Received-SPF: pass (google.com: domain of linux-ext4+bounces-335-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
Secumail-id: <3d64.6571a38f.5904d.0>
Message-ID: <77d9ad6b-726f-f296-8a91-c93d5791b4cb@kalrayinc.com>
Date: Thu, 7 Dec 2023 11:50:52 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.0
Subject: Re: regression in 6.1.yy branch: LTP test preadv03 fails
Content-Language: en-us
To: Greg KH <gregkh@linuxfoundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>, Andreas Dilger
 <adilger.kernel@dilger.ca>, linux-ext4@vger.kernel.org,
 linux-kernel@vger.kernel.org
References: <c1f93c13-4865-b5a8-8969-4c2f5cb8f776@kalrayinc.com>
 <2023120747-domain-angled-d633@gregkh>
From: Yann Sionneau <ysionneau@kalrayinc.com>
In-Reply-To: <2023120747-domain-angled-d633@gregkh>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk
MIME-Version: 1.0
X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1
X-MS-Exchange-AntiSpam-MessageData-0: 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
X-OriginatorOrg: kalrayinc.com
X-MS-Exchange-CrossTenant-Network-Message-Id: c07e6ee7-6653-4206-89af-08dbf71262c1
X-MS-Exchange-CrossTenant-AuthSource: MR1P264MB1890.FRAP264.PROD.OUTLOOK.COM
X-MS-Exchange-CrossTenant-AuthAs: Internal
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 07 Dec 2023 10:50:54.3093
 (UTC)
X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted
X-MS-Exchange-CrossTenant-Id: 8931925d-7620-4a64-b7fe-20afd86363d3
X-MS-Exchange-CrossTenant-MailboxType: HOSTED
X-MS-Exchange-CrossTenant-UserPrincipalName: nRQ3iiXg21JcuIs3g60pqQGIiwNBYGdcCa9TsN2xLK7Ps2rNmzKBoZMsSrQZuyTEsosF0wgFeysTBzRYMXEyjg==
X-MS-Exchange-Transport-CrossTenantHeadersStamped: MR1P264MB1668
X-ALTERMIMEV2_out: done

On 12/7/23 11:13, Greg KH wrote:

> On Thu, Dec 07, 2023 at 11:05:15AM +0100, Yann Sionneau wrote:
>> Hello,
>>
>> I noticed yesterday that LTP test preadv03 now fails since 6.1.64 (it also
>> fails on 6.1.65).
>>
>> 6.6.4, 6.6.3, 6.5.0 and 6.2.0 seem to be unaffected.
>>
>> I tested this on x86_64 and kvx arch (the latter is not upstream).
>>
>> I can see some ext4 related commits on 6.1.64 and 6.1.65 changes, maybe it's
>> related, therefore I add ext4 mailing list as CC.
>>
>> I didn't run git bisect on this so far because I noticed building an x86_64
>> ubuntu kernel on my laptop was taking ages. Maybe someone is more used to
>> dealing with this and can bisect this way faster than me.
> Should be fixed in the latest 6.1.y-rc release, right?  If not, please
> let me know.

Thanks for the quick reply, indeed it seems way better on 6.1.66-rc2.

