
+	only_ext4 mnt dioread_nolock
+	only_ext4 mnt nodioread_nolock
+	only_ext4 mnt dioread_lock nodioread_nolock
+	mnt -t discard
+	mnt nodiscard
+	mnt init_itable=20
+	mnt init_itable
+	mnt init_itable=0
+	mnt noinit_itable
+	mnt max_dir_size_kb=4096
+	mnt test_dummy_encryption
+	mnt test_dummy_encryption=v1
+	mnt test_dummy_encryption=v2
+	not_mnt test_dummy_encryption=v3
+	not_mnt test_dummy_encryption=
+	mnt inlinecrypt
+	mnt prefetch_block_bitmaps removed
+	mnt no_prefetch_block_bitmaps
+	# We don't currently have a way to know that the option has been
+	# applied, so comment it out for now. This should be fixed in the
+	# future.
+	#mnt mb_optimize_scan=0
+	#mnt mb_optimize_scan=1
+	#not_mnt mb_optimize_scan=9
+	#not_mnt mb_optimize_scan=
+	mnt nombcache
+	mnt no_mbcache nombcache
+	mnt check=none removed
+	mnt nocheck removed
+	mnt reservation removed
+	mnt noreservation removed
+	mnt journal=20 ignored
+	not_mnt nonsenseoption
+	not_mnt nonsenseoption=value
+
+	# generic mount options
+	mnt lazytime
+	mnt nolazytime ^lazytime
+	mnt noatime
+	mnt nodiratime
+	mnt noexec
+	mnt nosuid
+	mnt ro
+
+	# generic remount check
+	remount barrier nobarrier
+	remount nobarrier barrier
+	remount discard nodiscard
+	remount nodiscard discard
+
+	# dax mount options
+	simple_mount -o dax=always $SCRATCH_DEV $SCRATCH_MNT > /dev/null 2>&1
+	if [ $? -eq 0 ]; then
+		$UMOUNT_PROG $SCRATCH_MNT 2> /dev/null
+		mnt dax
+		mnt dax=always
+		mnt dax=never
+		mnt dax=inode
+
+		not_remount lazytime dax
+		not_remount dax=always dax=never
+
+		if [[ $fstype != "ext2" ]]; then
+			not_remount data=journal dax
+			not_remount data=journal dax=always
+			not_remount data=journal dax=never
+			not_remount data=journal dax=inode
+		fi
+	fi
+
+	# Quota remount check
+	remount grpquota usrquota
+	remount usrquota quota
+	remount usrquota usrjquota=q.u,jqfmt=vfsv0
+	remount grpquota grpjquota=q.g,jqfmt=vfsv0
+
+	not_remount usrquota grpjquota=q.g,jqfmt=vfsv0
+	not_remount grpquota usrjquota=q.u,jqfmt=vfsv0
+
+	remount quota usrjquota=q.u,jqfmt=vfsv0
+	not_remount quota grpjquota=q.g,jqfmt=vfsv0
+
+	remount usrjquota=q.u,jqfmt=vfsv0 grpjquota=q.g
+	not_remount usrjquota=q.u,jqfmt=vfsv0 usrjquota=q.ua
+	not_remount grpjquota=q.g,jqfmt=vfsv0 grpjquota=q.ga
+
+	remount usrjquota=q.u,jqfmt=vfsv0 usrquota usrjquota=q.u,jqfmt=vfsv0
+	remount grpjquota=q.g,jqfmt=vfsv0 grpquota grpjquota=q.g,jqfmt=vfsv0
+	not_remount usrjquota=q.u,jqfmt=vfsv0 grpquota
+	not_remount grpjquota=q.g,jqfmt=vfsv0 usrquota
+
+	remount grpjquota=q.g,jqfmt=vfsv0 grpjquota= ^grpjquota=
+	remount usrjquota=q.u,jqfmt=vfsv0 usrjquota= ^usrjquota=
+	remount grpjquota=q.g,usrjquota=q.u,jqfmt=vfsv0 grpjquota=,usrjquota= ^grpjquota=,^usrjquota=
+
+	remount jqfmt=vfsv0 grpjquota=q.g
+	remount jqfmt=vfsv0 usrjquota=q.u
+
+	if [[ $fstype != "ext2" ]]; then
+		remount noload data=journal norecovery
