From: "Aaron Durbin" Subject: Re: [discuss] Re: 2.6.19-rc4: known unfixed regressions (v3) Date: Tue, 7 Nov 2006 07:50:33 -0800 Message-ID: <8f95bb250611070750u5add612cm23c975d84f3aa638@mail.gmail.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Cc: Andrew Morton , len.brown@intel.com, Komuro , linux-pm@osdl.org, Ernst Herzberg , Christian , Alex Romosan , openib-general@openib.org, Andi Kleen , linux-ide@vger.kernel.org, Linus Torvalds , oprofile-list@lists.sourceforge.net, Jens Axboe , Martin Lorenz , linux-pci@atrey.karlin.mff.cuni.cz, Elimar Riesebieter , discuss@x86-64.org, Thierry Vignaud , Tim Chen , phil.el@wanadoo.fr, gregkh@suse.de, Linux Kernel Mailing List , Adrian Bunk , linux-acpi@vger.kernel.org, mingo@redhat.com, nfs@lists.sourceforge.net, "Eric W. Biederman" , cp Return-path: To: "Jeff Chua" In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.osdl.org Errors-To: linux-pm-bounces@lists.osdl.org List-ID: Jeff, Could please you post a dump of /proc/iomem for both the kernel that works for you and the kernel that fails to allocate the PCI resources? -Aaron On 11/6/06, Jeff Chua wrote: > > > On 11/7/06, Andi Kleen wrote: > > > Here's results with vanilla 2.6.19-rc4 (gcc version 3.4.5) ... > > > 1) PCI access mode (Any) ... FAILED > > > 2) PCI access mode (MMConfig) ... FAILED > > Full boot log please? > > > > 1) booting with MMConfig ... > > Linux version 2.6.19-rc4 (root@indiana.corp.fedex.com) (gcc version 3.4.5= ) #1 SMP PREEMPT Sun Nov 5 17:18:48 SGT 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000df686c00 (usable) > BIOS-e820: 00000000df686c00 - 00000000df688c00 (ACPI NVS) > BIOS-e820: 00000000df688c00 - 00000000df68ac00 (ACPI data) > BIOS-e820: 00000000df68ac00 - 00000000e0000000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) > BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > 2678MB HIGHMEM available. > 896MB LOWMEM available. > found SMP MP-table at 000fe710 > Entering add_active_range(0, 0, 915078) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 229376 > HighMem 229376 -> 915078 > early_node_map[1] active PFN ranges > 0: 0 -> 915078 > On node 0 totalpages: 915078 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1760 pages used for memmap > Normal zone: 223520 pages, LIFO batch:31 > HighMem zone: 5357 pages used for memmap > HighMem zone: 680345 pages, LIFO batch:31 > DMI 2.3 present. > ACPI: RSDP (v002 DELL ) @ 0x000feb00 > ACPI: XSDT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd253 > ACPI: FADT (v003 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd34b > ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050309) @ 0xfffd6996 > ACPI: MADT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd43f > ACPI: BOOT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4b1 > ACPI: ASF! (v016 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4d9 > ACPI: MCFG (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd540 > ACPI: HPET (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd57e > ACPI: SSDT (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20050309) @ 0xdf686c40 > ACPI: SSDT (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20050309) @ 0xdf687049 > ACPI: SSDT (v001 DpgPmm CpuPm 0x00000010 INTL 0x20050309) @ 0xdf687452 > ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050309) @ 0x00000000 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) > ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at e1000000 (gap: e0000000:10000000) > Detected 2992.724 MHz processor. > Built 1 zonelists. Total pages: 907929 > Kernel command line: BOOT_IMAGE=3D(hd0,1)/linux/bzc1 root=3D/dev/sda2 res= ume=3D/dev/sda3 testing_only=3D"this is got to be good. Now I can send in a= very long line just like 2.4 and need not worry about the line being too l= ong. What a great way to start a great year!!! Cool!" > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 3625948k/3660312k available (2402k kernel code, 33292k reserved, = 848k data, 200k init, 2742808k highmem) > virtual kernel memory layout: > fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc0433000 - 0xc0465000 ( 200 kB) > .data : 0xc0358928 - 0xc042cab4 ( 848 kB) > .text : 0xc0100000 - 0xc0358928 (2402 kB) > Checking if this processor honours the WP bit even in supervisor mode... = Ok. > Using HPET for base-timer > Calibrating delay using timer specific routine.. 