I tested on kvx arch, all preadv* LTP tests are passing:

```

# ./preadv03
tst_device.c:88: TINFO: Found free device 0 '/dev/loop0'
[  346.920257] loop0: detected capacity change from 0 to 524288
[  346.970126] /dev/zero: Can't open blockdev
tst_supported_fs_types.c:89: TINFO: Kernel supports ext2
tst_supported_fs_types.c:51: TINFO: mkfs.ext2 does exist
[  346.993817] /dev/zero: Can't open blockdev
tst_supported_fs_types.c:89: TINFO: Kernel supports ext3
tst_supported_fs_types.c:51: TINFO: mkfs.ext3 does exist
[  347.021140] /dev/zero: Can't open blockdev
tst_supported_fs_types.c:89: TINFO: Kernel supports ext4
tst_supported_fs_types.c:51: TINFO: mkfs.ext4 does exist
tst_supported_fs_types.c:89: TINFO: Kernel supports vfat
tst_supported_fs_types.c:47: TINFO: mkfs.vfat does not exist
tst_supported_fs_types.c:156: TINFO: Skipping tmpfs as requested by the test
tst_test.c:1500: TINFO: Testing on ext2
tst_test.c:996: TINFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.46.2 (28-Feb-2021)
[  347.283637] blk_print_req_error: 96 callbacks suppressed
[  347.283662] operation not supported error, dev loop0, sector 524160 
op 0x9:(WRITE_ZEROES) flags 0x800
0800 phys_seg 0 prio class 2
[  347.301367] operation not supported error, dev loop0, sector 522 op 
0x9:(WRITE_ZEROES) flags 0x800080
0 phys_seg 0 prio class 2
[  347.313610] operation not supported error, dev loop0, sector 16906 op 
0x9:(WRITE_ZEROES) flags 0x8000
800 phys_seg 0 prio class 2
[  347.325948] operation not supported error, dev loop0, sector 32774 op 
0x9:(WRITE_ZEROES) flags 0x8000
800 phys_seg 0 prio class 2
[  347.338311] operation not supported error, dev loop0, sector 49674 op 
0x9:(WRITE_ZEROES) flags 0x8000
800 phys_seg 0 prio class 2
[  347.350667] operation not supported error, dev loop0, sector 65542 op 
0x9:(WRITE_ZEROES) flags 0x8000
800 phys_seg 0 prio class 2
[  347.363027] operation not supported error, dev loop0, sector 82442 op 
0x9:(WRITE_ZEROES) flags 0x8000
800 phys_seg 0 prio class 2
[  347.375367] operation not supported error, dev loop0, sector 98310 op 
0x9:(WRITE_ZEROES) flags 0x8000
800 phys_seg 0 prio class 2
[  347.387733] operation not supported error, dev loop0, sector 115210 
op 0x9:(WRITE_ZEROES) flags 0x800
0800 phys_seg 0 prio class 2
[  347.400156] operation not supported error, dev loop0, sector 131078 
op 0x9:(WRITE_ZEROES) flags 0x800
0800 phys_seg 0 prio class 2
[  347.445283] EXT4-fs (loop0): mounting ext2 file system using the ext4 
subsystem
[  347.453761] EXT4-fs (loop0): mounted filesystem without journal. 
Quota mode: disabled.
[  347.461716] ext2 filesystem being mounted at /tmp/preB0llUr/mntpoint 
supports timestamps until 2038 (
0x7fffffff)
tst_test.c:1431: TINFO: Timeout per run is 0h 05m 00s
[  347.475662] EXT4-fs (loop0): unmounting filesystem.
preadv03.c:102: TINFO: Using block size 512
preadv03.c:87: TPASS: preadv(O_DIRECT) read 512 bytes successfully with 
content 'a' expectedly
preadv03.c:87: TPASS: preadv(O_DIRECT) read 512 bytes successfully with 
content 'a' expectedly
preadv03.c:87: TPASS: preadv(O_DIRECT) read 512 bytes successfully with 
content 'b' expectedly
tst_test.c:1500: TINFO: Testing on ext3
tst_test.c:996: TINFO: Formatting /dev/loop0 with ext3 opts='' extra opts=''
mke2fs 1.46.2 (28-Feb-2021)
[  347.780931] EXT4-fs (loop0): mounting ext3 file system using the ext4 
subsystem
[  347.791652] EXT4-fs (loop0): mounted filesystem with ordered data 
mode. Quota mode: disabled.
[  347.800197] ext3 filesystem being mounted at /tmp/preB0llUr/mntpoint 
supports timestamps until 2038 (
0x7fffffff)
tst_test.c:1431: TINFO: Timeout per run is 0h 05m 00s
[  347.814544] EXT4-fs (loop0): unmounting filesystem.
preadv03.c:102: TINFO: Using block size 512
preadv03.c:87: TPASS: preadv(O_DIRECT) read 512 bytes successfully with 
content 'a' expectedly
preadv03.c:87: TPASS: preadv(O_DIRECT) read 512 bytes successfully with 
content 'a' expectedly
preadv03.c:87: TPASS: preadv(O_DIRECT) read 512 bytes successfully with 
content 'b' expectedly
tst_test.c:1500: TINFO: Testing on ext4
tst_test.c:996: TINFO: Formatting /dev/loop0 with ext4 opts='' extra opts=''
mke2fs 1.46.2 (28-Feb-2021)
[  347.888885] EXT4-fs (loop0): mounted filesystem with ordered data 
mode. Quota mode: disabled.
[  347.897455] ext4 filesystem being mounted at /tmp/preB0llUr/mntpoint 
supports timestamps until 2038 (
0x7fffffff)
tst_test.c:1431: TINFO: Timeout per run is 0h 05m 00s
[  347.911462] EXT4-fs (loop0): unmounting filesystem.
preadv03.c:102: TINFO: Using block size 512
preadv03.c:87: TPASS: preadv(O_DIRECT) read 512 bytes successfully with 
content 'a' expectedly
preadv03.c:87: TPASS: preadv(O_DIRECT) read 512 bytes successfully with 
content 'a' expectedly
preadv03.c:87: TPASS: preadv(O_DIRECT) read 512 bytes successfully with 
content 'b' expectedly

Summary:
passed   9
failed   0
broken   0
skipped  0
warnings 0

```

The errors during mkfs are weird but maybe it's an issue in kvx port... 
at least the test is passing now.

Thanks!

-- 

Yann