From: Jeff Chua Subject: Re: [discuss] Re: 2.6.19-rc4: known unfixed regressions (v3) Date: Tue, 7 Nov 2006 06:40:39 +0800 (SGT) Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Cc: Andrew Morton , len.brown@intel.com, Komuro , linux-pm@osdl.org, Ernst Herzberg , Christian , Alex Romosan , openib-general@openib.org, Linux Kernel Mailing List , linux-ide@vger.kernel.org, Linus Torvalds , oprofile-list@lists.sourceforge.net, Jens Axboe , linux-pci@atrey.karlin.mff.cuni.cz, Elimar Riesebieter , discuss@x86-64.org, Thierry Vignaud , Tim Chen , phil.el@wanadoo.fr, gregkh@suse.de, neilb@cse.unsw.edu.au, Adrian Bunk , linux-acpi@vger.kernel.org, mingo@redhat.com, nfs@lists.sourceforge.net, "Eric W. Biederman" , cpufreq@lists.linux.org.uk, "Michael S. Ts Return-path: To: Andi Kleen List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.osdl.org Errors-To: linux-pm-bounces@lists.osdl.org List-ID: On 11/7/06, Andi Kleen wrote: > > Here's results with vanilla 2.6.19-rc4 (gcc version 3.4.5) ... > > 1) PCI access mode (Any) ... FAILED > > 2) PCI access mode (MMConfig) ... FAILED > Full boot log please? 1) booting with MMConfig ... Linux version 2.6.19-rc4 (root@indiana.corp.fedex.com) (gcc version 3.4.5) = #1 SMP PREEMPT Sun Nov 5 17:18:48 SGT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000df686c00 (usable) BIOS-e820: 00000000df686c00 - 00000000df688c00 (ACPI NVS) BIOS-e820: 00000000df688c00 - 00000000df68ac00 (ACPI data) BIOS-e820: 00000000df68ac00 - 00000000e0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 2678MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 Entering add_active_range(0, 0, 915078) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 915078 early_node_map[1] active PFN ranges 0: 0 -> 915078 On node 0 totalpages: 915078 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 5357 pages used for memmap HighMem zone: 680345 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 DELL ) @ 0x000feb00 ACPI: XSDT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd253 ACPI: FADT (v003 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd34b ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050309) @ 0xfffd6996 ACPI: MADT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd43f ACPI: BOOT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4b1 ACPI: ASF! (v016 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4d9 ACPI: MCFG (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd540 ACPI: HPET (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd57e ACPI: SSDT (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20050309) @ 0xdf686c40 ACPI: SSDT (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20050309) @ 0xdf687049 ACPI: SSDT (v001 DpgPmm CpuPm 0x00000010 INTL 0x20050309) @ 0xdf687452 ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050309) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e1000000 (gap: e0000000:10000000) Detected 2992.724 MHz processor. Built 1 zonelists. Total pages: 907929 Kernel command line: BOOT_IMAGE=3D(hd0,1)/linux/bzc1 root=3D/dev/sda2 resum= e=3D/dev/sda3 testing_only=3D"this is got to be good. Now I can send in a v= ery long line just like 2.4 and need not worry about the line being too lon= g. What a great way to start a great year!!! Cool!" mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3625948k/3660312k available (2402k kernel code, 33292k reserved, 84= 8k data, 200k init, 2742808k highmem) virtual kernel memory layout: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0433000 - 0xc0465000 ( 200 kB) .data : 0xc0358928 - 0xc042cab4 ( 848 kB) .text : 0xc0100000 - 0xc0358928 (2402 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Using HPET for base-timer Calibrating delay using timer specific routine.. 5990.52 BogoMIPS (lpj=3D11= 981048) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000= 649d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00= 000000 00000001 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5985.35 BogoMIPS (lpj=3D11= 970701) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000= 649d 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00= 000000 00000001 CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 Total of 2 processors activated (11975.87 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=3D327 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 0 of device 0000:00:02.0 PCI: Cannot allocate resource region 3 of device 0000:00:02.0 PCI: Cannot allocate resource region 0 of device 0000:00:02.1 PCI: Cannot allocate resource region 0 of device 0000:00:1d.7 PCI: Cannot allocate resource region 2 of device 0000:00:1e.2 PCI: Cannot allocate resource region 3 of device 0000:00:1e.2 PCI: Cannot allocate resource region 0 of device 0000:02:00.0 NET: Registered protocol family 23 pnp: 00:01: ioport range 0x800-0x85f could not be reserved pnp: 00:01: ioport range 0xc00-0xc7f has