5990.52 BogoMIPS (lpj=3D= 11981048) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 00= 00649d 00000000 00000001 > monitor/mwait feature present. > using mwait in idle threads. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d = 00000000 00000001 > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > ACPI: Core revision 20060707 > CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 > SMP alternatives: switching to SMP code > Booting processor 1/1 eip 3000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 5985.35 BogoMIPS (lpj=3D= 11970701) > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 00= 00649d 00000000 00000001 > monitor/mwait feature present. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d = 00000000 00000001 > CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 > Total of 2 processors activated (11975.87 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 > checking TSC synchronization across 2 CPUs: passed. > Brought up 2 CPUs > migration_cost=3D327 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using MMCONFIG > Setting up standard PCI resources > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > Boot video device is 0000:00:02.0 > PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO > PCI quirk: region 0880-08bf claimed by ICH6 GPIO > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabl= ed. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 10 devices > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a= report > PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 > PCI: Cannot allocate resource region 0 of device 0000:00:02.0 > PCI: Cannot allocate resource region 3 of device 0000:00:02.0 > PCI: Cannot allocate resource region 0 of device 0000:00:02.1 > PCI: Cannot allocate resource region 0 of device 0000:00:1d.7 > PCI: Cannot allocate resource region 2 of device 0000:00:1e.2 > PCI: Cannot allocate resource region 3 of device 0000:00:1e.2 > PCI: Cannot allocate resource region 0 of device 0000:02:00.0 > NET: Registered protocol family 23 > pnp: 00:01: ioport range 0x800-0x85f could not be reserved > pnp: 00:01: ioport range 0xc00-0xc7f has been reserved > pnp: 00:01: ioport range 0x860-0x8ff could not be reserved > pnp: 00:09: ioport range 0x100-0x1fe has been reserved > pnp: 00:09: ioport range 0x200-0x277 has been reserved > pnp: 00:09: ioport range 0x280-0x2e7 has been reserved > pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved > pnp: 00:09: ioport range 0x300-0x377 has been reserved > pnp: 00:09: ioport range 0x380-0x3bb has been reserved > pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved > pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 > PCI: Failed to allocate mem resource #8:100000@e1000000 for 0000:00:1c.0 > PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.0 > PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.1 > PCI: Failed to allocate mem resource #3:40000@e1000000 for 0000:00:02.0 > PCI: Failed to allocate mem resource #0:400@e1000000 for 0000:00:1d.7 > PCI: Failed to allocate mem resource #2:200@e1000000 for 0000:00:1e.2 > PCI: Failed to allocate mem resource #3:100@e1000000 for 0000:00:1e.2 > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Failed to allocate mem resource #0:10000@0 for 0000:02:00.0 > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.1 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 262144 (order: 9, 3145728 bytes) > TCP bind hash table entries: 65536 (order: 7, 786432 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > Simple Boot Flag at 0x7a set to 0x1 > apm: disabled - APM is not SMP safe. > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > Allocate Port Service[0000:00:01.0:pcie03] > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > Allocate Port Service[0000:00:1c.0:pcie03] > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.1:pcie00] > Allocate Port Service[0000:00:1c.1:pcie02] > Allocate Port Service[0000:00:1c.1:pcie03] > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > acpiphp_glue: can't get bus number, assuming 0 > acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed > pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 > Evaluate _OSC Set fails. Status =3D 0x0005 > Evaluate _OSC Set fails. Status =3D 0x0005 > pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0 > pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 > Evaluate _OSC Set fails. Status =3D 0x0005 > Evaluate _OSC Set fails. Status =3D 0x0005 > pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1 > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > ACPI: Power Button (FF) [PWRF] > ACPI: Power Button (CM) [VBTN] > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is n= ot present [20060707] > ACPI: Getting cpuindex for acpiid 0x3 > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is n= ot present [20060707] > ACPI: Getting cpuindex for acpiid 0x4 > ibm_acpi: ec object not found > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.101 (c) Dave Jones > agpgart: Detected an Intel 945G Chipset. > agpgart: Detected 7932K stolen memory. > agpgart: AGP aperture is 256M @ 0xe0000000 > [drm] Initialized drm 1.0.1 20051102 > RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize > loop: loaded (max 8 devices) > HP CISS Driver (v 3.6.10) > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus= =3Dxx > ICH7: IDE controller at PCI slot 0000:00:1f.1 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 > ICH7: chipset revision 1 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > Probing IDE interface ide0... > hda: HL-DT-ST DVD+/-RW GWA4164B, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) > megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) > megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 > libata version 2.00 loaded. > ata_piix 0000:00:1f.2: version 2.00ac6 > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18 > ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18 > scsi0 : ata_piix > ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) > ata1.00: ata1: dev 0 multi count 8 > ata1.01: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) > ata1.01: ata1: dev 1 multi count 8 > ata1.00: configured for UDMA/133 > ata1.01: configured for UDMA/133 > scsi1 : ata_piix > ata2: port is slow to respond, please be patient (Status 0xff) > ata2: port failed to respond (30 secs, Status 0xff) > ata2: SRST failed (status 0xFF) > ata2: SRST failed (err_mask=3D0x100) > ata2: softreset failed, retrying in 5 secs > ata2: SRST failed (status 0xFF) > ata2: SRST failed (err_mask=3D0x100) > ata2: softreset failed, retrying in 5 secs > ata2: SRST failed (status 0xFF) > ata2: SRST failed (err_mask=3D0x100) > ata2: reset failed, giving up > scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI= : 5 > SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 = sda13 sda14 sda15 > > sd 0:0:0:0: Attached scsi disk sda > scsi 0:0:1:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI= : 5 > SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > sdb: > sd 0:0:1:0: Attached scsi disk sdb > usbmon: debugfs is not available > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19 > ACPI: PCI interrupt for device 0000:00:1d.7 disabled > ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -16 > ehci_hcd: probe of 0000:00:1d.7 failed with error -16 > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ff60 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ff40 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000ff20 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > usb 3-1: new low speed USB device using uhci_hcd and address 2 > usb 3-1: configuration #1 chosen from 1 choice > usb 3-2: new low speed USB device using uhci_hcd and address 3 > usb 3-2: configuration #1 chosen from 1 choice > usbcore: registered new interface driver hiddev > input: Dell Dell USB Keyboard as /class/input/input0 > input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.