From: Deren Wu <[email protected]>
Due to the missing IEEE80211_RADIOTAP_HE_DATA1_BW_RU_ALLOC_KNOWN in
status report, the HE rate in wirehsark/tcpdump always shows wrong value.
Applications will refer to IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC
when the flag is set and shows the correct data rate.
Reviewed-by: Ryder Lee <[email protected]>
Signed-off-by: Deren Wu <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 6 ++++--
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 6 ++++--
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 47d5a993c9c7..e9e7efbf350d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -349,14 +349,16 @@ mt7915_mac_decode_he_radiotap(struct sk_buff *skb, __le32 *rxv, u32 mode)
case MT_PHY_TYPE_HE_SU:
he->data1 |= HE_BITS(DATA1_FORMAT_SU) |
HE_BITS(DATA1_UL_DL_KNOWN) |
- HE_BITS(DATA1_BEAM_CHANGE_KNOWN);
+ HE_BITS(DATA1_BEAM_CHANGE_KNOWN) |
+ HE_BITS(DATA1_BW_RU_ALLOC_KNOWN);
he->data3 |= HE_PREP(DATA3_BEAM_CHANGE, BEAM_CHNG, rxv[14]) |
HE_PREP(DATA3_UL_DL, UPLINK, rxv[2]);
break;
case MT_PHY_TYPE_HE_EXT_SU:
he->data1 |= HE_BITS(DATA1_FORMAT_EXT_SU) |
- HE_BITS(DATA1_UL_DL_KNOWN);
+ HE_BITS(DATA1_UL_DL_KNOWN) |
+ HE_BITS(DATA1_BW_RU_ALLOC_KNOWN);
he->data3 |= HE_PREP(DATA3_UL_DL, UPLINK, rxv[2]);
break;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 8bd8b4fe1047..3ff2a4c428ce 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -304,14 +304,16 @@ mt7921_mac_decode_he_radiotap(struct sk_buff *skb, __le32 *rxv, u32 mode)
case MT_PHY_TYPE_HE_SU:
he->data1 |= HE_BITS(DATA1_FORMAT_SU) |
HE_BITS(DATA1_UL_DL_KNOWN) |
- HE_BITS(DATA1_BEAM_CHANGE_KNOWN);
+ HE_BITS(DATA1_BEAM_CHANGE_KNOWN) |
+ HE_BITS(DATA1_BW_RU_ALLOC_KNOWN);
he->data3 |= HE_PREP(DATA3_BEAM_CHANGE, BEAM_CHNG, rxv[14]) |
HE_PREP(DATA3_UL_DL, UPLINK, rxv[2]);
break;
case MT_PHY_TYPE_HE_EXT_SU:
he->data1 |= HE_BITS(DATA1_FORMAT_EXT_SU) |
- HE_BITS(DATA1_UL_DL_KNOWN);
+ HE_BITS(DATA1_UL_DL_KNOWN) |
+ HE_BITS(DATA1_BW_RU_ALLOC_KNOWN);
he->data3 |= HE_PREP(DATA3_UL_DL, UPLINK, rxv[2]);
break;
--
2.18.0