- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Add it to filesystems/index.rst.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
Documentation/admin-guide/ext4.rst | 2 +-
Documentation/filesystems/{dax.txt => dax.rst} | 9 +++++++--
Documentation/filesystems/ext2.rst | 2 +-
Documentation/filesystems/index.rst | 1 +
4 files changed, 10 insertions(+), 4 deletions(-)
rename Documentation/filesystems/{dax.txt => dax.rst} (97%)
diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
index 9443fcef1876..103bcc345bad 100644
--- a/Documentation/admin-guide/ext4.rst
+++ b/Documentation/admin-guide/ext4.rst
@@ -392,7 +392,7 @@ When mounting an ext4 filesystem, the following option are accepted:
dax
Use direct access (no page cache). See
- Documentation/filesystems/dax.txt. Note that this option is
+ Documentation/filesystems/dax.rst. Note that this option is
incompatible with data=journal.
Data Mode
diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.rst
similarity index 97%
rename from Documentation/filesystems/dax.txt
rename to Documentation/filesystems/dax.rst
index 735f3859b19f..5838144f80f0 100644
--- a/Documentation/filesystems/dax.txt
+++ b/Documentation/filesystems/dax.rst
@@ -1,5 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
Direct Access for files
------------------------
+=======================
Motivation
----------
@@ -46,6 +49,7 @@ stall the CPU for an extended period, you should also not attempt to
implement direct_access.
These block devices may be used for inspiration:
+
- brd: RAM backed block device driver
- dcssblk: s390 dcss block device driver
- pmem: NVDIMM persistent memory driver
@@ -55,6 +59,7 @@ Implementation Tips for Filesystem Writers
------------------------------------------
Filesystem support consists of
+
- adding support to mark inodes as being DAX by setting the S_DAX flag in
i_flags
- implementing ->read_iter and ->write_iter operations which use dax_iomap_rw()
@@ -127,6 +132,6 @@ by adding optional struct page support for pages under the control of
the driver (see CONFIG_NVDIMM_PFN in drivers/nvdimm for an example of
how to do this). In the non struct page cases O_DIRECT reads/writes to
those memory ranges from a non-DAX file will fail (note that O_DIRECT
-reads/writes _of a DAX file_ do work, it is the memory that is being
+reads/writes _of a DAX ``file_`` do work, it is the memory that is being
accessed that is key here). Other things that will not work in the
non struct page case include RDMA, sendfile() and splice().
diff --git a/Documentation/filesystems/ext2.rst b/Documentation/filesystems/ext2.rst
index d83dbbb162e2..fa416b7a5802 100644
--- a/Documentation/filesystems/ext2.rst
+++ b/Documentation/filesystems/ext2.rst
@@ -24,7 +24,7 @@ check=none, nocheck (*) Don't do extra checking of bitmaps on mount
(check=normal and check=strict options removed)
dax Use direct access (no page cache). See
- Documentation/filesystems/dax.txt.
+ Documentation/filesystems/dax.rst.
debug Extra debugging information is sent to the
kernel syslog. Useful for developers.
diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
index c4f95f76ba6a..8e3ccb4ed483 100644
--- a/Documentation/filesystems/index.rst
+++ b/Documentation/filesystems/index.rst
@@ -24,6 +24,7 @@ algorithms work.
splice
locking
directory-locking
+ dax
automount-support
--
2.25.2
[add ira weiny to cc]
On Wed, Apr 15, 2020 at 04:32:25PM +0200, Mauro Carvalho Chehab wrote:
> - Add a SPDX header;
> - Adjust document title;
> - Some whitespace fixes and new line breaks;
> - Add it to filesystems/index.rst.