= 2-1 > input: USB Optical Mouse as /class/input/input1 > input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2 > usbcore: registered new interface driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@red= hat.com > EDAC MC: Ver: 2.0.1 Nov 5 2006 > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Starting balanced_irq > Using IPI No-Shortcut mode > Time: tsc clocksource has been installed. > ACPI: (supports S0 S1 S3 S4 S5) > VFS: Mounted root (reiserfs filesystem) readonly. > Freeing unused kernel memory: 200k freed > Adding 7823644k swap on /dev/sda3. Priority:-1 extents:1 across:7823644k > tg3.c:v3.67 (October 18, 2006) > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > tg3: Cannot find proper PCI device base address, aborting. > ACPI: PCI interrupt for device 0000:02:00.0 disabled > ip_tables: (C) 2000-2006 Netfilter Core Team > ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntr= ack > > > > 2) booting with "Direct" ... > > Linux version 2.6.19-rc4 (root@indiana.corp.fedex.com) (gcc version 3.4.5= ) #5 SMP PREEMPT Sun Nov 5 17:24:04 SGT 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 00000000df686c00 (usable) > BIOS-e820: 00000000df686c00 - 00000000df688c00 (ACPI NVS) > BIOS-e820: 00000000df688c00 - 00000000df68ac00 (ACPI data) > BIOS-e820: 00000000df68ac00 - 00000000e0000000 (reserved) > BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) > BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > 2678MB HIGHMEM available. > 896MB LOWMEM available. > found SMP MP-table at 000fe710 > Entering add_active_range(0, 0, 915078) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 229376 > HighMem 229376 -> 915078 > early_node_map[1] active PFN ranges > 0: 0 -> 915078 > On node 0 totalpages: 915078 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1760 pages used for memmap > Normal zone: 223520 pages, LIFO batch:31 > HighMem zone: 5357 pages used for memmap > HighMem zone: 680345 pages, LIFO batch:31 > DMI 2.3 present. > ACPI: RSDP @ 0x000feb00/0x0024 (v002 DELL ) > ACPI: XSDT @ 0x000fd253/0x0074 (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: FACP @ 0x000fd34b/0x00F4 (v003 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: DSDT @ 0xfffd2b0e/0x3D69 (v001 DELL dt_ex 0x00001000 INTL 0x20= 050309) > ACPI: FACS @ 0xdf686c00/0x0040 > ACPI: SSDT @ 0xfffd6996/0x00AA (v001 DELL st_ex 0x00001000 INTL 0x20= 050309) > ACPI: APIC @ 0x000fd43f/0x0072 (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: BOOT @ 0x000fd4b1/0x0028 (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: ASF! @ 0x000fd4d9/0x0067 (v016 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: MCFG @ 0x000fd540/0x003E (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: HPET @ 0x000fd57e/0x0038 (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: SSDT @ 0xdf686c40/0x0175 (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20= 050309) > ACPI: SSDT @ 0xdf687049/0x0175 (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20= 050309) > ACPI: SSDT @ 0xdf687452/0x0140 (v001 DpgPmm CpuPm 0x00000010 INTL 0x20= 050309) > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > Processor #1 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) > ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > ACPI: HPET id: 0x8086a201 base: 0xfed00000 > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at e1000000 (gap: e0000000:10000000) > Detected 2992.778 MHz processor. > Built 1 zonelists. Total pages: 907929 > Kernel command line: BOOT_IMAGE=3D(hd0,1)/linux/bzc1 root=3D/dev/sda2 res= ume=3D/dev/sda3 testing_only=3D"this is got to be good. Now I can send in a= very long line just like 2.4 and need not worry about the line being too l= ong. What a great way to start a great year!!! Cool!" > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 3625956k/3660312k available (2399k kernel code, 33284k reserved, = 847k data, 200k init, 2742808k highmem) > virtual kernel memory layout: > fixmap : 0xfff50000 - 0xfffff000 ( 700 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc0431000 - 0xc0463000 ( 200 kB) > .data : 0xc0357d28 - 0xc042bab4 ( 847 kB) > .text : 0xc0100000 - 0xc0357d28 (2399 kB) > Checking if this processor honours the WP bit even in supervisor mode... = Ok. > Using HPET for base-timer > Calibrating delay using timer specific routine.. 5990.58 BogoMIPS (lpj=3D= 11981166) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 00= 00649d 00000000 00000001 > monitor/mwait feature present. > using mwait in idle threads. