The "hardware" switch is tied directly to a BIOS interface that will connect and
disconnect the hardware from the bus.
If you use the software interface to request the BIOS to make these changes, the HW
switch will be in an inconsistent state and LEDs may not reflect the state of the HW.
Signed-off-by: Mario Limonciello <[email protected]>
---
drivers/platform/x86/dell-laptop.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 90a3d7c..2469ad5 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -180,6 +180,10 @@ static int dell_rfkill_set(int radio, enum rfkill_state state)
int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1;
memset(&buffer, 0, sizeof(struct calling_interface_buffer));
+ dell_send_request(&buffer, 17, 11);
+ if (!(buffer.output[1] & BIT(16)))
+ return -EINVAL;
+
buffer.input[0] = (1 | (radio<<8) | (disable << 16));
dell_send_request(&buffer, 17, 11);
--
1.6.3.3