>
> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
> ---
> Documentation/admin-guide/ext4.rst | 2 +-
> Documentation/filesystems/{dax.txt => dax.rst} | 9 +++++++--
> Documentation/filesystems/ext2.rst | 2 +-
> Documentation/filesystems/index.rst | 1 +
> 4 files changed, 10 insertions(+), 4 deletions(-)
> rename Documentation/filesystems/{dax.txt => dax.rst} (97%)
>
> diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
> index 9443fcef1876..103bcc345bad 100644
> --- a/Documentation/admin-guide/ext4.rst
> +++ b/Documentation/admin-guide/ext4.rst
> @@ -392,7 +392,7 @@ When mounting an ext4 filesystem, the following option are accepted:
>
> dax
> Use direct access (no page cache). See
> - Documentation/filesystems/dax.txt. Note that this option is
> + Documentation/filesystems/dax.rst. Note that this option is
> incompatible with data=journal.
>
> Data Mode
> diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.rst
> similarity index 97%
> rename from Documentation/filesystems/dax.txt
> rename to Documentation/filesystems/dax.rst
> index 735f3859b19f..5838144f80f0 100644
> --- a/Documentation/filesystems/dax.txt
> +++ b/Documentation/filesystems/dax.rst
Err, this will collide with the work that Ira's doing on DAX for 5.8[1].
Can the dax.txt conversion wait?
--D
[1] https://lore.kernel.org/linux-xfs/20200415152942.GS6742@magnolia/T/#m804562299416d865d8829caa82589a522b2080a5
> @@ -1,5 +1,8 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=======================
> Direct Access for files
> ------------------------
> +=======================
>
> Motivation
> ----------
> @@ -46,6 +49,7 @@ stall the CPU for an extended period, you should also not attempt to
> implement direct_access.
>
> These block devices may be used for inspiration:
> +
> - brd: RAM backed block device driver
> - dcssblk: s390 dcss block device driver
> - pmem: NVDIMM persistent memory driver
> @@ -55,6 +59,7 @@ Implementation Tips for Filesystem Writers
> ------------------------------------------
>
> Filesystem support consists of
> +
> - adding support to mark inodes as being DAX by setting the S_DAX flag in
> i_flags
> - implementing ->read_iter and ->write_iter operations which use dax_iomap_rw()
> @@ -127,6 +132,6 @@ by adding optional struct page support for pages under the control of
> the driver (see CONFIG_NVDIMM_PFN in drivers/nvdimm for an example of
> how to do this). In the non struct page cases O_DIRECT reads/writes to
> those memory ranges from a non-DAX file will fail (note that O_DIRECT
> -reads/writes _of a DAX file_ do work, it is the memory that is being
> +reads/writes _of a DAX ``file_`` do work, it is the memory that is being
> accessed that is key here). Other things that will not work in the
> non struct page case include RDMA, sendfile() and splice().
> diff --git a/Documentation/filesystems/ext2.rst b/Documentation/filesystems/ext2.rst
> index d83dbbb162e2..fa416b7a5802 100644
> --- a/Documentation/filesystems/ext2.rst
> +++ b/Documentation/filesystems/ext2.rst
> @@ -24,7 +24,7 @@ check=none, nocheck (*) Don't do extra checking of bitmaps on mount
> (check=normal and check=strict options removed)
>
> dax Use direct access (no page cache). See
> - Documentation/filesystems/dax.txt.
> + Documentation/filesystems/dax.rst.
>
> debug Extra debugging information is sent to the
> kernel syslog. Useful for developers.
> diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> index c4f95f76ba6a..8e3ccb4ed483 100644
> --- a/Documentation/filesystems/index.rst
> +++ b/Documentation/filesystems/index.rst
> @@ -24,6 +24,7 @@ algorithms work.
> splice
> locking
> directory-locking
> + dax
>
> automount-support
>
> --
> 2.25.2
>
Em Wed, 15 Apr 2020 08:41:44 -0700
"Darrick J. Wong" <[email protected]> escreveu:
> [add ira weiny to cc]
>
> On Wed, Apr 15, 2020 at 04:32:25PM +0200, Mauro Carvalho Chehab wrote:
> > - Add a SPDX header;
> > - Adjust document title;
> > - Some whitespace fixes and new line breaks;
> > - Add it to filesystems/index.rst.