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d = 00000000 00000001 > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > ACPI: Core revision 20061011 > CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 > SMP alternatives: switching to SMP code > Booting processor 1/1 eip 3000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 5985.36 BogoMIPS (lpj=3D= 11970720) > CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 00= 00649d 00000000 00000001 > monitor/mwait feature present. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 1024K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d = 00000000 00000001 > CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 > Total of 2 processors activated (11975.94 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 > checking TSC synchronization across 2 CPUs: passed. > Brought up 2 CPUs > migration_cost=3D317 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xfb898, last bus=3D4 > Setting up standard PCI resources > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 > Boot video device is 0000:00:02.0 > PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO > PCI quirk: region 0880-08bf claimed by ICH6 GPIO > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabl= ed. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 10 devices > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a= report > NET: Registered protocol family 23 > pnp: 00:01: ioport range 0x800-0x85f could not be reserved > pnp: 00:01: ioport range 0xc00-0xc7f has been reserved > pnp: 00:01: ioport range 0x860-0x8ff could not be reserved > pnp: 00:09: ioport range 0x100-0x1fe has been reserved > pnp: 00:09: ioport range 0x200-0x277 has been reserved > pnp: 00:09: ioport range 0x280-0x2e7 has been reserved > pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved > pnp: 00:09: ioport range 0x300-0x377 has been reserved > pnp: 00:09: ioport range 0x380-0x3bb has been reserved > pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved > pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: fe900000-fe9fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: fe800000-fe8fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.1 > IO window: disabled. > MEM window: fe700000-fe7fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 262144 (order: 9, 3145728 bytes) > TCP bind hash table entries: 65536 (order: 7, 786432 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > Simple Boot Flag at 0x7a set to 0x1 > apm: disabled - APM is not SMP safe. > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > PCI: Setting latency timer of device 0000:00:1c.1 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.1:pcie00] > Allocate Port Service[0000:00:1c.1:pcie02] > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > acpiphp_glue: can't get bus number, assuming 0 > acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed > pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 > Evaluate _OSC Set fails. Status =3D 0x0005 > Evaluate _OSC Set fails. Status =3D 0x0005 > pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0 > pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 > Evaluate _OSC Set fails. Status =3D 0x0005 > Evaluate _OSC Set fails. Status =3D 0x0005 > pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1 > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > ACPI: Power Button (FF) [PWRF] > ACPI: Power Button (CM) [VBTN] > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is n= ot present [20061011] > ACPI: Getting cpuindex for acpiid 0x3 > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is n= ot present [20061011] > ACPI: Getting cpuindex for acpiid 0x4 > ibm_acpi: ec object not found > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.101 (c) Dave Jones > agpgart: Detected an Intel 945G Chipset. > agpgart: Detected 7932K stolen memory. > agpgart: AGP aperture is 256M @ 0xe0000000 > [drm] Initialized drm 1.0.1 20051102 > RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize > loop: loaded (max 8 devices) > HP CISS Driver (v 3.6.10) > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus= =3Dxx > ICH7: IDE controller at PCI slot 0000:00:1f.1 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 > ICH7: chipset revision 1 