been reserved pnp: 00:01: ioport range 0x860-0x8ff could not be reserved pnp: 00:09: ioport range 0x100-0x1fe has been reserved pnp: 00:09: ioport range 0x200-0x277 has been reserved pnp: 00:09: ioport range 0x280-0x2e7 has been reserved pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved pnp: 00:09: ioport range 0x300-0x377 has been reserved pnp: 00:09: ioport range 0x380-0x3bb has been reserved pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Failed to allocate mem resource #8:100000@e1000000 for 0000:00:1c.0 PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.0 PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.1 PCI: Failed to allocate mem resource #3:40000@e1000000 for 0000:00:02.0 PCI: Failed to allocate mem resource #0:400@e1000000 for 0000:00:1d.7 PCI: Failed to allocate mem resource #2:200@e1000000 for 0000:00:1e.2 PCI: Failed to allocate mem resource #3:100@e1000000 for 0000:00:1e.2 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Failed to allocate mem resource #0:10000@0 for 0000:02:00.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x7a set to 0x1 apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status =3D 0x0005 Evaluate _OSC Set fails. Status =3D 0x0005 pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0 pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status =3D 0x0005 Evaluate _OSC Set fails. Status =3D 0x0005 pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [VBTN] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not= present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not= present [20060707] ACPI: Getting cpuindex for acpiid 0x4 ibm_acpi: ec object not found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945G Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 3.6.10) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: HL-DT-ST DVD+/-RW GWA4164B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18 ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 8 ata1.01: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) ata1.01: ata1: dev 1 multi count 8 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : ata_piix ata2: port is slow to respond, please be patient (Status 0xff) ata2: port failed to respond (30 secs, Status 0xff) ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=3D0x100) ata2: softreset failed, retrying in 5 secs ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=3D0x100) ata2: softreset failed, retrying in 5 secs ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=3D0x100) ata2: reset failed, giving up scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sd= a13 sda14 sda15 > sd 0:0:0:0: Attached scsi disk sda scsi 0:0:1:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sd 0:0:1:0: Attached scsi disk sdb usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19 ACPI: PCI interrupt for device 0000:00:1d.7 disabled ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -16 ehci_hcd: probe of 0000:00:1d.7 failed with error -16 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ff60 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ff40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000ff20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Dell Dell USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1 input: USB Optical Mouse as /class/input/input1 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redha= t.com EDAC MC: Ver: 2.0.1 Nov 5 2006 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Time: tsc clocksource has been installed. ACPI: (supports S0 S1 S3 S4 S5) VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 200k freed Adding 7823644k swap on /dev/sda3. Priority:-1 extents:1 across:7823644k tg3.c:v3.67 (October 18, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 tg3: Cannot find proper PCI device base address, aborting. ACPI: PCI interrupt for device 0000:02:00.0 disabled ip_tables: (C) 2000-2006 Netfilter Core Team ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack 2) booting with "Direct" ... Linux version 2.6.19-rc4 (root@indiana.corp.fedex.com) (gcc version 3.4.5) = #5 SMP PREEMPT Sun Nov 5 17:24:04 SGT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000df686c00 (usable) BIOS-e820: 00000000df686c00 - 00000000df688c00 (ACPI NVS) BIOS-e820: 00000000df688c00 - 00000000df68ac00 (ACPI data) BIOS-e820: 00000000df68ac00 - 00000000e0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 2678MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 Entering add_active_range(0, 0, 915078) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 915078 early_node_map[1] active PFN ranges 0: 0 -> 915078 On node 0 totalpages: 915078 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 5357 pages used for memmap HighMem zone: 680345 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP @ 0x000feb00/0x0024 (v002 DELL ) ACPI: XSDT @ 0x000fd253/0x0074 (v001 DELL GX620 0x00000007 