> >
> > Signed-off-by: Mauro Carvalho Chehab <[email protected]>
> > ---
> > Documentation/admin-guide/ext4.rst | 2 +-
> > Documentation/filesystems/{dax.txt => dax.rst} | 9 +++++++--
> > Documentation/filesystems/ext2.rst | 2 +-
> > Documentation/filesystems/index.rst | 1 +
> > 4 files changed, 10 insertions(+), 4 deletions(-)
> > rename Documentation/filesystems/{dax.txt => dax.rst} (97%)
> >
> > diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
> > index 9443fcef1876..103bcc345bad 100644
> > --- a/Documentation/admin-guide/ext4.rst
> > +++ b/Documentation/admin-guide/ext4.rst
> > @@ -392,7 +392,7 @@ When mounting an ext4 filesystem, the following option are accepted:
> >
> > dax
> > Use direct access (no page cache). See
> > - Documentation/filesystems/dax.txt. Note that this option is
> > + Documentation/filesystems/dax.rst. Note that this option is
> > incompatible with data=journal.
> >
> > Data Mode
> > diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.rst
> > similarity index 97%
> > rename from Documentation/filesystems/dax.txt
> > rename to Documentation/filesystems/dax.rst
> > index 735f3859b19f..5838144f80f0 100644
> > --- a/Documentation/filesystems/dax.txt
> > +++ b/Documentation/filesystems/dax.rst
>
> Err, this will collide with the work that Ira's doing on DAX for 5.8[1].
> Can the dax.txt conversion wait?
Well, I can re-schedule it to 5.9. Or, if you merge the dax changes
at linux-next, I can rebase my patch on the top of it.
>
> --D
>
> [1] https://lore.kernel.org/linux-xfs/20200415152942.GS6742@magnolia/T/#m804562299416d865d8829caa82589a522b2080a5
>
> > @@ -1,5 +1,8 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +=======================
> > Direct Access for files
> > ------------------------
> > +=======================
> >
> > Motivation
> > ----------
> > @@ -46,6 +49,7 @@ stall the CPU for an extended period, you should also not attempt to
> > implement direct_access.
> >
> > These block devices may be used for inspiration:
> > +
> > - brd: RAM backed block device driver
> > - dcssblk: s390 dcss block device driver
> > - pmem: NVDIMM persistent memory driver
> > @@ -55,6 +59,7 @@ Implementation Tips for Filesystem Writers
> > ------------------------------------------
> >
> > Filesystem support consists of
> > +
> > - adding support to mark inodes as being DAX by setting the S_DAX flag in
> > i_flags
> > - implementing ->read_iter and ->write_iter operations which use dax_iomap_rw()
> > @@ -127,6 +132,6 @@ by adding optional struct page support for pages under the control of
> > the driver (see CONFIG_NVDIMM_PFN in drivers/nvdimm for an example of
> > how to do this). In the non struct page cases O_DIRECT reads/writes to
> > those memory ranges from a non-DAX file will fail (note that O_DIRECT
> > -reads/writes _of a DAX file_ do work, it is the memory that is being
> > +reads/writes _of a DAX ``file_`` do work, it is the memory that is being
> > accessed that is key here). Other things that will not work in the
> > non struct page case include RDMA, sendfile() and splice().
> > diff --git a/Documentation/filesystems/ext2.rst b/Documentation/filesystems/ext2.rst
> > index d83dbbb162e2..fa416b7a5802 100644
> > --- a/Documentation/filesystems/ext2.rst
> > +++ b/Documentation/filesystems/ext2.rst
> > @@ -24,7 +24,7 @@ check=none, nocheck (*) Don't do extra checking of bitmaps on mount
> > (check=normal and check=strict options removed)
> >
> > dax Use direct access (no page cache). See
> > - Documentation/filesystems/dax.txt.
> > + Documentation/filesystems/dax.rst.
> >
> > debug Extra debugging information is sent to the
> > kernel syslog. Useful for developers.
> > diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> > index c4f95f76ba6a..8e3ccb4ed483 100644
> > --- a/Documentation/filesystems/index.rst
> > +++ b/Documentation/filesystems/index.rst
> > @@ -24,6 +24,7 @@ algorithms work.