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > Probing IDE interface ide0... > hda: HL-DT-ST DVD+/-RW GWA4164B, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) > megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) > megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 > libata version 2.00 loaded. > ata_piix 0000:00:1f.2: version 2.00ac6 > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18 > ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18 > scsi0 : ata_piix > ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) > ata1.00: ata1: dev 0 multi count 8 > ata1.01: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) > ata1.01: ata1: dev 1 multi count 8 > ata1.00: configured for UDMA/133 > ata1.01: configured for UDMA/133 > scsi1 : ata_piix > ata2: port is slow to respond, please be patient (Status 0xff) > ata2: port failed to respond (30 secs, Status 0xff) > ata2: SRST failed (status 0xFF) > ata2: SRST failed (err_mask=3D0x100) > ata2: softreset failed, retrying in 5 secs > ata2: SRST failed (status 0xFF) > ata2: SRST failed (err_mask=3D0x100) > ata2: softreset failed, retrying in 5 secs > ata2: SRST failed (status 0xFF) > ata2: SRST failed (err_mask=3D0x100) > ata2: reset failed, giving up > scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI= : 5 > SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 = sda13 sda14 sda15 > > sd 0:0:0:0: Attached scsi disk sda > scsi 0:0:1:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI= : 5 > SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > sdb: > sd 0:0:1:0: Attached scsi disk sdb > usbmon: debugfs is not available > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ff60 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ff40 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000ff20 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > usb 4-1: new low speed USB device using uhci_hcd and address 2 > usb 4-1: configuration #1 chosen from 1 choice > usb 4-2: new low speed USB device using uhci_hcd and address 3 > usb 4-2: configuration #1 chosen from 1 choice > usbcore: registered new interface driver hiddev > input: Dell Dell USB Keyboard as /class/input/input0 > input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.= 2-1 > input: USB Optical Mouse as /class/input/input1 > input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2 > usbcore: registered new interface driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@red= hat.com > EDAC MC: Ver: 2.0.1 Nov 5 2006 > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Starting balanced_irq > Using IPI No-Shortcut mode > Time: tsc clocksource has been installed. > ACPI: (supports S0 S1 S3 S4 S5) > VFS: Mounted root (reiserfs filesystem) readonly. > Freeing unused kernel memory: 200k freed > Adding 7823644k swap on /dev/sda3. Priority:-1 extents:1 across:7823644k > tg3.c:v3.67 (October 18, 2006) > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/1= 00/1000BaseT Ethernet 00:13:72:7b:2a:f0 > eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOc= ap[1] > eth0: dma_rwctrl[76180000] dma_mask[64-bit] > ip_tables: (C) 2000-2006 Netfilter Core Team > ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntr= ack > tg3: eth0: Link is up at 100 Mbps, full duplex. > tg3: eth0: Flow control is on for TX and on for RX. > > > > > 3) diff of (1) and (2). Note I've also patched acpi with > (acpi-test-20061011-2.6.19-rc3.diff.bz2), but with or without that patch, > tg3 still fails. > > 1c1 > < Linux version 2.6.19-rc4 (root@indiana.corp.fedex.com) (gcc version 3.4= .5) #1 SMP PREEMPT Sun Nov 5 17:18:48 SGT 2006 > --- > > Linux version 2.6.19-rc4 (root@indiana.corp.fedex.com) (gcc version 3.4= .5) #5 SMP PREEMPT Sun Nov 5 17:24:04 SGT 2006 > 33,45c33,46 > < ACPI: RSDP (v002 DELL ) @ 0x000feb00 > < ACPI: XSDT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd2= 53 > < ACPI: FADT (v003 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd3= 4b > < ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050309) @ 0xfffd69= 96 > < ACPI: MADT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4= 3f > < ACPI: BOOT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4= b1 > < ACPI: ASF! (v016 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4= d9 > < ACPI: MCFG (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd5= 40 > < ACPI: HPET (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd5= 7e > < ACPI: SSDT (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20050309) @ 0xdf686c= 40 > < ACPI: SSDT (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20050309) @ 0xdf6870= 49 > < ACPI: SSDT (v001 DpgPmm CpuPm 0x00000010 INTL 0x20050309) @ 0xdf6874= 52 > < ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050309) @ 0x000000= 00 > --- > > ACPI: RSDP @ 0x000feb00/0x0024 (v002 DELL ) > > ACPI: XSDT @ 0x000fd253/0x0074 (v001 DELL GX620 0x00000007 ASL 0x= 00000061) > > ACPI: FACP @ 0x000fd34b/0x00F4 (v003 DELL GX620 0x00000007 ASL 0x= 00000061) > > ACPI: DSDT @ 0xfffd2b0e/0x3D69 (v001 DELL dt_ex 0x00001000 INTL 0x= 20050309) > > ACPI: FACS @ 0xdf686c00/0x0040 > > ACPI: SSDT @ 0xfffd6996/0x00AA (v001 DELL st_ex 0x00001000 INTL 0x= 20050309) > > ACPI: APIC @ 0x000fd43f/0x0072 (v001 DELL GX620 0x00000007 ASL 0x= 00000061) > > ACPI: BOOT @ 0x000fd4b1/0x0028 (v001 DELL GX620 0x00000007 ASL 0x= 00000061) > > ACPI: ASF! @ 0x000fd4d9/0x0067 (v016 DELL GX620 0x00000007 ASL 0x= 00000061) > > ACPI: MCFG @ 0x000fd540/0x003E (v001 DELL GX620 0x00000007 ASL 0x= 00000061) > > ACPI: HPET @ 0x000fd57e/0x0038 (v001 DELL GX620 0x00000007 ASL 0x= 00000061) > > ACPI: SSDT @ 0xdf686c40/0x0175 (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x= 20050309) > > ACPI: SSDT @ 0xdf687049/0x0175 (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x= 20050309) > > ACPI: SSDT @ 0xdf687452/0x0140 (v001 DpgPmm CpuPm 0x00000010 INTL 0x= 20050309) > 66c67 > < Detected 2992.724 MHz processor. > --- > > Detected 2992.778 MHz processor. > 78c79 > < Memory: 3625948k/3660312k available (2402k kernel code, 33292k reserved= , 848k data, 200k init, 2742808k highmem) > --- > > Memory: 3625956k/3660312k available (2399k kernel code, 33284k reserved= , 847k data, 200k init, 2742808k highmem) > 80c81 > < fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) > --- > > fixmap : 0xfff50000 - 0xfffff000 ( 700 kB) > 84,86c85,87 > < .init : 0xc0433000 - 0xc0465000 ( 200 kB) > < .data : 0xc0358928 - 0xc042cab4 ( 848 kB) > < .text : 0xc0100000 - 0xc0358928 (2402 kB) > --- > > .init : 0xc0431000 - 0xc0463000 ( 200 kB) > > .data : 0xc0357d28 - 0xc042bab4 ( 847 kB) > > .text : 0xc0100000 - 0xc0357d28 (2399 kB) > 89c90 > < Calibrating delay using timer specific routine.. 5990.52 BogoMIPS (lpj= =3D11981048) > --- > > Calibrating delay using timer specific routine.. 5990.58 BogoMIPS (lpj= =3D11981166) > 102c103 > < ACPI: Core revision 20060707 > --- > > ACPI: Core revision 20061011 > 107c108 > < Calibrating delay using timer specific routine.. 5985.35 BogoMIPS (lpj= =3D11970701) > --- > > Calibrating delay using timer specific routine.. 5985.36 BogoMIPS (lpj= =3D11970720) > 116c117 > < Total of 2 processors activated (11975.87 BogoMIPS). > --- > > Total of 2 processors activated (11975.94 BogoMIPS). > 121c122 > < migration_cost=3D327 > --- > > migration_cost=3D317 > 124c125 > < PCI: Using MMCONFIG > --- > > PCI: PCI BIOS revision 2.10 entry at 0xfb898, last bus=3D4 > 158,167d158 > < PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0 > < PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 > < PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 > < PCI: Cannot allocate resource region 0 of device 0000:00:02.0 > < PCI: Cannot allocate resource region 3 of device 0000:00:02.0 > < PCI: Cannot allocate resource region 0 of device 0000:00:02.1 > < PCI: Cannot allocate resource region 0 of device 0000:00:1d.7 > < PCI: Cannot allocate resource region 2 of device 0000:00:1e.2 > < PCI: Cannot allocate resource region 3 of device 0000:00:1e.2 > < PCI: Cannot allocate resource region 0 of device 0000:02:00.0 > 181,187d171 > < PCI: Failed to allocate mem resource #8:100000@e1000000 for 0000:00:1c.0 > < PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.0 > < PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.1 > < PCI: Failed to allocate mem resource #3:40000@e1000000 for 0000:00:02.0 > < PCI: Failed to allocate mem resource #0:400@e1000000 for 0000:00:1d.7 > < PCI: Failed to allocate mem resource #2:200@e1000000 