ASL 0x0000= 0061) ACPI: FACP @ 0x000fd34b/0x00F4 (v003 DELL GX620 0x00000007 ASL 0x0000= 0061) ACPI: DSDT @ 0xfffd2b0e/0x3D69 (v001 DELL dt_ex 0x00001000 INTL 0x2005= 0309) ACPI: FACS @ 0xdf686c00/0x0040 ACPI: SSDT @ 0xfffd6996/0x00AA (v001 DELL st_ex 0x00001000 INTL 0x2005= 0309) ACPI: APIC @ 0x000fd43f/0x0072 (v001 DELL GX620 0x00000007 ASL 0x0000= 0061) ACPI: BOOT @ 0x000fd4b1/0x0028 (v001 DELL GX620 0x00000007 ASL 0x0000= 0061) ACPI: ASF! @ 0x000fd4d9/0x0067 (v016 DELL GX620 0x00000007 ASL 0x0000= 0061) ACPI: MCFG @ 0x000fd540/0x003E (v001 DELL GX620 0x00000007 ASL 0x0000= 0061) ACPI: HPET @ 0x000fd57e/0x0038 (v001 DELL GX620 0x00000007 ASL 0x0000= 0061) ACPI: SSDT @ 0xdf686c40/0x0175 (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x2005= 0309) ACPI: SSDT @ 0xdf687049/0x0175 (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x2005= 0309) ACPI: SSDT @ 0xdf687452/0x0140 (v001 DpgPmm CpuPm 0x00000010 INTL 0x2005= 0309) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e1000000 (gap: e0000000:10000000) Detected 2992.778 MHz processor. Built 1 zonelists. Total pages: 907929 Kernel command line: BOOT_IMAGE=3D(hd0,1)/linux/bzc1 root=3D/dev/sda2 resum= e=3D/dev/sda3 testing_only=3D"this is got to be good. Now I can send in a v= ery long line just like 2.4 and need not worry about the line being too lon= g. What a great way to start a great year!!! Cool!" mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3625956k/3660312k available (2399k kernel code, 33284k reserved, 84= 7k data, 200k init, 2742808k highmem) virtual kernel memory layout: fixmap : 0xfff50000 - 0xfffff000 ( 700 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0431000 - 0xc0463000 ( 200 kB) .data : 0xc0357d28 - 0xc042bab4 ( 847 kB) .text : 0xc0100000 - 0xc0357d28 (2399 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Using HPET for base-timer Calibrating delay using timer specific routine.. 5990.58 BogoMIPS (lpj=3D11= 981166) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000= 649d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00= 000000 00000001 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20061011 CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5985.36 BogoMIPS (lpj=3D11= 970720) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000= 649d 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00= 000000 00000001 CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 07 Total of 2 processors activated (11975.94 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=3D317 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb898, last bus=3D4 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport NET: Registered protocol family 23 pnp: 00:01: ioport range 0x800-0x85f could not be reserved pnp: 00:01: ioport range 0xc00-0xc7f has been reserved pnp: 00:01: ioport range 0x860-0x8ff could not be reserved pnp: 00:09: ioport range 0x100-0x1fe has been reserved pnp: 00:09: ioport range 0x200-0x277 has been reserved pnp: 00:09: ioport range 0x280-0x2e7 has been reserved pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved pnp: 00:09: ioport range 0x300-0x377 has been reserved pnp: 00:09: ioport range 0x380-0x3bb has been reserved pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fe900000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: fe800000-fe8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: fe700000-fe7fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x7a set to 0x1 apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status =3D 0x0005 Evaluate _OSC Set fails. Status =3D 0x0005 pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0 pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status =3D 0x0005 Evaluate _OSC Set fails. Status =3D 0x0005 pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [VBTN] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not= present [20061011] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not= present [20061011] ACPI: Getting cpuindex for acpiid 0x4 ibm_acpi: ec object not found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945G Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 [drm] Initialized drm 1.0.1 20051102 RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 3.6.10) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: HL-DT-ST DVD+/-RW GWA4164B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18 ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 8 ata1.01: ATA-7, max UDMA/133, 488281250 sectors: LBA48 NCQ (depth 0/32) ata1.01: ata1: dev 1 multi count 8 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : ata_piix ata2: port is slow to respond, please be patient (Status 0xff) ata2: port failed to respond (30 secs, Status 0xff) ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=3D0x100) ata2: softreset failed, retrying in 5 secs ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=3D0x100) ata2: softreset failed, retrying in 5 secs ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=3D0x100) ata2: reset failed, giving up scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sd= a13 sda14 sda15 > sd 0:0:0:0: Attached scsi disk sda scsi 0:0:1:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sd 0:0:1:0: Attached scsi disk sdb usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ff60 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ff40 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000ff20 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usb 4-2: new low speed USB device using uhci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Dell Dell USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1 input: USB Optical Mouse as /class/input/input1 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redha= t.com EDAC MC: Ver: 2.0.1 Nov 5 2006 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode Time: tsc clocksource has been installed. ACPI: (supports S0 S1 S3 S4 S5) VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 200k freed Adding 7823644k swap on /dev/sda3. Priority:-1 extents:1 across:7823644k tg3.c:v3.67 (October 18, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100= /1000BaseT Ethernet 00:13:72:7b:2a:f0 eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap= [1] = eth0: dma_rwctrl[76180000] dma_mask[64-bit] ip_tables: (C) 2000-2006 Netfilter Core Team ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. 3) diff of (1) and (2). Note I've also patched acpi with = (acpi-test-20061011-2.6.19-rc3.diff.bz2), but with or without that patch, = tg3 still fails. 1c1 < Linux version 2.6.19-rc4 (root@indiana.corp.fedex.com) (gcc version 3.4.5= ) #1 SMP PREEMPT Sun Nov 5 17:18:48 SGT 2006 --- > Linux version 2.6.19-rc4 (root@indiana.corp.fedex.com) (gcc version 3.4.5= ) #5 SMP PREEMPT Sun Nov 5 17:24:04 SGT 2006 33,45c33,46 < ACPI: RSDP (v002 DELL ) @ 0x000feb00 < ACPI: XSDT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd253 < ACPI: FADT (v003 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd34b < ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050309) @ 0xfffd6996 < ACPI: MADT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd43f < ACPI: BOOT (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4b1 < ACPI: ASF! (v016 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd4d9 < ACPI: MCFG (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd540 < ACPI: HPET (v001 DELL GX620 0x00000007 ASL 0x00000061) @ 0x000fd57e < ACPI: SSDT (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20050309) @ 0xdf686c40 < ACPI: SSDT (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20050309) @ 0xdf687049 < ACPI: SSDT (v001 DpgPmm CpuPm 0x00000010 INTL 0x20050309) @ 0xdf687452 < ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050309) @ 0x00000000 --- > ACPI: RSDP @ 0x000feb00/0x0024 (v002 DELL ) > ACPI: XSDT @ 0x000fd253/0x0074 (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: FACP @ 0x000fd34b/0x00F4 (v003 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: DSDT @ 0xfffd2b0e/0x3D69 (v001 DELL dt_ex 0x00001000 INTL 0x20= 050309) > ACPI: FACS @ 0xdf686c00/0x0040 > ACPI: SSDT @ 0xfffd6996/0x00AA (v001 DELL st_ex 0x00001000 INTL 0x20= 050309) > ACPI: APIC @ 0x000fd43f/0x0072 (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: BOOT @ 0x000fd4b1/0x0028 (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: ASF! @ 0x000fd4d9/0x0067 (v016 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: MCFG @ 0x000fd540/0x003E (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: HPET @ 0x000fd57e/0x0038 (v001 DELL GX620 0x00000007 ASL 0x00= 000061) > ACPI: SSDT @ 0xdf686c40/0x0175 (v001 DpgPmm Cpu0Ist 0x00000011 INTL 0x20= 050309) > ACPI: SSDT @ 0xdf687049/0x0175 (v001 DpgPmm Cpu1Ist 0x00000011 INTL 0x20= 050309) > ACPI: SSDT @ 0xdf687452/0x0140 (v001 DpgPmm CpuPm 0x00000010 INTL 0x20= 050309) 66c67 < Detected 2992.724 MHz processor. --- > Detected 2992.778 MHz processor. 78c79 < Memory: 3625948k/3660312k available (2402k kernel code, 33292k reserved, = 848k data, 200k init, 2742808k highmem) --- > Memory: 3625956k/3660312k available (2399k kernel code, 33284k reserved, = 847k data, 200k init, 2742808k highmem) 80c81 < fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) --- > fixmap : 0xfff50000 - 0xfffff000 ( 700 kB) 84,86c85,87 < .init : 0xc0433000 - 0xc0465000 ( 200 kB) < .data : 0xc0358928 - 0xc042cab4 ( 848 kB) < .text : 0xc0100000 - 0xc0358928 (2402 kB) --- > .init : 0xc0431000 - 0xc0463000 ( 200 kB) > .data : 0xc0357d28 - 0xc042bab4 ( 847 kB) > .text : 0xc0100000 - 0xc0357d28 (2399 kB) 89c90 < Calibrating delay using timer specific routine.. 5990.52 BogoMIPS (lpj=3D= 11981048) --- > Calibrating delay using timer specific routine.. 5990.58 BogoMIPS (lpj=3D= 11981166) 102c103 < ACPI: Core revision 20060707 --- > ACPI: Core revision 20061011 107c108 < Calibrating delay using timer specific routine.. 