> > splice
> > locking
> > directory-locking
> > + dax
> >
> > automount-support
> >
> > --
> > 2.25.2
> >
Thanks,
Mauro
On Tue, Apr 21, 2020 at 06:31:17PM +0200, Mauro Carvalho Chehab wrote:
> Em Wed, 15 Apr 2020 08:41:44 -0700
> "Darrick J. Wong" <[email protected]> escreveu:
>
> > [add ira weiny to cc]
> >
> > On Wed, Apr 15, 2020 at 04:32:25PM +0200, Mauro Carvalho Chehab wrote:
> > > - Add a SPDX header;
> > > - Adjust document title;
> > > - Some whitespace fixes and new line breaks;
> > > - Add it to filesystems/index.rst.
> > >
> > > Signed-off-by: Mauro Carvalho Chehab <[email protected]>
> > > ---
> > > Documentation/admin-guide/ext4.rst | 2 +-
> > > Documentation/filesystems/{dax.txt => dax.rst} | 9 +++++++--
> > > Documentation/filesystems/ext2.rst | 2 +-
> > > Documentation/filesystems/index.rst | 1 +
> > > 4 files changed, 10 insertions(+), 4 deletions(-)
> > > rename Documentation/filesystems/{dax.txt => dax.rst} (97%)
> > >
> > > diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
> > > index 9443fcef1876..103bcc345bad 100644
> > > --- a/Documentation/admin-guide/ext4.rst
> > > +++ b/Documentation/admin-guide/ext4.rst
> > > @@ -392,7 +392,7 @@ When mounting an ext4 filesystem, the following option are accepted:
> > >
> > > dax
> > > Use direct access (no page cache). See
> > > - Documentation/filesystems/dax.txt. Note that this option is
> > > + Documentation/filesystems/dax.rst. Note that this option is
> > > incompatible with data=journal.
> > >
> > > Data Mode
> > > diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.rst
> > > similarity index 97%
> > > rename from Documentation/filesystems/dax.txt
> > > rename to Documentation/filesystems/dax.rst
> > > index 735f3859b19f..5838144f80f0 100644
> > > --- a/Documentation/filesystems/dax.txt
> > > +++ b/Documentation/filesystems/dax.rst
> >
> > Err, this will collide with the work that Ira's doing on DAX for 5.8[1].
> > Can the dax.txt conversion wait?
>
> Well, I can re-schedule it to 5.9. Or, if you merge the dax changes
> at linux-next, I can rebase my patch on the top of it.
That depends on how quick Ira can get the series merged. :)
I personally think (hope) everyone's tired of arguing and we can just
get it done for 5.8, but past experience tells me that rescheduling the
rst conversion to 5.90 is at least a safer bet.
--D
> >
> > --D
> >
> > [1] https://lore.kernel.org/linux-xfs/20200415152942.GS6742@magnolia/T/#m804562299416d865d8829caa82589a522b2080a5
> >
> > > @@ -1,5 +1,8 @@
> > > +.. SPDX-License-Identifier: GPL-2.0
> > > +
> > > +=======================
> > > Direct Access for files
> > > ------------------------
> > > +=======================
> > >
> > > Motivation
> > > ----------
> > > @@ -46,6 +49,7 @@ stall the CPU for an extended period, you should also not attempt to
> > > implement direct_access.
> > >
> > > These block devices may be used for inspiration:
> > > +
> > > - brd: RAM backed block device driver
> > > - dcssblk: s390 dcss block device driver
> > > - pmem: NVDIMM persistent memory driver
> > > @@ -55,6 +59,7 @@ Implementation Tips for Filesystem Writers
> > > ------------------------------------------
> > >
> > > Filesystem support consists of
> > > +
> > > - adding support to mark inodes as being DAX by setting the S_DAX flag in
> > > i_flags
> > > - implementing ->read_iter and ->write_iter operations which use dax_iomap_rw()
> > > @@ -127,6 +132,6 @@ by adding optional struct page support for pages under the control of
> > > the driver (see CONFIG_NVDIMM_PFN in drivers/nvdimm for an example of
> > > how to do this). In the non struct page cases O_DIRECT reads/writes to
> > > those memory ranges from a non-DAX file will fail (note that O_DIRECT
> > > -reads/writes _of a DAX file_ do work, it is the memory that is being
> > > +reads/writes _of a DAX ``file_`` do work, it is the memory that is being
> > > accessed that is key here). Other things that will not work in the
> > > non struct page case include RDMA, sendfile() and splice().