for 0000:00:1e.2 > < PCI: Failed to allocate mem resource #3:100@e1000000 for 0000:00:1e.2 > 190c174 > < MEM window: disabled. > --- > > MEM window: fe900000-fe9fffff > 192d175 > < PCI: Failed to allocate mem resource #0:10000@0 for 0000:02:00.0 > 195c178 > < MEM window: disabled. > --- > > MEM window: fe800000-fe8fffff > 199c182 > < MEM window: disabled. > --- > > MEM window: fe700000-fe7fffff > 229d211 > < Allocate Port Service[0000:00:01.0:pcie03] > 234d215 > < Allocate Port Service[0000:00:1c.0:pcie03] > 239d219 > < Allocate Port Service[0000:00:1c.1:pcie03] > 255c235 > < ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is= not present [20060707] > --- > > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is= not present [20061011] > 257c237 > < ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is= not present [20060707] > --- > > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is= not present [20061011] > 333,335c313,322 > < ACPI: PCI interrupt for device 0000:00:1d.7 disabled > < ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -16 > < ehci_hcd: probe of 0000:00:1d.7 failed with error -16 > --- > > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > > ehci_hcd 0000:00:1d.7: EHCI Host Controller > > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > > ehci_hcd 0000:00:1d.7: debug port 1 > > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > > ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800 > > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > > usb usb1: configuration #1 chosen from 1 choice > > hub 1-0:1.0: USB hub found > > hub 1-0:1.0: 8 ports detected > 340c327 > < uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > --- > > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > 342,344c329,331 > < usb usb1: configuration #1 chosen from 1 choice > < hub 1-0:1.0: USB hub found > < hub 1-0:1.0: 2 ports detected > --- > > usb usb2: configuration #1 chosen from 1 choice > > hub 2-0:1.0: USB hub found > > hub 2-0:1.0: 2 ports detected > 348c335 > < uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > --- > > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > 350,352c337,339 > < usb usb2: configuration #1 chosen from 1 choice > < hub 2-0:1.0: USB hub found > < hub 2-0:1.0: 2 ports detected > --- > > usb usb3: configuration #1 chosen from 1 choice > > hub 3-0:1.0: USB hub found > > hub 3-0:1.0: 2 ports detected > 356c343 > < uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 > --- > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > 358,360c345,347 > < usb usb3: configuration #1 chosen from 1 choice > < hub 3-0:1.0: USB hub found > < hub 3-0:1.0: 2 ports detected > --- > > usb usb4: configuration #1 chosen from 1 choice > > hub 4-0:1.0: USB hub found > > hub 4-0:1.0: 2 ports detected > 364c351 > < uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 > --- > > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > 366,372c353,359 > < usb usb4: configuration #1 chosen from 1 choice > < hub 4-0:1.0: USB hub found > < hub 4-0:1.0: 2 ports detected > < usb 3-1: new low speed USB device using uhci_hcd and address 2 > < usb 3-1: configuration #1 chosen from 1 choice > < usb 3-2: new low speed USB device using uhci_hcd and address 3 > < usb 3-2: configuration #1 chosen from 1 choice > --- > > usb usb5: configuration #1 chosen from 1 choice > > hub 5-0:1.0: USB hub found > > hub 5-0:1.0: 2 ports detected > > usb 4-1: new low speed USB device using uhci_hcd and address 2 > > usb 4-1: configuration #1 chosen from 1 choice > > usb 4-2: new low speed USB device using uhci_hcd and address 3 > > usb 4-2: configuration #1 chosen from 1 choice > 398,399c385,388 > < tg3: Cannot find proper PCI device base address, aborting. > < ACPI: PCI interrupt for device 0000:02:00.0 disabled > --- > > PCI: Setting latency timer of device 0000:02:00.0 to 64 > > eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10= /100/1000BaseT Ethernet 00:13:72:7b:2a:f0 > > eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TS= Ocap[1] > > eth0: dma_rwctrl[76180000] dma_mask[64-bit] > 401a391,392 > > tg3: eth0: Link is up at 100 Mbps, full duplex. > > tg3: eth0: Flow control is on for TX and on for RX. > > > > > Thanks, > Jeff >