5985.35 BogoMIPS (lpj=3D= 11970701) --- > Calibrating delay using timer specific routine.. 5985.36 BogoMIPS (lpj=3D= 11970720) 116c117 < Total of 2 processors activated (11975.87 BogoMIPS). --- > Total of 2 processors activated (11975.94 BogoMIPS). 121c122 < migration_cost=3D327 --- > migration_cost=3D317 124c125 < PCI: Using MMCONFIG --- > PCI: PCI BIOS revision 2.10 entry at 0xfb898, last bus=3D4 158,167d158 < PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0 < PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 < PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 < PCI: Cannot allocate resource region 0 of device 0000:00:02.0 < PCI: Cannot allocate resource region 3 of device 0000:00:02.0 < PCI: Cannot allocate resource region 0 of device 0000:00:02.1 < PCI: Cannot allocate resource region 0 of device 0000:00:1d.7 < PCI: Cannot allocate resource region 2 of device 0000:00:1e.2 < PCI: Cannot allocate resource region 3 of device 0000:00:1e.2 < PCI: Cannot allocate resource region 0 of device 0000:02:00.0 181,187d171 < PCI: Failed to allocate mem resource #8:100000@e1000000 for 0000:00:1c.0 < PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.0 < PCI: Failed to allocate mem resource #0:80000@e1000000 for 0000:00:02.1 < PCI: Failed to allocate mem resource #3:40000@e1000000 for 0000:00:02.0 < PCI: Failed to allocate mem resource #0:400@e1000000 for 0000:00:1d.7 < PCI: Failed to allocate mem resource #2:200@e1000000 for 0000:00:1e.2 < PCI: Failed to allocate mem resource #3:100@e1000000 for 0000:00:1e.2 190c174 < MEM window: disabled. --- > MEM window: fe900000-fe9fffff 192d175 < PCI: Failed to allocate mem resource #0:10000@0 for 0000:02:00.0 195c178 < MEM window: disabled. --- > MEM window: fe800000-fe8fffff 199c182 < MEM window: disabled. --- > MEM window: fe700000-fe7fffff 229d211 < Allocate Port Service[0000:00:01.0:pcie03] 234d215 < Allocate Port Service[0000:00:1c.0:pcie03] 239d219 < Allocate Port Service[0000:00:1c.1:pcie03] 255c235 < ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is n= ot present [20060707] --- > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is n= ot present [20061011] 257c237 < ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is n= ot present [20060707] --- > ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is n= ot present [20061011] 333,335c313,322 < ACPI: PCI interrupt for device 0000:00:1d.7 disabled < ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -16 < ehci_hcd: probe of 0000:00:1d.7 failed with error -16 --- > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected 340c327 < uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 --- > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 342,344c329,331 < usb usb1: configuration #1 chosen from 1 choice < hub 1-0:1.0: USB hub found < hub 1-0:1.0: 2 ports detected --- > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected 348c335 < uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 --- > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 350,352c337,339 < usb usb2: configuration #1 chosen from 1 choice < hub 2-0:1.0: USB hub found < hub 2-0:1.0: 2 ports detected --- > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected 356c343 < uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 --- > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 358,360c345,347 < usb usb3: configuration #1 chosen from 1 choice < hub 3-0:1.0: USB hub found < hub 3-0:1.0: 2 ports detected --- > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected 364c351 < uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 --- > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 366,372c353,359 < usb usb4: configuration #1 chosen from 1 choice < hub 4-0:1.0: USB hub found < hub 4-0:1.0: 2 ports detected < usb 3-1: new low speed USB device using uhci_hcd and address 2 < usb 3-1: configuration #1 chosen from 1 choice < usb 3-2: new low speed USB device using uhci_hcd and address 3 < usb 3-2: configuration #1 chosen from 1 choice --- > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > usb 4-1: new low speed USB device using uhci_hcd and address 2 > usb 4-1: configuration #1 chosen from 1 choice > usb 4-2: new low speed USB device using uhci_hcd and address 3 > usb 4-2: configuration #1 chosen from 1 choice 398,399c385,388 < tg3: Cannot find proper PCI device base address, aborting. < ACPI: PCI interrupt for device 0000:02:00.0 disabled --- > PCI: Setting latency timer of device 0000:02:00.0 to 64 > eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/1= 00/1000BaseT Ethernet 00:13:72:7b:2a:f0 > eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOc= ap[1] = > eth0: dma_rwctrl[76180000] dma_mask[64-bit] 401a391,392 > tg3: eth0: Link is up at 100 Mbps, full duplex. > tg3: eth0: Flow control is on for TX and on for RX. Thanks, Jeff