> > > diff --git a/Documentation/filesystems/ext2.rst b/Documentation/filesystems/ext2.rst
> > > index d83dbbb162e2..fa416b7a5802 100644
> > > --- a/Documentation/filesystems/ext2.rst
> > > +++ b/Documentation/filesystems/ext2.rst
> > > @@ -24,7 +24,7 @@ check=none, nocheck (*) Don't do extra checking of bitmaps on mount
> > > (check=normal and check=strict options removed)
> > >
> > > dax Use direct access (no page cache). See
> > > - Documentation/filesystems/dax.txt.
> > > + Documentation/filesystems/dax.rst.
> > >
> > > debug Extra debugging information is sent to the
> > > kernel syslog. Useful for developers.
> > > diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> > > index c4f95f76ba6a..8e3ccb4ed483 100644
> > > --- a/Documentation/filesystems/index.rst
> > > +++ b/Documentation/filesystems/index.rst
> > > @@ -24,6 +24,7 @@ algorithms work.
> > > splice
> > > locking
> > > directory-locking
> > > + dax
> > >
> > > automount-support
> > >
> > > --
> > > 2.25.2
> > >
>
>
>
> Thanks,
> Mauro
Em Tue, 21 Apr 2020 11:31:21 -0700
"Darrick J. Wong" <[email protected]> escreveu:
> On Tue, Apr 21, 2020 at 06:31:17PM +0200, Mauro Carvalho Chehab wrote:
> > Em Wed, 15 Apr 2020 08:41:44 -0700
> > "Darrick J. Wong" <[email protected]> escreveu:
> >
> > > [add ira weiny to cc]
> > >
> > > On Wed, Apr 15, 2020 at 04:32:25PM +0200, Mauro Carvalho Chehab wrote:
> > > > - Add a SPDX header;
> > > > - Adjust document title;
> > > > - Some whitespace fixes and new line breaks;
> > > > - Add it to filesystems/index.rst.
> > > >
> > > > Signed-off-by: Mauro Carvalho Chehab <[email protected]>
> > > > ---
> > > > Documentation/admin-guide/ext4.rst | 2 +-
> > > > Documentation/filesystems/{dax.txt => dax.rst} | 9 +++++++--
> > > > Documentation/filesystems/ext2.rst | 2 +-
> > > > Documentation/filesystems/index.rst | 1 +
> > > > 4 files changed, 10 insertions(+), 4 deletions(-)
> > > > rename Documentation/filesystems/{dax.txt => dax.rst} (97%)
> > > >
> > > > diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
> > > > index 9443fcef1876..103bcc345bad 100644
> > > > --- a/Documentation/admin-guide/ext4.rst
> > > > +++ b/Documentation/admin-guide/ext4.rst
> > > > @@ -392,7 +392,7 @@ When mounting an ext4 filesystem, the following option are accepted:
> > > >
> > > > dax
> > > > Use direct access (no page cache). See
> > > > - Documentation/filesystems/dax.txt. Note that this option is
> > > > + Documentation/filesystems/dax.rst. Note that this option is
> > > > incompatible with data=journal.
> > > >
> > > > Data Mode
> > > > diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.rst
> > > > similarity index 97%
> > > > rename from Documentation/filesystems/dax.txt
> > > > rename to Documentation/filesystems/dax.rst
> > > > index 735f3859b19f..5838144f80f0 100644
> > > > --- a/Documentation/filesystems/dax.txt
> > > > +++ b/Documentation/filesystems/dax.rst
> > >
> > > Err, this will collide with the work that Ira's doing on DAX for 5.8[1].