+		not_remount data=ordered data=journal
+		not_remount data=journal data=writeback
+		not_remount data=writeback data=ordered
+	fi
+
+	do_mkfs -O journal_dev $LOOP_LOGDEV ${LOGSIZE}k
+	do_mkfs -J device=$LOOP_LOGDEV $SCRATCH_DEV ${SIZE}k
+	mnt defaults
+	mnt journal_path=$LOOP_LOGDEV ignored
+	mnt journal_dev=$LOGDEV_DEVNUM ignored
+	not_mnt journal_path=${LOOP_LOGDEV}_nonexistent ignored
+	not_mnt journal_dev=123456 ignored
+	not_mnt journal_dev=999999999999999 ignored
+
+	do_mkfs -E quotatype=prjquota $SCRATCH_DEV ${SIZE}k
+	mnt prjquota
+
+	# test clearing/changing journalled quota when enabled
+	echo "== Testing active journalled quota" >> $seqres.full
+	mnt_only prjquota,grpjquota=aquota.group,usrjquota=aquota.user,jqfmt=vfsv0
+
+	# Prepare and enable quota
+	quotacheck -vugm $SCRATCH_MNT >> $seqres.full 2>&1
+	quotaon -vug $SCRATCH_MNT >> $seqres.full 2>&1
+
+	not_remount_noumount -r grpjquota=
+	not_remount_noumount -r usrjquota=aaquota.user
+	not_remount_noumount -r grpjquota=aaquota.group
+	not_remount_noumount -r jqfmt=vfsv1
+	not_remount_noumount -r noquota
+	mnt_only remount,usrquota,grpquota ^usrquota,^grpquota
+	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+
+	# test clearing/changing quota when enabled
+	do_mkfs -E quotatype=^prjquota $SCRATCH_DEV ${SIZE}k
+	not_mnt prjquota
+	echo "== Testing active non-journalled quota" >> $seqres.full
+	mnt_only grpquota,usrquota
+
+	# Prepare and enable quota
+	quotacheck -vugm $SCRATCH_MNT >> $seqres.full 2>&1
+	quotaon -vug $SCRATCH_MNT >> $seqres.full 2>&1
+
+	not_remount_noumount -r noquota
+	not_remount_noumount -r usrjquota=aquota.user
+	not_remount_noumount -r grpjquota=aquota.group
+	not_remount_noumount -r jqfmt=vfsv1
+	mnt_only remount,grpjquota= grpquota,^grpjquota
+	mnt_only remount,usrjquota= usrquota,^usrjquota
+	mnt_only remount,usrquota,grpquota usrquota,grpquota
+	quotaoff -f $SCRATCH_MNT >> $seqres.full 2>&1
+	mnt_only remount,noquota ^usrquota,^grpquota,quota
+	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+
+	# Quota feature
+	echo "== Testing quota feature " >> $seqres.full
+	do_mkfs -O quota -E quotatype=prjquota $SCRATCH_DEV ${SIZE}k
+	mnt usrjquota=aquota.user,jqfmt=vfsv0 ^usrjquota=
+	mnt grpjquota=aquota.user,jqfmt=vfsv0 ^grpjquota=
+	mnt jqfmt=vfsv1 ^jqfmt=
+	mnt prjquota
+	mnt usrquota
+	mnt grpquota
+	not_remount defaults usrjquota=aquota.user
+	not_remount defaults grpjquota=aquota.user
+	not_remount defaults jqfmt=vfsv1
+	remount defaults grpjquota=,usrjquota= ignored
+
+done #for fstype in ext2 ext3 ext4; do
+
+$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+echo "$ERR errors encountered" >> $seqres.full
+
+status=$ERR
+exit
diff --git a/tests/ext4/053.out b/tests/ext4/053.out
new file mode 100644
index 00000000..d58db7e4
--- /dev/null
+++ b/tests/ext4/053.out
@@ -0,0 +1,2 @@
+QA output created by 053
+Silence is golden.
-- 
2.31.1