> > > Can the dax.txt conversion wait?
> >
> > Well, I can re-schedule it to 5.9. Or, if you merge the dax changes
> > at linux-next, I can rebase my patch on the top of it.
>
> That depends on how quick Ira can get the series merged. :)
>
> I personally think (hope) everyone's tired of arguing and we can just
> get it done for 5.8, but past experience tells me that rescheduling the
> rst conversion to 5.90 is at least a safer bet.
I can't tell much about Ira's patches, but, in the case of the ReST
conversion, there are not much left to convert anymore. The vast majority
of files under Documentation/*.txt are already in ReST format. They just
need to be renamed/moved to a better place. Besides that, there are
the fs patches on this series, network and a few misc text files.
I have patches for the remaining stuff already.
>
> --D
>
> > >
> > > --D
> > >
> > > [1] https://lore.kernel.org/linux-xfs/20200415152942.GS6742@magnolia/T/#m804562299416d865d8829caa82589a522b2080a5
> > >
> > > > @@ -1,5 +1,8 @@
> > > > +.. SPDX-License-Identifier: GPL-2.0
> > > > +
> > > > +=======================
> > > > Direct Access for files
> > > > ------------------------
> > > > +=======================
> > > >
> > > > Motivation
> > > > ----------
> > > > @@ -46,6 +49,7 @@ stall the CPU for an extended period, you should also not attempt to
> > > > implement direct_access.
> > > >
> > > > These block devices may be used for inspiration:
> > > > +
> > > > - brd: RAM backed block device driver
> > > > - dcssblk: s390 dcss block device driver
> > > > - pmem: NVDIMM persistent memory driver
> > > > @@ -55,6 +59,7 @@ Implementation Tips for Filesystem Writers
> > > > ------------------------------------------
> > > >
> > > > Filesystem support consists of
> > > > +
> > > > - adding support to mark inodes as being DAX by setting the S_DAX flag in
> > > > i_flags
> > > > - implementing ->read_iter and ->write_iter operations which use dax_iomap_rw()
> > > > @@ -127,6 +132,6 @@ by adding optional struct page support for pages under the control of
> > > > the driver (see CONFIG_NVDIMM_PFN in drivers/nvdimm for an example of
> > > > how to do this). In the non struct page cases O_DIRECT reads/writes to
> > > > those memory ranges from a non-DAX file will fail (note that O_DIRECT
> > > > -reads/writes _of a DAX file_ do work, it is the memory that is being
> > > > +reads/writes _of a DAX ``file_`` do work, it is the memory that is being
> > > > accessed that is key here). Other things that will not work in the
> > > > non struct page case include RDMA, sendfile() and splice().
> > > > diff --git a/Documentation/filesystems/ext2.rst b/Documentation/filesystems/ext2.rst
> > > > index d83dbbb162e2..fa416b7a5802 100644
> > > > --- a/Documentation/filesystems/ext2.rst
> > > > +++ b/Documentation/filesystems/ext2.rst
> > > > @@ -24,7 +24,7 @@ check=none, nocheck (*) Don't do extra checking of bitmaps on mount
> > > > (check=normal and check=strict options removed)
> > > >
> > > > dax Use direct access (no page cache). See
> > > > - Documentation/filesystems/dax.txt.
> > > > + Documentation/filesystems/dax.rst.
> > > >
> > > > debug Extra debugging information is sent to the
> > > > kernel syslog. Useful for developers.
> > > > diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst
> > > > index c4f95f76ba6a..8e3ccb4ed483 100644
> > > > --- a/Documentation/filesystems/index.rst
> > > > +++ b/Documentation/filesystems/index.rst
> > > > @@ -24,6 +24,7 @@ algorithms work.
> > > > splice
> > > > locking
> > > > directory-locking
> > > > + dax
> > > >
> > > > automount-support
> > > >
> > > > --
> > > > 2.25.2
> > > >
> >
> >
> >
> > Thanks,
> > Mauro
Thanks,
Mauro